630D227M016DF5A

630D www.vishay.com Vishay Sprague Aluminum Capacitors +125 °C, Miniature, Axial Lead FEATURES • Extended temperature range • Economical Available • Low DCL option • For timing circuit applications • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS VALUE Nominal case size  Ø D x L in mm TEMPERATURE 0.248" x 0.689" [6.3 x 17.5] to 0.492" x 1.752" [12.5 x 44.5] Operating temperature -55 °C to +125 °C Rated capacitance range, CR 6.8 μF to 3900 μF Tolerance on CR ± 20 % Rated voltage range, UR AMBIENT TEMPERATURE MULTIPLIERS +105 °C 0.5 +85 °C 1.0 +65 °C 2.0 +55 °C or less 2.5 3 WVDC to 63 WVDC Termination FREQUENCY (Hz) Axial leaded Life validation test at 125 °C 500 h for case size BB to CB 1000 h for case size CC to DF 2000 h for case size DH to FK CAP  20 % from initial measurement. ESR  1.5 x initial specified limit. DCL  initial specified limit. WVDC 50 TO 60 3 to 63 0.90 100 TO 120 300 TO 400 1.00 1.10 > 1000 1.35 CAP  20 % from initial measurement. ESR  1.5 x initial specified limit. DCL  3 x the initial specified limit. Shelf life  500 h at 85 °C I = 0.004 CV + 3 (3 VDC to 63 VDC) I in μA, C in μF, V in Volts DC leakage current DIMENSIONS in inches [millimeters] NOMINAL STYLE 2 STYLE 5 CASE CODE D L D (max.) L (max.) D (max.) L (max.) BB 0.248 [6.3] 0.689 [17.5] 0.276 [7.0] 0.756 [19.2] 0.276 [7.0] 0.815 [20.7] CB 0.315 [8.0] 0.689 [17.5] 0.339 [8.6] 0.756 [19.2] 0.339 [8.6] 0.815 [20.7] CC 0.315 [8.0] 0.807 [20.5] 0.339 [8.6] 0.878 [22.3] 0.339 [8.6] 0.937 [23.8] DC 0.374 [9.5] 0.807 [20.5] 0.402 [10.2] 0.878 [22.3] 0.402 [10.2] 0.937 [23.8] DD 0.374 [9.5] 0.945 [24.0] 0.402 [10.2] 1.004 [25.5] 0.402 [10.2] 1.063 [27.0] DF 0.374 [9.5] 1.260 [32.0] 0.402 [10.2] 1.319 [33.5] 0.402 [10.2] 1.378 [35.0] DH 0.374 [9.5] 1.496 [38.0] 0.402 [10.2] 1.567 [39.8] 0.402 [10.2] 1.626 [41.3] EF 0.433 [11.0] 1.260 [32.0] 0.465 [11.8] 1.319 [33.5] 0.465 [11.8] 1.378 [35.0] EH 0.433 [11.0] 1.496 [38.0] 0.465 [11.8] 1.567 [39.8] 0.465 [11.8] 1.63 [41.3] FH 0.492 [12.5] 1.496 [38.0] 0.516 [13.1] 1.567 [39.8] 0.516 [13.1] 1.63 [41.3] FK 0.492 [12.5] 1.752 [44.5] 0.516 [13.1] 1.83 [46.5] 0.516 [13.1] 1.89 [48.0] Revision: 20-Jul-16 Document Number: 42044 1 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 630D www.vishay.com Vishay Sprague DIMENSIONS AND AVAILABLE FORMS Case Style 2 Case Style 5 L 31.75 31.75 ØD 31.75 L 31.75 ØD Epoxy end seal Lead diameter No. 20 AWG (0.032" [0.813 mm] Dia.) PART NUMBER INFORMATION 630D 826 M 003 BB 2 A TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING CASE CODE CASE STYLE PACKAGING Identifies the series name. Expressed in pF. The first two digits are significant figures. The third is the number of zeros. M = -20 % / +20 % A = -10 % / +10 % Expressed in volts. The letter “R” signifies a decimal point (i.e. 6R3 = 6.3 V). See table Dimensions. 2 = polyester insulating sleeve (Std.) 5 = polyester insulating sleeve with resin end seal (required for exposure to halogenated cleaning solvents) A = bulk pack (Std.) T = tape and reel (Not available in G and L diameters) Note • For lead (Pb)-free / RoHS compliant products add suffix “E3” to part number. Example: 630D157M030DF2AE3                                   Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 20-Jul-16 Document Number: 42044 2 For technical questions, contact: aluminumcaps4@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000