50-00468

Materials 1. Shell, brass, nickel plated 2. Pins 5 - 9, brass, 5 μ" gold and tin plating 3. Pins 1 - 4, phosphor bronze, 5 μ" gold and tin plating 4. Insulator, PBT, blue USB A 3.0 jack molding style Pin 9 Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life, unloaded; less than 100 mΩ contact resistance, minimum 100 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction without damage or looseness A1 12/15/2015 07/27/2018 Description: 4 tin plating GL Verified: RS 4 1 1 2 3 4 4 Pin 4 Pin 9 Pin 5 5 6 7 8 9 1.8 Notes: Digitally signed by GL Date: 2018.08.06 09:18:05 -07'00' RoHS and REACH compliant Digitally signed by RS Date: 2018.08.09 09:07:44 -07'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 gold plating Pin 4 Pin 1 Prepared: Initial release Corrected operating temp range 3 1 15 ±0.20 3.6 ±0.20 Operating range -40 ~ 85 °C A 2 14.4 ±0.20 6 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation Date: 11 Pin 1 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Revision: Pin 5 7 ±0.20 5.7 ±0.20 Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 500 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less 13.1 ±0.20 tel fax Description: Connector, USB A 3.0 Jack, molding style, nickel shell, dual row terminals, blue insulator, tray 3 Size: Part number: A 50-00468 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com Sheet 1 of 1 2:1 1