0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
T3DSO1000-WIFI

T3DSO1000-WIFI

  • 厂商:

    TELEDYNE

  • 封装:

  • 描述:

    WIFI INTFC OPT T3DSO1000 4CH SER

  • 数据手册
  • 价格&库存
T3DSO1000-WIFI 数据手册
T3DSO1000 Data Sheet Oscilloscopes Debug with Confidence 100 MHz – 200 MHz Front panel of the four channel series Front panel of the two channel series Tools for Improved Debugging ● ● ● ● ● ● Long Capture – 7 Mpts/Ch and 14 Mpts interleaved.  Capture more time and show more waveform detail. Math and Measure – 7 basic math functions plus FFT and 38 automatic measurement parameters.  Extract results from waveforms and measurements. Connectivity – USB for mass storage, printing and PC control, plus LAN for fast data transfer.  Save data for external analysis and screen images for reports. Serial Bus Trigger and Decode – I2C, SPI, UART, RS232, CAN, LIN.  Debug serial buses directly in your Oscilloscope. Waveform Sequence Recorder – record and play back up to 80,000 waveforms.  Replay the changing waveform history. Optional MSO – 16 Digital Channels (4 channel series only).  Add mixed signal debugging to your Oscilloscope. Key Specifications Bandwidth 100 MHz, 200 MHz Channels 2 or 4 Memory up to 7 Mpts/Ch (14 Mpts interleaved) Sample Rate up to 500 MS/s / 1 GS/s interleaved Display 7" Bright TFT LCD (800 x 480) Connectivity USB Host, USB Device, LAN PRODUCT OVERVIEW T3DSO1102: 2 Channel 100 MHz T3DSO1104: 4 Channel 100 MHz T3DSO1204: 4 Channel 200 MHz Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel model is available with 100 MHz analog bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single memory module with 14 Mpts of sample memory. The four channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 7 Mpts. When only a single channel per ADC is active, the maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. The T3DSO1000 series employs a new generation of high speed display technology that provides excellent signal clarity, fidelity and performance. The system noise floor is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode). The T3DSO1000 also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Teledyne Test Tools latest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering. Serial bus decoding for IIC, SPI, UART, CAN, LIN bus types is included. The models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Key Features ● ● ● 100 MHz, 200 MHz bandwidth models Two channel series have one 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has sample rate of 1 GSa/s The newest generation of high speed display technology Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode) Supports 256-level intensity grading and color display modes Record length up to 14 Mpts Digital trigger system Another powerful addition is the new 1 million point FFT math function that gives the T3DSO1000 very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response. The features and performance of Teledyne Test Tools new T3DSO1000 cannot be matched in this price class. The four channel series includes even more functions, including: searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application that allows remote control via web browser. ● ● ● ● ● › › › 2 ● Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN Video trigger, supports HDTV Low background noise with voltage scales from 500 μV/div to 10 V/div 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event. History waveform record (History) function, maximum recorded waveform length is 80,000 frames. Models and key Specification Model T3DSO1102 T3DSO1104 T3DSO1204 Bandwidth 100 MHz 200 MHz SamplingRate (Max.) Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s Channels 4 (four channel series) 2+EXT (two channel series) Memory Depth (Max.) 7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) Waveform Capture Rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video Serial Trigger and decoder (Standard) IIC, SPI, UART/RS232, CAN, LIN 16 Digital Channels (four channel series only, option) Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH USB AWG module (four channel series only, option) One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts Bode plot ( four channel series only) Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points USB WIFI adapter (four channel series only, option) 802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user (TP-Link TL-WN725N) I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Teledyne Test Tools MSO) Probe (Std) 2/4 pcs passive probe T3PP300 Display 7 inch TFT-LCD (800 x 480) Weight Four channel series: Without package 2.6 Kg; With package 3.8 Kg Two channel series: Without package 2.5 Kg; With package 3.5 Kg ● ● ● ● ● Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions ● Bode plot (four channel series only) ● Search and navigate (four channel series only) ● USB AWG module (four channel series only, option) ● USB WIFI adapter (four channel series only, option) ● Web Browser based control (four channel series only) Math functions (FFT, addition, subtraction, multiplication,division, integration, differential, square root) ● Large 7 inch TFT-LCD display with 800 * 480 resolution Preset key can be customized for user settings or factory “defaults” ● 1 Mpts FFT Math and measurement functions use all sampled data points (up to 14 Mpts) ● Security Erase mode ● High Speed hardware based Pass/ Fail function ● 2/4 pcs passive probe T3PP300 ● ● Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Trigger Out Supports SCPI remote control commands Supports Multi-language display and embedded online help MSO, 16 digital channels (four channel series only, option) 3 FUNCTION & CHARACTERISTICS 7 inch TFT-LCD display and 10 one-button menus When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s Front panel of the four channel series Front panel of the two channel series ● ● ● 7-inch TFT-LCD display with 800 * 480 resolution Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, Print Record Length of Up to 14 Mpts (single channel/pair mode), 7 Mpts/CH (two channels/ pair mode) Using hardware-based Zoom technologies and max record length of up to 14 Mpts, users are able to over-sample to capture longer time periods at higher resolution and use the zoom feature to see more details within each signal. 4 The four channel series has two 1 GSa/s ADC chips (channel 1 and 2 share one, channel 3 and 4 share another), so that each channel can achieve sample rates up to 500 MSa/and work on bandwidths of 200 MHz when all channels are enabled. Waveform Capture Rate Up to 400,000 wfm/s With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or low-probability events. 256-Level Intensity Grading and Color Temperature Display History Waveforms (History) Mode and Segmented Acquisition (Sequence) New display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. Playback the latest triggered events using the history function. Segmented memory collection will store trigger events into multiple (Up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame. True measurement to 14 M points The color temperature display is similar to the intensitygraded trace function, but the trace occurrence is represented by different colors (color “temperature”) as opposed to changes in the intensity of one color. Red colors represents the more frequent events, while blue is used to mark points that occur lest frequently. At any one timebase, T3DSO1000 can measure using all 14 M sample points. This ensures the accuracy of measurements while the math coprocessor decreases measurement time and increases ease-of-use. Serial Bus Decoding Function (Standard) Gate and Zoom Measurement T3DSO1000 displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format. Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility. 5 FUNCTION & CHARACTERISTICS 1 M points FFT 16 Digital Channels/MSO (four channel series only, option) The new math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. 