WaveSurfer 10
Oscilloscopes
1 GHz, 10 GS/s
Key Features
•
•
•
1 GHz, 10 GS/s, up to 16 Mpts/ch
MAUI - Advanced User Interface
The WaveSurfer 10 combines the MAUI advanced user interface
– Designed for Touch
– Built for Simplicity
– Made to Solve
with powerful waveform processing, in addition to advanced math,
aveScan - Advanced Search
W
and Find
hardware, and compact form factor the WaveSurfer 10 is unique among
• L abNotebook Documentation and
Report Generation
• 10.4” Touch Screen Display
• Spectrum Analyzer Mode
• Power Analysis Software
• S erial Trigger and Decode
– I C, SPI, UART
– CAN, LIN, FlexRay, SENT
– Ethernet 10/100BaseT,
USB 1.0/1.1/2.0, USB2.0-HSIC
– Audio (I S, LJ, RJ, TDM)
– MIL-STD-1553, ARINC 429
– MIPI D-PHY, DigRF 3G, DigRF v4
– Manchester, NRZ
• A dvanced Debug Toolkit adds:
– 10 GS/s on all 4 channels
– 16 Mpts/ch memory (32 Intlv’d)
– Sequence Mode Segmented
Memory
– History Mode Waveform
Playback
– 13 Additional Math Operators
– 2 Math Functions
2
2
measurement and debug tools, to quickly analyze and find the root
cause of problems. With a 10.4” touch screen display, high performance
1 GHz oscilloscopes.
MAUI - A New Wave of Thinking
Advanced Debug Toolkit
MAUI is the most advanced
With the addition of the Advanced
oscilloscope user interface. MAUI
Debug Toolkit, the WaveSurfer 10
is designed for touch; all important
becomes an unparalleled debug and
oscilloscope controls are accessed
analysis machine adding 10 GS/s
through the intuitive touch screen.
sample rate on 4 channels, 32 Mpts
MAUI is built for simplicity; time
of memory, sequence mode, history
saving shortcuts and intuitive dialogs
mode, 13 additional math functions,
simplify setup. MAUI is made to solve;
and 2 simultaneous math traces.
deep set of debug and analysis
tools help identify problems and find
solutions quickly.
Capture Debug, Analyze,
Document
Easily accessible measurement, math
Uncompromised Performance
and debug tools, plus a wide variety of
Many 1 GHz oscilloscopes are avail-
serial data protocol decoders, and ac-
able at attractive entry-point prices,
tive probes ensure the WaveSurfer 10
however, they are often limited in
can capture and analyze any type of
sample rate, memory or features. The
waveform and simplify the debug pro-
WaveSurfer 10 provides uncompro-
cess. The LabNotebook tool provides
mised 1 GHz performance with up
a fast way to save waveforms, save
to 10 GS/s per channel and 32 Mpts
setups and screen images, report
of memory.
results, and view offline.
MAUI – A NEW WAVE OF THINKING
MAUI is the most advanced oscilloscope user interface
developed to put all the power and capabilities of the modern
oscilloscope right at your fingertips. Designed for touch;
all important oscilloscope controls are accessed through the
intuitive touch screen. Built for simplicity; time saving
shortcuts and intuitive dialogs simplify setup. Made to solve;
a deep set of debug and analysis tools helps identify problems
and find solutions quickly.
Oscilloscopes are constantly evolving to meet the rapidly changing test and measurement needs of today’s cutting edge
designs. Additional complexity and capabilities are introduced with each new feature, and in some cases when capabilities
of other instruments like a protocol analyzer, function generator or logic analyzer are added. With all this added capability
the oscilloscope becomes complex and cumbersome to use. The traditional user interface consisting of knobs, buttons,
soft keys and nested menus is unmanageable and more buttons are typically added to access the new functionality.
MAUI solves the complexity problem. MAUI eliminates the overwhelming number of buttons and knobs providing an
intuitive user interface that is designed for touch, built for simplicity and made to solve without sacrificing any features or
cutting edge test capabilities.
Designed for Touch
MAUI is designed for touch. All
important controls for vertical,
horizontal and trigger are always
one touch away. Touch the
waveform to position and drag a
box around it to zoom in for more
details. Position cursors, configure
measurements and interact with
tables all through simple
touch operation.
