LS60D30C

Series LS 30A to 600 Vac SIP Package DC control Part Number LS24D16C LS24D21C LS60D22C LS24D27C LS60D27C LS60D30C Description 16A, 240 Vac 21A, 240 Vac 22A, 600 Vac 27A, 240 Vac 27A, 600 Vac 30A, 600 Vac FEATURES/BENEFITS • Industry standard package • Designed for external heat-sink attachment • Over-sized thyristor ratings • Direct-copper bonding technology DESCRIPTION These solid-state single inline package (SIP) relays are designed for mounting on printed circuit boards. The Series LS relays facilitate heat sinking by providing an interface surface. The relays are designed with 16A, 25A and 50A thyristors. They can switch loads with high starting currents. The nominal switched currents depend on the size of the heat sink and are limited by the cross section of the tracks of the printed circuit (mainly 25A/30A). The relays use a direct-bonded copper substrate for thermal efficiency, thermal stress performance and long-life expectancy. APPLICATIONS • Motor control — Pumps, reversing, integration of relays in terminal boxes • Lamp control — Infrared drying, traffic lights, theater lighting APPROVALS All models are UL recognized. UL File Number: E128555. Part Number Explanation LS 24 D 16 C NOTES 1) Line Voltage (nominal): 24 = 240 Vac; 60 = 600 Vac 2) Switch Type: D = Zero-cross turn-on 3) Control Range: C = 4-14 Vdc (N = 8-32 Vdc also available) MECHANICAL SPECIFICATION Hot surface: 1.48 (37.6) .01 (0.3) Hot surface: .69 (17.5) 4 .96 (24.5) 4 3 2 1 .02 (.55) .31 (7.83) Ø1 0.2 (5.08) 0.4 0.5 (12.7) (10.16) 0.3 (7.83) 1.82 (43.6) .07 (1.7) .25 (6.3) .07 (1.7) Top view Hole Ø .06 (1.6) 0.1 (2.54) WEIGHT: 0.53 oz. (15g) TOLERANCES: + 0.01 – Figure 1 — LS relays; dimensions in inches (mm) (See Figure 12 for LS with HS1) TYPICAL APPLICATION L1 L1 0.3 (7.6) (1.5 x 1.5) .06 x .06 MOV on the PCB SSR Or BLOCK DIAGRAM Load 3+ Rc Ic 1~ Vc 4– MOV on the PCB Load SSR N N 2~ Figure 2 — LS relays © 2003 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com Figure 3 — LS relays LS 1 LS\032003\Q2 Series LS INPUT (CONTROL) SPECIFICATION Min Control Range Input Current Range Must Turn-off Voltage Input Resistance (Typical) 4 6.5 Max 14 30 1 440 Units Vdc mAdc Vdc Ohms Input Current (mA) CONTROL CHARACTERISTIC 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 OUTPUT (LOAD) SPECIFICATION Min Operating Range LS24 LS60 Peak Voltage LS24D16C LS60D22C Load Current Range LS24D16C LS24D21C LS60D22C LS24D27C LS60D27C LS60D30C *Limited by the heat sink Maximum Surge Current Rating (Non-Repetitive) (See Figure 6) LS24D16C LS24D21C LS60D22C LS24D27C LS60D27C LS60D30C On-State Voltage Drop Power Dissipation (W) Max 280 600 Unit Vrms Vrms 20 Control Voltage (V) 12 24 Figure 4 — LS relays THERMAL CHARACTERISTICS FW150 (~ 3°C/W) ~ 600 1200 Vpeak Power Dissipation (W) Full on state 15 FW100 (~ 4°C/W) ~ Vpeak 6°C/W 10 .005 .005 .005 .005 .005 .005 16* 25* 25* 30* 30* 30* Arms Arms Arms Arms Arms Arms 5 Without heat sink 0 0 5 10 15 20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C) Load Current (Arms) Figure 5a — LS24D16C relay 35 30 Power Dissipation (W) Full on state 25 20 15 10 5 FW100 (~ 4°C/W) ~ 6°C/W FW150 (~ 3°C/W) ~ 160 250 300 600 600 1000 Apeak Apeak Apeak Apeak Apeak Apeak Without heat sink 0 0 5 10 15 20 25 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C) Load Current (Arms) Figure 5b — LS24D21C, LS60D22C relays 40 All relays Zero-Cross Window (Typical) All relays Off-State Leakage Current (60Hz) All relays 1.6 V Full on state 30 FW100 (~ 4°C/W) ~ FW150 (~ 3°C/W) ~ 20 6°C/W ±12 V 10 Without heat sink 0 0 5 10 15 20 25 30 35 0 10 20 30 40 50 60 70 80 90 100 1 mA Load Current (Arms) Ambient Temperature (°C) Figure 5c — LS24D27C, LS60D27C, LS60D30C relays LS 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2003 TELEDYNE RELAYS LS\032003\Q2 Series LS OUTPUT (LOAD) SPECIFICATION (continued) Min Turn-On Time (60Hz) All relays Turn-Off Time (60Hz) All relays Off-State dv/dt All relays Operating Frequency All relays I2t for match fusing (