16 digital channels enables users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument. Color coded logic levels clearly differentiate high and low states. Hardware-Based High Speed Pass/Fail function Search and Navigate (four channel series only) The T3DSO1000 utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass/Fail decisions each second. Easily generate user defined test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing. Customizable Default Key The T3DSO1000 4 channel series can search events specified by the user in a frame. It can also navigate by time (delay position) and historical frames. The current parameters of the oscilloscope can be preset to Default Key through the Save menu. 6 Bode Plot (four channel series only) USB 25 MHz AWG Module (four channel series only, option) The four channel series supports an optional USB 25 MHz function/arbitrary waveform generator that is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the Teledyne Test Tools PC software. Complete Connectivity T3DSO1000 can control the USB AWG module, control an independent Teledyne Test Tools T3AFG instrument, scan an object’s amplitude and phase frequency response, and display the data as a Bode Plot. It can also show the result lists, and export the data to a USB disk. USB WiFi Adapter (four channel series only, option) Back panel of the four channel series Back panel of the two channel series T3DSO1000 supports USB Host, USB Device (USB-TMC), LAN(VXI-11), Pass/Fail and Trigger Out. Web control (four channel series only) USB WiFi Adapter WiFi control of instrumentation can provide a convenient and safe method of configuring and collecting data. This new feature works with a Teledyne Test Tools approved WiFi adapter to provide wireless control and communications with Teledyne Test Tools 4 channel scopes. The approved adapter is the TP-Link TL-WN725N (not supplied). With the new embedded web server, users can control the 4 channel scopes from a simple web page. This provides remote troubleshooting and monitoring capabilities. 7 SPECIFICATIONS Acquire System Sampling Rate Memory Depth Peak Detect Average Eres Waveform interpolation 1 GSa/s (single channel/pair), 500 MSa/s (two channels/pair) Max 14 Mpts/Ch (single channel/pair), 7 Mpts/Ch (two channels/pair) 2 nsec (Four channel series) 4 nsec (Two channel series) Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable Sin(x)/x, Linear Input Channels Coupling Impedance Max.Input voltage CH to CH Isolation Probe attenuation 4 (Four channel series) 2+EXT (Two channel series) DC, AC, GND DC: (1 MΩ ± 2 %) || (15 pF ± 2 pF) (Four channel series) DC: (1 MΩ ± 2 %) || (18 pF ± 2 pF) (Two channel series) 1 MΩ ≤ 400 Vpk (DC + Peak AC 40 dB 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X Vertical System Bandwidth (–3 dB ) Vertical Resolution Vertical Scale (Probe 1X) Offset Range (Probe 1X) Bandwidth Limit Bandwidth Flatness Low Frequency Response (AC – 3 dB) Noise SFDR including harmonics DC Gain Accuracy Offset Accuracy Risetime Overshoot (500 ps Pulse) 200 MHz (T3DSO1204) 100 MHz (T3DSO1102 / T3DSO1104) 8-bit 500 μV/div – 10 V/div (1-2-5 sequence ) 500 μV – 150 mV: ± 2 V 152 mV – 1.5 V: ± 20 V 20 MHz ± 40% DC – 10 % (BW): ± 1 dB 10 % – 50 % (BW): ± 2 dB 50 % – 100 % (BW): + 2 dB/-3 dB ≤ 10 Hz (at input BNC) ST-DEV ≤ 0.5 division (< 1 mV/div) ST-DEV ≤ 0.2 division (< 2 mV/div) ST-DEV ≤ 0.1 division (≥ 2 mV/div) ≥ 35 dB ≤ ± 3.0%: 5 mV/div – 10 V/div ≤ ± 4.0%: ≤ 2 mV/div ± (1 % * Offset + 1.5 % * 8 * div + 2 mV): ≥ 2 mV/div ± (1 % * Offset + 1.5 % * 8 * div + 500 uV): ≤ 1 mv/div Typical 1.8 ns (T3DSO1204) Typical 3.5 ns (T3DSO1102 / T3DSO1104) < 10 % Horizontal System Timebase Scale Channel Skew Waveform Capture Rate Intensity grading Display Format Timebase Accuracy Roll Mode 8 1.0 ns/div – 100 s/div < 100 ps Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) 256 Levels Y-T, X-Y, Roll ± 25 ppm 50 ms/div – 100 s/div (1-2-5 step) Trigger System Trigger Mode Trigger Level Holdoff Range Trigger Coupling Coupling Frequency Response Coupling Frequency Response components below 10 KHz Trigger Sensitivity Trigger Jitter Trigger Displacement Auto, Normal, Single Internal: ± 4.5 div from the center of the screen EXT: ± 0.6 V (Two channel series) EXT/5: ± 3 V (Two channel series) 80 ns – 1.5 s AC DC LFRJ HFRJ Noise RJ DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 