2
Built for Simplicity
A
MAUI is built for simplicity. Basic
waveform viewing and measure-
B
ment tools as well as advanced
math and analysis capabilities are
seamlessly integrated in a single
user interface. Time saving short-
C
cuts and intuitive dialogs simplify
setup and shorten debug time.
D
A
Access shortcuts to analysis tools
by touching the waveform.
C
Channel, timebase and trigger
descriptors provide easy access to
controls without navigating menus.
B
Configure parameters by touching
measurement results.
D
Shortcuts to commonly used functions
are displayed at the bottom of the
channel, math and memory menus.
Made to Solve
MAUI is made to solve. Measure all
aspects of a waveform to identify
problems. Debug with a large set of
time saving tools to find the cause
of problems. Solve problems fast
with powerful analysis tools.
3
ADVANCED TOOLS FOR WAVEFORM ANALYSIS
Embedded Controller Design
and Debug
Save time when working with embedded
controllers by adding high-performance
mixed signal capability with the
WaveSurfer 10. Capture digital signals
up to 250 MHz with up to 10 Mpts/Ch
memory, 1 GS/s and 18 channels.
Quickly and easily isolate specific
serial data events with I2C, SPI, UART,
RS-232, USB 1.0/1.1/2.0, USB2-HSIC,
10/100Base T ENET, Audio (I2S, LJ, RJ,
TDM), MIL-STD-1553, ARINC 429,
MIPI D-PHY, DigRF, CAN, CAN FD, LIN,
FlexRay, SENT, Manchester, and NRZ
trigger and decode options.
WaveScan Advanced Search
and Find Tool
LabNotebook Documentation
and Report Generation Tool
Pass/Fail Mask Testing
Quickly search waveforms for
Save all results and data with a
identifies problems and marks the
runts, glitches or other anomalies
single button press and create
location. A history of the pass/fail
with WaveScan.
custom reports with LabNotebook.
results can be displayed on the screen.
Enhanced Resolution
Advanced Math and Measure
WaveStream Fast Viewing Mode
The enhanced resolution (ERES)
Use automatic measurement param-
WaveStream provides a vibrant,
feature improves vertical resolu-
eters with statistics and histicons as
intensity graded (256 levels) display
tion of the oscilloscope resulting
well as math functions to understand
with a fast update to closely
in cleaner traces and the ability to
every waveform detail.
simulate the look and feel of an
see more signal details. Up to
3 bits of ERES can be applied.
4
Built-in masking testing quickly
analog oscilloscope.
LabNotebook Documentation Tool
LabNotebook is a one-button tool to save and restore waveforms, measurements
and settings without navigating multiple menus. Custom reports can be created and
easily shared; saved waveforms can be measured and analyzed later both on the
oscilloscope or offline using the WaveStudio PC Utility.
Waveform
Screen Capture
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
REPORT
Waveform
Waveform
Screen Capture
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
Screen Capture
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
WaveStudio Offline Analysis Tool
WaveStudio is a fast and easy way to analyze acquired waveforms offline. Offline
Advanced Probe Interface
The advanced active probe
interface gives tremendous
flexibility for measuring high
voltages, high frequencies,
currents, or differential signals.
High Impedance Active Probes
High Bandwidth
Differential Probes
High Voltage Differential Probes
tools include x and y axis cursors for quick measurements and 21 built-in automatic
measurements for more precise and accurate results. WaveStudio can also connect
to the oscilloscope for direct data transfer to the PC. Data saved with LabNotebook
can be shared with others using WaveStudio for easy collaboration.
High Voltage Passive Probes
Current Probes
5
ADVANCED DEBUG TOOLKIT
The WaveSurfer 10M includes the
Advanced Debug Toolkit software
A
which makes it an unparalleled
debug and analysis machine. The
high sample rate of 10 GS/s on all 4
channels, 32 Mpts of memory,
sequence mode segmented
memory, history mode waveform
B
playback, 13 additional math
C
functions, and 2 simultaneous
math traces, all included in this
powerful debug package, enable
the WaveSurfer 10M to perform
D
advanced analysis on long captures
with 10x oversampling to find the
root cause of problems.
6
A
With 10 GS/s and 16 Mpts per channel every detail of
a signal will be captured and displayed. In 4 channel
operation 1.6ms of data can be captured at full sample
rate, in 2 channel mode, 3.2ms, to ensure no detail or
anomaly is missed.
C
B
Configure and view 2 simultaneous math traces, each
math trace can perform dual math operation enabling
complex analysis and faster troubleshooting.
