54-00015

2 3 6.9 ±0.20 5.8 ±0.20 1 4 3.1 6.2 ±0.20 13.2 ±0.20 0.6 2 7 9.8 2.5 0.2 Revision: A A1 Date: 09/28/2015 07/30/2018 Description: Prepared: GL Initial release Verified: Corrected operating temp range RS 4 7 2 12.9 1.5 3 1. 7 1.0x0.6 (x4) ) (x2 PCB Layout Notes: Digitally signed by GL Date: 2018.08.06 10:00:16 -07'00' Digitally signed by RS Date: 2018.08.09 10:27:57 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 2 4 0.3 9.65 9.8 ±0.20 0.3 2.5 1 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A Jack, PCB mount, 90°, nickel shell, ground terminals, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00015 Scale: 800 web 877.670.7118 tensility.com 3:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB A jack 90° PCB mount 14.5 ±0.20 Materials 1. Shell, brass, nickel plated 2. Pins, brass, 5 μ" gold and tin plating 3. Insulator, PBT, black USB A jack 90° PCB mount Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 500 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less 3 Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life; less than 100 mΩ contact resistance, minimum 100 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction without damage or looseness 1 9.8 2 2.5 Gold 1 A1 09/28/2015 07/30/2018 3 4 Pin plating detail 1. 7 A 2 Tin Operating range -40 ~ 85 °C Date: 2 12.9 Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation Revision: 0.2 7 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Description: Prepared: GL Initial release Corrected operating temp range Verified: RS 4 PCB Layout Notes: Digitally signed by GL Date: 2018.08.06 10:00:37 -07'00' RoHS and REACH compliant Digitally signed by RS Date: 2018.08.09 10:27:43 -07'00' Function test: no open, no short circuit, no intermittent Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 1.0x0.6 (x4) ) (x2 tel fax Description: Connector, USB A Jack, PCB mount, 90°, nickel shell, ground terminals, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00015 Scale: 800 web 877.670.7118 tensility.com Sheet 2 of 2 3:1 1