50-00543

3 4 1 2 8 ±0.05 1.6 Mechanical Requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.3-3 kgf Life cycle: 5000 mating cycles while maintaining 0.3-2.0 kgf min. insertion force, 0.2-1.5 kgf min. withdrawal force and less than 100 mΩ contact resistance. 2.15 +0.20 5.65 0 Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less 0 2.5 -0.10 Materials 1. Insulator: Nylon UL94-V, black 2. Pin: C3604 brass, 1 μm nickel plated minimum 3. Shell: C3604 brass, 1 μm nickel plated minimum 4. Terminal: C5191 phosphor bronze, 1 μm nickel plated minimum Environmental Requirements Heat test: 70 °C, relative humidity 70-85% for 96 hours while maintaining contact resistance: 100 mΩ maximum, insulation resistance: 50 MΩ @500 Vac, without looseness or deformation Humidity test: 40 °C, relative humidity 90-100% for 96 hours while maintaining dielectric strength: 1 min. @ 500 Vac, insulation resistance: 50 MΩ @ 500 Vdc, contact resistance: 100 mΩ maximum Salt spray test: 35 ±2 °C, relative humidity 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ. 1.3 ±0.30 1 11.5 ±1 SECTION A-A 3 1. 5 A A 17.6 ±0.50 Revision: A A1 Date: 09/28/2016 01/18/2019 Description: Prepared: GL Initial release Updated temperature rise data Verified: AW Notes: Digitally signed by GL Date: 2019.01.18 09:20:51 -08'00' RoHS compliant Digitally signed by AW Date: 2019.01.18 10:00:50 -08'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: 0.3 mm X: X.X: 0.1 mm X.XX: 0.05 mm 5 4 tel fax Description: Connector, dc jack, 5.5x2.5x17.6 mm, molding style, spring contacts, nickel plated, 105° C 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 50-00543 Scale: 800 web 877.670.7118 tensility.com Sheet 1 of 2 3:1 1 Ratings Maximum Operating Voltage: 48 Vdc Maximum Operating Current: 6.0 A Operating Temperature Range -25° to 105 °C, relative humidity of 85% or less Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: A A1 Date: 09/28/2016 01/18/2019 Description: Prepared: GL Initial release Updated temperature rise data Verified: AW Notes: Digitally signed by GL Date: 2019.01.18 09:21:14 -08'00' RoHS compliant Digitally signed by AW Date: 2019.01.18 10:01:04 -08'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 4 tel fax Description: Connector, dc jack, 5.5x2.5x17.6 mm, molding style, spring contacts, nickel plated, 105° C 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 50-00543 Scale: 800 web 877.670.7118 tensility.com 3:1 Sheet 2 of 2 1