D
13 additional math operators are added to the already
wide variety of math functions to allow deeper
analysis. Included additional functions are absolute
value, average (summed or continuous), envelope,
enhanced resolution, exp (base e), exp (base 10),
floor, invert, log (base e), log (base 10), reciprocal,
roof, and trend.
Histicons display the statistical distribution of each
measurement parameter. Anomalies in measurement
data can quickly be seen and then analyzed to find
the root cause of problems faster. Histicons are autoscaled so outliers can never be missed.
Advanced Waveform Capture
with Sequence Mode
Use Sequence mode to store up to
5,000 triggered events as “segments”
into memory. This can be ideal when
capturing many fast pulses in quick
succession or when capturing events
separated by long time periods.
Sequence mode provides timestamps
for each acquisition and minimizes
dead-time between triggers to less than
1 μs. Combine Sequence mode with
advanced triggers to isolate rare events
over time and analyze afterwards.
History Mode Waveform Playback
Scroll back in time using History Mode to view previous waveforms and isolate anomalies. Use cursors and measurement
parameters to quickly find the source of problems. History mode is always available with a single button press, no need to
enable this mode and never miss a waveform.
Go Back in Time to Identify the Source of a Problem
7
EMBEDDED CONTROLLER DESIGN AND DEBUG
Teledyne LeCroy’s versatile WaveSurfer 10 mixed signal oscilloscope combines the powerful
WaveSurfer 10 with the flexibility of digital inputs using the MS-250. In addition, the many
triggering and decoding options turn the WaveSurfer 10 into an all-in-one analog, digital, and serial
data trigger, acquisition, and debug machine.
High-performance Mixed
Signal Capabilities
Extensive Triggering
The WaveSurfer 10 has extensive digital
Quick Mixed Signal Setup,
Easy-to-use
Embedded controller design and debug
trigger capabilities. Normal oscilloscope
Unlike a traditional Logic Analyzer, the
involves capturing and viewing a
triggers will operate on digital inputs.
WaveSurfer 10 is easy to use. A simple
number of different types of signals.
Cross-pattern triggering allows for
connection links the oscilloscope with
These signals are typically a mix of
simple or complex trigger patterns to be
the digital inputs so users can start
analog, digital, and serial data wave-
setup with any combination of analog
viewing signals and begin debugging
forms from a combination of analog
and digital c
hannels. Event triggering
quickly. In addition, all standard
sensors, microcontrollers and peripheral
can be configured to arm on an analog
oscilloscope tools are readily
devices. With the ability to capture digital
signal and trigger on a digital pattern.
accessible. Signal debug is simple,
signals with speeds up to 250 MHz
using standard oscilloscope tools,
and long memory of 10 Mpts/Ch the
such as cursors, measurement
WaveSurfer 10 provides unmatched
parameters, and zooming.
mixed signal performance. The
WaveSurfer 10 is the ideal tool for testing embedded systems with 8-bit microcontrollers or slower digital signals.
With 18 digital inputs each with
250 MHz maximum input frequency
and 10 Mpts/Ch memory, the
WaveSurfer 10 is an outstanding value
and provides a complete set of tools for
embedded system testing.
8
SERIAL TRIGGER AND DECODE OPTIONS
Supported Serial Data
Protocols
• I2C, SPI, UART
• CAN, CAN FD, LIN, FlexRay™, SENT
• Ethernet 10/100BaseT,
USB 1.0/1.1/2.0, USB 2.0-HSIC
• Audio (I2S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
• Manchester, NRZ
View decoded protocol information on top of physical layer waveforms and trigger on protocol
specific messages.
Debugging serial data busses can be confusing and time consuming. The serial data and
decode options for WaveSurfer 10 provide time saving tools for serial bus debug and validation.
Powerful Serial Data Triggers
Table Summary and Search/Zoom
The serial data trigger will quickly
Intuitive, Color-Coded
Decode Overlay
isolate events on a bus eliminating
Protocol decoding is shown directly
all decoded data can be displayed in a
the need to set manual triggers and
on the waveform with an intuitive,
table below the waveform grid.
hoping to catch the right information.
color-coded overlay and presented in
Selecting an entry in the table with
Trigger conditions can be entered in
binary, hex or ASCII. Decoding on the
the touch screen will display just
binary or hexadecimal formats and
WaveSurfer 10 is fast even with long
that event. Additionally, built-in
conditional trigger capabilities even
memory and zooming in to the wave-
search functionality will find specific
allow triggering on a range of
form shows precise byte by
decoded values.
different events.
byte decoding.