8 Hz LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz HFRJ: Attenuates the high-frequency components above 1.2 MHz DC: Passes all components of the signal LFRJ: Blocks the DC component and attenuates the low-frequency components below 10 KHz HFRJ: Attenuates the high-frequency components above 500 KHz Internal: ± 0.2 div EXT (Two channel series): ± 0.4 div DC – Max BW 0.6 div EXT (Two channel series): 200 mVpp DC – 10 MHz 300 mVpp 10 MHz – BW frequency EXT/5 (Two channel series): 1 Vpp DC – 10 MHz 1.5 Vpp 10 MHz – BW frequency < 100 ps Pre-Trigger: 0 – 100 % Memory Delay Trigger: 0 to 10,000 div Edge Trigger Slope Source Rising, Falling, Rising & Falling All channels/ EXT/ (EXT/5)/ AC Line (Two channel series) All channels/ AC Line (Four channel series) Slope Trigger Slope LimitRange Source TimeRange Resolution Rising, Falling ,,>< All channels 2 ns – 4.2 s 1 ns Pulse Trigger Polarity Limit Range Source Pulse Range Resolution +wid , -wid ,,>< All channels 2 ns ~ 4.2 s 1 ns Video Trigger Signal Standard Source Sync Trigger condition NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom All channels Any, Select Line, Field 9 SPECIFICATIONS Window Trigger Window Type Source Absolute, Relative All channels Interval Trigger Slope Limit Range Source Time Range Resolution Rising, Falling ,,>< All channels 2 ns ~ 4.2 s 1 ns Dropout Trigger Timeout Type Source Slope Time Range Resolution Edge, State All channels Rising, Falling 2 ns ~ 4.2 s 1 ns Runt Trigger Polarity Limit Range Source Time Range Resolution +wid , -wid ,,>< All channels 2 ns ~ 4.2 s 1 ns Pattern Trigger Pattern Setting Logic Source Limit Range Time Range Resolution Invalid, Low, High AND, OR, NAND, NOR All channels ,,>< 2 ns ~ 4.2 s 1 ns Serial Trigger I2C Trigger Condition Source (SDA/SCL) Data format Limit Range Data Length R/W bit SPI Trigger Condition Source (CS/CL/Data) Data format Data Length Bit Value Bit Order 10 Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data, Data Length All channels Hex EEPROM: =, >, < EEPROM: 1 byte Addr & Data: 1 ~ 2 byte Data Length: 1 ~ 12 byte Addr & Data: Read, Write, Don’t care Data All channels Binary 4 ~ 96 bit 0, 1, X LSB, MSB UART / RS232 Trigger Condition Source (RX/TX) Data format Limit Range Data Length Data Width Parity Check Stop Bit Idle Level Baud (Selectable) (Custom) CAN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) Baud Rate (Custom) LIN Trigger Condition Source ID Data Format Data Length Baud Rate (Selectable) Baud Rate (Custom) Start, Stop, Data, Parity Error All channels Hex =, >, < 1 byte 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.5 bit, 2 bit High, Low 600/1200/2400/4800/960019200/38400/57600/115200 bit/s 300 bit/s ~ 334000 bit/s All, Remote, ID, ID + Data, Error All channels STD (11 bit), EXT (29 bit) Hex 1~2 byte 5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s 5 kbit/s ~ 1 Mbit/s Break, Frame ID, ID+Data, Error All channels 1 byte Hex 1 ~ 2 byte 600/1200/2400/4800/9600/19200 bit/s 300 bit/s ~ 20 kbit/s Serial Decoder I2C Decoder Signal Address Threshold List SPI Decoder Signal Edge Select Idle Level Bit Order Threshold List UART / RS232 Decoder Signal Data Width Parity Check Stop Bit Idle Level Threshold List CAN Decoder Signal Source Threshold List LIN Decoder LIN Specification Package Revision Threshold List SCL, SDA 7 bits, 10 bits -4.5 ~ 4.5 div 1 ~ 7 lines SCL,MISO, MOSI, CS * NOTE 2 channel scopes can only use 2 signal identifiers Rising, Falling Low, High MSB, LSB -4.5 ~ 4.5 div 1 ~ 7 lines RX, TX 5 bit, 6 bit, 7 bit, 8 bit None, Odd, Even 1 bit, 1.5 bit, 2 bit Low, High -4.5 ~ 4.5 div 1 ~ 7 lines CAN_H, CAN_L CAN_H, CAN_L, CAN_H-CAN_L -4.5 ~ 4.5 div 1 ~ 7 lines Ver1.3, Ver2.0 -4.5 ~ 4.5 div 1 ~ 7 lines 11 SPECIFICATIONS Measurement Source Number of Measurements Measurement Range Measurement Parameters (38 Types) Vertical (Voltage) Horizontal( Time) Delay Cursors Statistics Counter 12 All channels, All channels in Zoom, Math, All References, History Display 5 measurements at the same time Screen region, Gate region Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal, or