162CNQ030

Bulletin PD-2.366 05/00 162CNQ030 SCHOTTKY RECTIFIER 160 Amp Characteristics 162CNQ... Units IF(AV) Rectangular waveform 160 A VRRM range 30 V IFSM @ tp = 5 µs sine 7900 A VF 0.46 V - 55 to 150 °C @ 80 Apk, TJ = 125°C (per leg) TJ range TO-249AA Description/Features Major Ratings and Characteristics The 162CNQ030 non isolated, center tap Schottky rectifier module series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Isolated heatsink Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package (NON ISOLATED BASE) Outline TO-249AA Dimensions in millimeters and (inches) www.irf.com 1 162CNQ030 Bulletin PD-2.366 05/00 Voltage Ratings Part number VR 162CNQ030 Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 162CNQ Units Conditions (Per Leg) (PerDevice) 80 160 A 50% duty cycle @ T C = 109 °C, rectangular wave form Max. Peak One Cycle Non-Repetitive 7900 A 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 980 EAS Non-Repetitive Avalanche Energy (Per Leg) 72 mJ IAR RepetitiveAvalancheCurrent (Per Leg) 16 A Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 °C, IAS = 16 Amps, L = 0.84 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM 162CNQ Units Conditions Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 0.53 0.65 V V @ 80A @ 160A TJ = 25 °C TJ = 125 °C 0.46 V @ 80A 0.63 V @ 160A IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) 5 280 mA mA TJ = 25 °C TJ = 125 °C CT Max. Junction Capacitance (Per Leg) 3700 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured from terminal hole to terminal hole 10,000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) VR = rated VR (1) Pulse Width < 300µs, Duty Cycle