To further simplify the debug process
9
SPECTRUM AND POWER ANALYZER
Simple Frequency Domain Analysis
Get better insight to the frequency
content of any signal with use of
the Spectrum Analyzer mode on the
WaveSurfer 10. This mode provides a
spectrum analyzer style user interface
with controls for start/stop frequency
or center frequency and span. The
unique peak search automatically
labels spectral components and presents frequency and level in an interactive table. Utilize up to 20 markers to
automatically identify harmonics and
monitor how the spectrum changes
over time using the spectrogram which
can display a 2D or 3D history of the
frequency content.
Power Analyzer Automates
Switching Device Loss
Measurements
button. Tools are provided to help re-
bilities provide insight to understand
duce sources of measurement errors
control loop response to critical events
Quickly measure and analyze the
and the measurement parameters pro-
such as a power supply’s soft start per-
vide details of single cycle or average
formance or step response to line and
device power losses.
load changes. The Line Power Analysis
Beyond the advanced power loss mea-
tool allows simple and quick pre-compli-
operating characteristics of power
conversion devices and circuits with
the Power Analyzer option. Critical
power switching device measurements,
control loop modulation analysis,
and line power harmonic testing are
all simplified with a dedicated user
interface and automatic measurements. Areas of turn-on, turn-off, and
conduction loss are all identified with
color-coded waveform overlays for
faster analysis.
Power Analyzer provides quick and
easy setup of voltage and current inputs and makes measurements
as simple as the push of a
10
surement capabilities, the Power
Analyzer modulation analysis capa-
ance testing to EN 61000-3-2.
WAVESURFER 10 SPECIFICATIONS
Analog - Vertical
Bandwidth (@ 50Ω)
Rise time
Input Channels
Resolution
Sensitivity
DC Gain Accuracy
BW Limit
Maximum Input Voltage
Input Coupling
Input Impedance
Analog - Acquisition
Sample Rate (Single-shot)
Sample Rate (Repetitive)
Record Length
Capture Time
Acquisition Modes
Timebase Range
Timebase Accuracy
Display System
1 GHz
350 ps
4
8 bits
2 mV/div–10 V/div (1 MΩ);
2 mV/div–1 V/div (50 Ω)
±1.0% of full scale (typical); ±1.5% of
full scale ≥ 10 mV/div (warranted)
20 MHz, 200 MHz
50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC +
Peak AC ≤10 kHz)
AC, DC, GND (DC and GND for 50 Ω)
1 MΩ || 16 pF, or 50 Ω
Display Size
Display Resolution
5 GS/s (10 GS/s Interleaved)
50 GS/s
10 Mpts/Ch (all channels),
20 Mpts (interleaved)
Up to 2.0 ms at full sample rate on all
four channels
Real Time, Roll, RIS (Random
Interleaved Sampling), WaveStream
(Fast Viewing Mode).
200 ps/div–1000 s/div
(Roll Mode available at ≥ 100 ms/div
and ≤ 5 MS/s)
≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @
5–40 °C)
Zooming
Digital - Vertical and Acquisition (with MS-250 Mixed Signal Option)
Input Channels
Input Impedance
Maximum Input Voltage
Threshold Groupings
Threshold Selections
Sample Rate
Record Length
Minimum Detectable Pulse
Width
Maximum Input Frequency
Trigger System
Modes
Sources
Coupling
Pre-trigger Delay
Post-trigger Delay
Hold-off
Internal Trigger Level Range
External Trigger Level Range
Trigger Types
Probes
Standard Probes
Probing System
18 (D0-D17)
100 kΩ || 5.0 pF
±30 V non-destruct
D0–D8, D9–D17
TTL, ECL, CMOS, PECL, LVDS,
User Defined
1 GS/s
10 Mpts/Ch
2 ns
250 MHz
Normal, Auto, Single, and Stop
Any input channel, External, Ext/10,
or line; slope and level unique to each
source (except for line trigger)
DC, AC, HFRej, LFRej
0-100% of full scale
0-10,000 Divisions
1 ns to 20 s or 1 to 1,000,000,000 events
±4.1 div from center
EXT/10 ±4V; EXT ±400 mV
Edge, Glitch, Width, Logic (Pattern),
TV (NTSC, PAL, SECAM, HDTV–720p,
1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout,
Qualified (State or Edge)
Measure, Zoom and Math Tools
Measurement Parameters
Math Functions
Up to 6 of the following parameters
can be calculated at one time on any
waveform: Amplitude, Area, Base
(Low), Delay,Parameters Duty, Fall
Time (90%–10%), Fall Time (80%–
20%), Frequency, Maximum, Mean,
Minimum, Overshoot+, Overshoot-,
Period, Peak-Peak, Phase, Rise Time
(10%–90%), Rise Time (20%–80%),
RMS, Skew, Standard Deviation, Top
(High), Width+, Width-. Measurements
can be gated.
