60EPS12

60EPS.. High Voltage Series Vishay High Power Products Input Rectifier Diode, 60 A Base common cathode 2 TO-247AC modified 1 Anode 1 3 Anode 2 DESCRIPTION/FEATURES The 60EPS.. rectifier High Voltage Series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150 °C junction temperature. Typical applications are in input rectification and these products are designed to be used with Vishay HPP switches and output rectifiers which are available in identical package outlines. This product has been designed and qualified for industrial level. PRODUCT SUMMARY VF at 60 A 1.09 V IFSM 950 A VRRM 800/1200 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 60 A 800/1200 V Sinusoidal waveform VRRM IFSM 950 A 1.09 V - 40 to 150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA 60EPS08 800 900 60EPS12 1200 1300 VF 60 A, TJ = 25 °C TJ VOLTAGE RATINGS PART NUMBER 1 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) Maximum peak one cycle non-repetitive surge current IFSM Maximum I2t for fusing I2t Maximum I2√t for fusing I2√t Document Number: 93518 Revision: 25-Aug-08 TEST CONDITIONS TC = 118 °C, 180° conduction half sine wave VALUES 10 ms sine pulse, rated VRRM applied 950 10 ms sine pulse, no voltage reapplied 1100 10 ms sine pulse, rated VRRM applied 4512 10 ms sine pulse, no voltage reapplied 6300 t = 0.1 to 10 ms, no voltage reapplied 63 000 For technical questions, contact: diodes-tech@vishay.com UNITS 60 A A2 s A2√s www.vishay.com 1 60EPS.. High Voltage Series Vishay High Power Products Input Rectifier Diode, 60 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM Forward slope resistance rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS VALUES UNITS 30 A, TJ = 25 °C 1.0 V 60 A, TJ = 25 °C 1.09 V 3.96 mΩ 0.74 V TJ = 150 °C TJ = 25 °C TJ = 150 °C VR = Rated VRRM 0.1 mA 1.0 THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, unction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS TEST CONDITIONS DC operation Marking device www.vishay.com 2 UNITS - 40 to 150 °C 0.35 40 Mounting surface, smooth and greased °C/W 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Approximate weight Mounting torque VALUES Case style TO-247AC modified (JEDEC) For technical questions, contact: diodes-tech@vishay.com 60EPS08 60EPS12 Document Number: 93518 Revision: 25-Aug-08 60EPS.. High Voltage Series Input Rectifier Diode, 60 A 110 60EPS.. Series RthJC (DC) = 0.35 K/W Maximum Average Forward Powerl Loss (W) Maximum Allowable case Temperature (°C) 150 140 Ø Conduction angle 130 120 90° 110 60° 120° 30° 180° 100 DC 180° 120° 90° 60° 30° 100 90 80 70 RMS limit 60 50 Ø 40 Conduction period 30 20 60EPS.. Series TJ = 150 °C 10 0 0 10 20 30 40 50 60 70 0 40 60 80 100 Average Forward Current (A) Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 1000 60EPS.. Series RthJC (DC) = 0.35 K/W Peak Half Sine Wave Forward Current (A) Ø Conduction period 30° 60° 90° 120° 120 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 900 140 130 20 Fig. 1 - Current Rating Characteristics 150 Maximum Allowable Case Temperature (°C) Vishay High Power Products 180° 800 700 600 500 60EPS.. Series 400 DC 300 110 0 20 40 80 60 1 100 Fig. 2 - Current Rating Characteristics 80 70 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) 1200 180° 120° 90° 60° 30° RMS limit 60 50 40 Ø Conduction angle 30 60EPS.. Series TJ = 150 °C 20 10 10 20 30 40 50 60 70 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Document Number: 93518 Revision: 25-Aug-08 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 1000 800 600 400 60EPS.. Series 0 0 100 Number of Equal Amplitude Half Cycle Current Pulse (N) Fig. 5 - Maximum Non-Repetitive Surge Current Average Forward Current (A) 90 10 200 0.01 0.1 1.0 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 60EPS.. High Voltage Series Vishay High Power Products Input Rectifier Diode, 60 A Instanteous Forward Current (A) 1000 100 TJ = 25 °C TJ = 150 °C 10 60EPS.. Series 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 1 ZthJC - Transient Thermal Impedance (°C/W) Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 0.01 0.0001 0.001 0.01 60EPS.. Series 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93518 Revision: 25-Aug-08 60EPS.. High Voltage Series Input Rectifier Diode, 60 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 60 E P S 12 - 1 2 3 4 5 6 1 - Current rating (60 = 60 A) 2 - Circuit configuration: E = Single diode 3 - 4 - Package: P = TO-247AC modified Type of silicon: S = Standard recovery rectifier 5 - 6 - Voltage code x 100 = VRRM None = Standard production 08 = 800 V 12 = 1200 V PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95253 Part marking information http://www.vishay.com/doc?95255 Document Number: 93518 Revision: 25-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1