between max and min in an unimodal signal Top Value of most probable higher state in a bimodal waveform Base Value of most probable lower state in a bimodal waveform Mean Average of all data values Cmean Average of data values in the first cycle Stdev Standard deviation of all data values Cstd Standard deviation of all data values in the first cycle VRMS Root mean square of all data values Crms Root mean square of all data values in the first cycle FOV Overshoot after a falling edge; (base-min)/Amplitude FPRE Overshoot before a falling edge; (max-top)/Amplitude ROV Overshoot after a rising edge; (max-top)/Amplitude RPRE Overshoot before a rising edge; (base-min)/Amplitude Level@X the voltage value of the trigger point Period Period for every cycle in waveform at the 50 % level, and positive slope Freq Frequency for every cycle in waveform at the 50 % level, and positive slope +Wid Width measured at 50 % level and positive slope -Wid Width measured at 50 % level and negative slope Rise Time Duration of rising edge from 10 – 90 % Fall Time Duration of falling edge from 90 – 10 % Bwid Time from the first rising edge to the last falling edge, or the first falling edge to the last rising edge at the 50 % crossing +Dut Ratio of positive width to period -Dut Ratio of negative width to period Delay Time from the trigger to the first transition at the 50 % crossing Time@Level Time from the trigger to each rising edge at the 50 % crossing. When Statistics is Off, it shows the time from the trigger to the last rising edge at the 50 % crossing. When Statistics is On, it shows the Current, Mean, Min, Max, Standard ­Deviation of time from the trigger to each rising edge at the 50 % crossing in multiple frames (number = Count). Phase Calculate the phase difference between two edges FRR Time between the first rising edges of the two channels FRF Time from the first rising edge of channel A to the first falling edge of channel B FFR Time from the first falling edge of channel A to the first rising edge of channel B FFF Time from the first falling edge of channel A to the first falling edge of channel B LRR Time from the first rising edge of channel A to the last rising edge of channel B LRF Time from the first rising edge of channel A to the last falling edge of channel B LFR Time from the first falling edge of channel A to the last rising edge of channel B LFF Time from the first falling edge of channel A to the last falling edge of channel B Skew Time of source A edge minus time of nearest source B edge Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2) Track: Time X1, X2, (X1-X2) Current, Mean, Min, Max, Stdev, Count Hardware 6 bit counter( channels are selectable) Math Function Operation FFT window FFT display Number of Decoders + , - , * , / , FFT , d/dt , ∫dt , √ Rectangular, Blackman, Hanning, Hamming, Flattop Full Screen, Split, Exclusive 2 USB AWG Module (four channel series only, option) Channel Max. Output Frequency Sampling Rate Frequency Resolution Frequency Accuracy Vertical Resolution AmplitudeRange Waveform Type Output impedance Protection 1 25 MHz 125 MSa/s 1 μHz ± 50 ppm 14-bits -1.5 ~ +1.5 V (50 Ω) -3 ~ +3 V (High-Z) Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms 50 Ω ± 2 % Over-Voltage Protection, Current-Limiting Protection Sine Frequency Offset Accuracy (10 kHz) Amplitude flatness (10 kHz, 5 Vpp) SFDR HD 1 μHz ~ 25 MHz ± (1 % * Offset Setting Value + 1 mVpp) ± 0.3 dB DC ~ 1 MHz -60 dBc 1 MHz ~ 5 MHz -55 dBc 5 MHz ~ 25 MHz -50 dBc DC ~ 5 MHz -50 dBc 5 MHz ~ 25 MHz -45 dBc Square/Pulse Frequency Duty Cycle Rise/Fall time Overshoot (1 kHz,1 Vpp, Typical) Pulse Width Jitter 1 μHz ~ 10 MHz 1 % ~ 99 % < 24 ns (10 % ~ 90 %) < 3 % (typical 1 kHz, 1 Vpp) > 50 ns < 500 ps + 10 ppm Ramp Frequency Linearity (Typical) Symmetry 1 μHz ~ 300 kHz < 0.1 % of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100 % Symmetry) 0 % ~ 100 % (Adjustable) DC Offset range Accuracy ± 1.5 V (50 Ω) ± 3 V (High-Z) ± (|offset| * 1 % + 3 mV) Noise Bandwidth > 25 MHz (-3 dB) Arbitrary Wave Frequency Wave Length Sampling Rate Waveform Entry 1 μHz ~ 5 MHz 16 kpts 125 