Use front panel QuickZoom button, or
use touch screen or mouse to draw a
box around the zoom area.
Functions include Sum, Difference,
Product, Ratio, Derivative, Deskew,
Integral, Rescale (change scale and
units), Square, Square Root, Zoom and
FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann,
and FlatTop windows). 1 math function
may be defined at a time, 2 functions
may be chained together.
WaveSurfer 10M and Advanced Debug
Toolkit Additional Capabilities (Optional)
Sample Rate (SIngle-shot)
10 GS/s on all 4 channels
Record Length
Additional Acquisition Mode
16 Mpts/ch (32 Interleaved)
Sequence (Segmented Memory up to
5,000 segments with 1μs intersegment
time)
Absolute value, Average (summed
or continuous), Envelope, Enhanced
Resolution, Exp (base e), Exp (base
10), Floor, Invert, Log (base e), Log
(base 10), Reciprocal, Roof and Trend.
2 dual operator math functions may be
defined at a time.
Histicons for measurement
distribution analysis
History mode waveform playback
Additional Math Functions
Additional Measurement
Capabilities
Additional Debug Tools
Connectivity
Ethernet Port
USB Host Ports
GPIB Port (Optional)
External Monitor Port
Remote Control
Network Communication
Standard
Physical
One PP011 (5 mm)per channel
BNC and Teledyne LeCroy ProBus for
Active voltage, current and differential
probes
Color, 10.4” TFT-LCD Touch Screen
SVGA: 800 x 600 pixels
Dimensions (HWD)
Net Weight
10/100/1000Base-T Ethernet interface
(RJ-45 connector)
(5) USB Ports
Supports IEEE – 488.2 (Optional
External Adapter)
Standard 15-pin D-Type SVGAcompatible DB-15 connector
Via Windows Automation, or via
Teledyne LeCroy Remote Command
Set
VXI-11 or VICP, LXI Class C Compliant
260 mm x 340 mm x 152 mm
Excluding accessories and projections
(10.25” x 13.4” x 6”)
7.26 kg. (16.0 lbs.)
11
ORDERING INFORMATION
Product Description
Product Code
WaveSurfer 10 Oscilloscopes
Product Description
Product Code
Serial Data Options
1 GHz, 5 GS/s, 4 Ch, 10 Mpts/Ch DSO with 10.4” Touch
Screen Display. 10 GS/s, 20 Mpts Interleaved
1 GHz, 10 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4”
Touch Screen Display. 10 GS/s, 32 Mpts Interleaved
includes WS10-ADT option
WaveSurfer 10
WaveSurfer 10M
Included with Standard Configurations
÷10 Passive Probe (Total of 1 Per Channel), Protective Front Cover, Getting
Started Guide, Commercial NIST Traceable Calibration with Certificate,
Power Cable for the Destination Country, 3-year Warranty
General Accessories
Soft Carrying Case
Hard Carrying Case
Rack Mount Accessory
WS10-SOFTCASE
WS10-HARDCASE
WS10-RACK
Software Options
Advanced Debug Toolkit Option
Power Analyzer Option
Spectrum Analyzer Option
WS10-ADT
WS10-PWR
WS10-SPECTRUM
Local Language Overlays
German Front Panel Overlay
French Front Panel Overlay
Italian Front Panel Overlay
Spanish Front Panel Overlay
Japanese Front Panel Overlay
Korean Front Panel Overlay
Chinese (Tr) Front Panel Overlay
Chinese (Simp) Front Panel Overlay
Russian Front Panel Overlay
WS10-FP-GERMAN
WS10-FP-FRENCH
WS10-FP-ITALIAN
WS10-FP-SPANISH
WS10-FP-JAPANESE
WS10-FP-KOREAN
WS10-FP-CHNES-TR
WS10-FP-CHNES-SI
WS10-FP-RUSSIAN
Mixed Signal Solutions
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch
Mixed Signal Oscilloscope Option
250 MHz,36 Ch,1 GS/s, 25 Mpts/ch
(500 MHz,18 Ch,2 GS/s, 50 Mpts/ch Interleaved)
Mixed Signal Option
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch
Mixed Signal Oscilloscope Option
