UF1717V-702Y0R3-01

(1/4) Common Mode Choke Coils(Line Filters) for AC Power Supply Conformity to RoHS Directive Compact and Separable Bobbin Type UF Series TDK common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(EMI) and radio frequency interference(RFI) from power supply lines and for prevention of multifunctioning of products such as measuring equipment and system equipment. FEATURES • Wide range of selection. • High impedance at applicable frequency. • High self-resonant frequency. PRODUCT IDENTIFICATION UF (1) (2) V - A (3) (4) Y (5) R (6) - 01 (7) (1) Core shape UF: U-type core (2) Dimensional code Length×Height (3) External shape code V: Vertical type H: Horizontal type (4) High µ material (5) Inductance value  Example) 133:13mH (6) Rated current value Example) 3R0:3.0A (7) Product management number SELECTION CHART Series Configuration Two sections bobbin types UF Two sections bobbin types (For high frequency) Type Inductance value min. Rated current (A) Handling power∗ L×I2(mH×A2) Weight (g)typ. UF1717V UF1717H UF1717V UF1815SG 0.2 to 10mH 0.2 to 10mH 10 to 60µH 50 to 350µH 0.25 to 1.6 0.25 to 1.6 1 to 3 1 to 5 0.6 0.6 0.08 1.2 3.5 3.5 3 4.6 Minimum package quantity (pieces/box) 640 480 640 1280 ∗ Handling power=(Inductance value)×(Current)2. It is possible to design within the range below this value. [Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20100118 / e93_uf.fm (2/4) Two Sections Bobbin Type UF Series FEATURES • This series is compact in size due to its use of high permeability ferrite core. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 15.5max. 11max. UF1717V/UF1717H(2 SEPARABLE BOBBIN) TYPES SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 17.5max. 1000 103YR25 17.5max. 12.5max. 1 2 2 4 L1 3 L2 3 Impedance (kΩ) 4 ø0.6 (6) 8±0.5 1 7±0.5 ø0.6 4±1 4±1 17max. 100 10 1 282Y0R5 2 3 4 8±0.5 1 7±0.5 132Y0R7 201Y1R6 Weight: 3.5g typ. 0.01 0.01 Recommended hole diameter: ø1.1 Dimensions in mm Part No. UF1717V-103YR25-02 UF1717V-702Y0R3-01 UF1717V-342Y0R4-01 UF1717V-282Y0R5-01 UF1717V-152Y0R6-01 UF1717V-132Y0R7-01 UF1717V-601Y1R0-01 UF1717V-201Y1R6-01 UF1717H-103YR25-01 UF1717H-702Y0R3-01 UF1717H-342Y0R4-01 UF1717H-282Y0R5-01 UF1717H-152Y0R6-01 UF1717H-132Y0R7-01 UF1717H-601Y1R0-01 UF1717H-201Y1R6-01 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (mH)min. 10 7 3.4 2.8 1.5 1.3 0.6 0.2 10 7 3.4 2.8 1.5 1.3 0.6 0.2 601Y1R0 0.1 DC resistance (Ω )max. 3.5 2.5 1.3 1 0.55 0.5 0.2 0.1 3.5 2.5 1.3 1 0.55 0.5 0.2 0.1 Rated current Iac(A)max. 0.25 0.3 0.4 0.5 0.6 0.7 1 1.6 0.25 0.3 0.4 0.5 0.6 0.7 1 1.6 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (MΩ ) DC.500V Temperature rise(°C) 45max. With line resistance Operating temperature Including self-temperature –20 to +120 range(°C) rise Storage temperature –20 to +85 range(°C) 260±5°C, 10±1sec Solder bath method Resistance to soldering tenperature∗1 350±5°C, 5sec max. Soldering iron method Electrical Appliance and Material Safety Applicable safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard∗2 ∗1 Pb free solder(Sn-3Ag-0.5Cu) ∗2 However, this product is not recognized by each regulations. • Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1717V UF1717H 640pieces/box 480pieces/box   • All specifications are subject to change without notice. 