MSa/s EasyScope and USB-Stick 13 SPECIFICATIONS Digital Channels (four channel series only, option) No. of Channels Max. Sampling Rate Memory Depth Min. Detectable Pulse Width Level Group Level Range Logic Type Skew[2] 16 1 GSa/s 14 Mpts/CH 4 ns D0~D7, D8~D15 -8 V ~ 8 V TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom D0~D15: ±1 sampling interval Analog To Digital: ± (1 sampling interval +1 ns) I/O Standard Pass/Fail USB Host, USB Device, LAN, Pass/Fail, Trigger Out 3.3 V TTL Output Display (Screen) Display Type Display Resolution Display Color Contrast (Typical) Backlight Range 7-inch TFT LCD 800 × 480 24 bit 500:1 300 nit 8 x 14 divisions Display (Waveform) Display Mode Persist Time Color Display Screen Saver Language Dot, Vector Off, 1 Sec, 5 Sec, 10 Sec, 30 Sec, Infinite Normal, Color 1 min, 5 min, 10 min, 30 min, 1 hour, Off Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, ­Russian, Italian, Portuguese Environments Temperature Humidity Height Electromagnetic Compatibility Safety Operating: 10 ~ +40 Non-operating: -20 ~ +60 Operating: 85 % RH, 40 Deg C, 24 hours Non-operating: 85 % RH, 65 Deg C, 24 hours Operating: ≤ 3000 m Non-operating: ≤ 15,266 m 2004/108/EC) Execution Standard EN 61326-1:2006 EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008 2006/95/EC Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010 Power Supply Input Voltage Frequency Power 100 ~ 240 VAC, CAT II, Auto selection 50/60/400 Hz 25 W Max Mechanical (Four channel series) Dimensions Weight Length: 312 mm / Width: 132.6 mm / Height: 151 mm N.W: 2.6 kg; G.W: 3.8 kg Mechanical (Two channel series) Dimensions Weight 14 Length: 312 mm / Width: 134 mm / Height: 150 mm N.W: 2.5 Kg; G.W: 3.5 Kg Probes and Accessories Probe Model Passive Probes T3PP300 Picture Passive Probe, Bandwidth: 300 MHz Description Current Probes T3CP50 Bandwidth: 50 MHz, Max. continuous current: 30 Arms, Peak current: 50 A Switch Ratio: 100 mV/A, 1 V/A, Accuracy: 1 V/A (±1 % ±1 mA), 100 mV/A (±1 % ±10 mA), DC 12 V /1.2 A power adapter Differential Voltage Probes T3DP7000 Bandwidth: 100 MHz Differential Range: 7000 V (DC + Peak AC), 100X/1000X, Accuracy: ±2 %, DC 5 V/1 A USB adapter High Voltage Probe T3HVP100 Bandwidth: 40 MHz Voltage Range: DC 10 KV, AC (rms): 7 KV (sine), AC (Vpp): 20 KV (Pulse) 1000X, Accuracy: ≤ 3 % USB AWG Module T3DSO1000FGMOD Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the EasyScope PC software Ordering information Product Name Standard Accessories Optional Accessories T3DSO1102 100 MHz Two Channels T3DSO1104 100 MHz Four Channels T3DSO1204 200 MHz Four Channels USB Cable -1 Quick Start -1 Passive Probe -4 / 2 Certification -1 Power Cord -1 16 Channel MSO Software (four channel series only) T3DSO1000-MSO 16 Channel Logic Analyzer Lead (four channel series only) T3DSO1000-LS (Requires T3MSO1000 Software) AWG Software (four channel series only) T3DSO1000-FG USB AWG Module Hardware (four channel series only) T3DSO1000-FGMOD (Requires T3DSO1000-FG) WIFI Software (four channel series only) T3DSO1000-WIFI High Voltage Probe T3HVP100 Current Probes T3CP50 Differential Probes T3DP7000 15 ABOUT TELEDYNE TEST TOOLS Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-tomarket. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Distributed by: Teledyne LeCroy (US Headquarters) 700 Chestnut Ridge Road Chestnut Ridge, NY. USA 10977-6499 Phone: Fax Sales: Phone Support: Email Sales: Email Support: Web Site: 800-553-2769 or 845-425-2000 845-578-5985 1-800-553-2769 contact.corp@teledynelecroy.com support@teledynelecroy.com http://teledynelecroy.com/ Teledyne LeCroy (European Headquarters) Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: Fax: Phone Service: Phone Support: Email Sales: Email Service: Email Support: Web Site: +49 6221 82700 +49 6221 834655 +49 6221 8270 85 +49 6221 8270 28 contact.gmbh@teledynelecroy.com service.gmbh@teledynelecroy.com tlc.t3.appsupport.eu@teledyne.com http://teledynelecroy.com/germany teledynelecroy.com © 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools.
T3DSO1000-WIFI 价格&库存

很抱歉,暂时无法提供与“T3DSO1000-WIFI”相匹配的价格&库存,您可以联系我们找货

免费人工找货