MS-500
MS-500-36
MS-250
Mixed Signal Accessories
Extra Large Gripper Probe Set, Includes 22 probes
Large Gripper Probe Set for 0.10 Inch (2.54 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
Medium Gripper Probe Set for 0.04 Inch (1.0 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
Small Gripper Probe Set for 0.008 Inch (0.2 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
18-pin 3M Interface Cable MSO-3M
(Mates with 3M Part Number 2520-6002)
36 Channel Mictor Connector
(Includes 1 MSO-MICTOR-SHROUD)
PK400-0
PK400-1
PK400-2
PK400-3
MSO-3M
MSO-Mictor
ARINC 429 Symbolic Decode Option
WS10-ARINC429bus DSymbolic
Audiobus Trigger and Decode Option
WS10-Audiobus TD
for I2S, LJ, RJ, and TDM
CAN Trigger and Decode Option
WS10-CANbus TD
CAN FD Trigger and Decode Option
WS10-CAN FDbus TD
D-PHY Decode Option
WS10-DPHYbus D
DigRF 3G Decode Option
WS10-DigRF3Gbus D
DigRF v4 Decode Option
WS10-DigRFv4bus D
ENET Decode Option
WS10-ENETbus D
FlexRay Trigger and Decode Option
WS10-FlexRaybus TD
I2C, SPI and UART Trigger and Decode Option
WS10-EMB
I2C Bus Trigger and Decode Option
WS10-I2Cbus TD
LIN Trigger and Decode Option
WS10-LINbus TD
Manchester Decode Option
WS10-Manchesterbus D
MIL-STD-1553 Trigger and Decode Option
WS10-1553 TD
NRZ Decode Option
WS10-NRZbus D
SENT Decode Option
WS10-SENTbus D
SPI Bus Trigger and Decode Option
WS10-SPIbus TD
UART and RS-232 Trigger and Decode Option
WS10-UART-RS232bus TD
USB 2.0 Decode Option
WS10-USB2bus D
USB2-HSIC Decode Option
WS10-USB2-HSICbus D
Probes
500 MHz Passive Probe 10:1, 10 MΩ
PP011
700 V, 15 MHz High-Voltage Differential Probe
AP031
200 MHz, 3.5 pF, 1 MΩ Active Differential Probe
ZD200
1 GHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD1000
Deskew Calibration Source for CP031 and CP030
DCS015
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP030
30 A; 50 MHz High Sensitivity Current Probe – AC/DC; 30 Arms;
CP030A
50 Apeak Pulse
30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP031
30 A; 100 MHz High Sensitivity Current Probe – AC/DC; 30 Arms;
CP031A
50 Apeak Pulse
150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse
CP150
500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse
CP500
1,400 V, 100 MHz High-Voltage Differential Probe
ADP305
1,400 V, 20 MHz High-Voltage Differential Probe
ADP300
1 Ch, 100 MHz Differential Amplifier
DA1855A
with Precision Voltage Source
1.5 GHz, 0.9 pF, 1 MΩ High Impedance Active Probe
ZS1500
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ
ZS1500-QUADPAK
High Impedance Active Probe
1 GHz, 0.9 pF, 1 MΩ High Impedance Active Probe
ZS1000
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ
ZS1000-QUADPAK
High Impedance Active Probe
25 MHz High Voltage Differential Probe
HVD3102
80 MHz High Voltage Differential Probe with 6m cable
HVD3106-6M
120 MHz High Voltage Differential Probe
HVD3106
Customer Service
Teledyne LeCroy oscilloscopes and probes are designed, built, and tested
to ensure high reliability. In the unlikely event you experience difficulties,
our digital oscilloscopes are fully warranted for three years and our
probes are warranted for one year. This warranty includes:
No charge for return shipping
Long-term 7-year support
Upgrade to latest software at no charge
•
•
1-800-5-LeCroy
teledynelecroy.com
•
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2015 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
wavesurfer10-ds-30apr15