002-01 / 20100118 / e93_uf.fm (3/4) Two Sections Bobbin Type(For High Frequency) UF Series FEATURES • This series is designed to reduce stray capacity between windings by using a single-layer coil construction on Ni-Zn ferrite cores, which offer excellent high frequency characteristics. • This series provides excellent noise suppression for high frequency ranges including the FM band. • Since the windings are divided into two sections, this filter can also be used as a signal line with excellent withstanding voltage. 8±0.5 4 2 3 11max. 1 300Y1R2 1 4 L1 Impedance (kΩ) 17max. 1 4±1 10 600Y1R0 17.5max. ø0.6 7±0.5 UF1717V(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS L2 2 3 Weight: 3g typ. Recommended hole diameter: ø1.1 Dimensions in mm 200Y2R0 0.01 0.001 0.01 Part No. UF1717V-600Y1R0-03 UF1717V-300Y1R2-03 UF1717V-200Y2R0-03 UF1717V-100Y3R0-03 DC resistance (mΩ )max. 300 150 100 50 • Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1717V 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (µH)min. 60 30 20 10 100Y3R0 0.1 640pieces/box   Rated current Iac(A)max. 1 1.2 2 3 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (MΩ ) DC.500V Temperature rise(°C) 45max. With line resistance Operating temperature Including self-temperature –20 to +120 range(°C) rise Storage temperature –20 to +85 range(°C) 260±5°C, 10±1sec Solder bath method Resistance to soldering tenperature∗1 350±5°C, 5sec max. Soldering iron method Electrical Appliance and Material Safety Applicable safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard∗2 ∗1 Pb free solder(Sn-3Ag-0.5Cu) ∗2 However, this product is not recognized by each regulations. • All specifications are subject to change without notice. 002-01 / 20100118 / e93_uf.fm (4/4) Two Sections Bobbin Type(For High Frequency) UF Series FEATURES • This series uses a Mn-Zn ferrite core and yet it offers excellent noise suppression into the high frequencies due to its low distributed inductance construction based on a single layer winding. • This compact filters's inductance has been improved by as much as 50% compared to exsting products of compareble size while its hight profile has been reduced by approximately 30%. UF1815SG(2 SEPARABLE BOBBIN FOR HIGH FREQUENCY) TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 18max. 17max. 15.5max. 3.5±0.5 10 351Y1R0 1 4 L1 2 13±0.5 3 2 L2 1 181Y1R6 3 Impedance (kΩ) 4 10±0.5 1 ø0.7 281Y1R2 Weight: 4.6g typ. Recommended hole diameter: ø1.2 Dimensions in mm 151Y2R2 0.1 800Y3R0 650Y4R0 500Y5R0 0.01 0.001 0.01 Part No. UF1815SG-351Y1R0-01 UF1815SG-281Y1R2-01 UF1815SG-181Y1R6-01 UF1815SG-151Y2R2-01 UF1815SG-800Y3R0-01 UF1815SG-650Y4R0-01 UF1815SG-500Y5R0-01 DC resistance (mΩ )max. 300 250 130 100 50 30 25 • Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1815SG 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (µH)min. 350 280 180 150 80 65 50 0.1 1280pieces/box Rated current Iac(A)max. 1 1.2 1.6 2.2 3 4 5 Item Standard value Conditions Rated voltage(V) 80 to 280 50Hz/60Hz Dielectric withstanding Between each winding for 2000 voltage(V) 1 minute Insulation resistance Between each winding for 100min. (MΩ ) DC.500V Temperature rise(°C) 45max. With line resistance Operating temperature Including self-temperature –20 to +120 range(°C) rise Storage temperature –20 to +85 range(°C) 260±5°C, 10±1sec Solder bath method Resistance to soldering tenperature∗1 350±5°C, 5sec max. Soldering iron method Applicable safety Electrical Appliance and Material Safety Law ("DENAN"), IEC60065, UL6500, CSA C22.2 standard∗2 ∗1 Pb free solder(Sn-3Ag-0.5Cu) ∗2 However, this product is not recognized by each regulations. • All specifications are subject to change without notice. 002-01 / 20100118 / e93_uf.fm