BAS385-TR3

BAS385 www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • Integrated discharge protection ring against static • Very low forward voltage • AEC-Q101 qualified DESIGN SUPPORT TOOLS click logo to get started • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Applications where a very low forward voltage is required Models Available MECHANICAL DATA Case: MicroMELF Weight: approx. 12 mg Cathode band color: black Packaging codes/options: TR3/10K per 13" reel (8 mm tape), 10K/box TR/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE CIRCUIT CONFIGURATION REMARKS VR = 30 V BAS385-TR3 or BAS385-TR Single Tape and reel BAS385 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE VR 30 V tp = 10 ms IFSM 5 A tp ≤ 1 s IFRM 300 mA IF 200 mA IFAV 200 mA Reverse voltage Peak forward surge current Repetitive peak forward current Forward continuous current Average forward current VRWM = 25 V UNIT THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Junction to ambient air TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 320 K/W Junction temperature Storage temperature range Tj 125 °C Tstg -65 to +150 °C ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Forward voltage Reserve current Diode capacitance TEST CONDITION SYMBOL MAX. UNIT IF = 0.1mA VF MIN. TYP. 240 mV IF = 1 mA VF 320 mV IF = 10 mA VF 400 mV IF = 30 mA VF 500 mV IF = 100 mA VF 800 mV VR = 25 V, tp = 300 μs IR 2.3 μA VR = 1 V, f = 1 MHz CD 10 pF Rev. 2.2, 02-Jun-17 Document Number: 85504 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS385 www.vishay.com Vishay Semiconductors 10 200 VR = 30 V 180 160 140 RthJA = 540 kW 120 PR - Limit at 100 % VR 100 80 PR - Limit at 80 % VR 60 40 f = 1 MHz 9 CD - Diode Capacitance (pF) PR - Reverse Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 8 7 6 5 4 3 2 1 20 0 0 25 50 75 100 125 1 10 100 VR - Reverse Voltage (V) 15825 Tj - Junction Temperature (°C) 15822 0.1 150 Fig. 4 - Diode Capacitance vs. Reverse Voltage Fig. 1 - Max. Reverse Power Dissipation vs. Junction Temperature 1000 1.3 1.27 0.152 9.9 100 25 0.355 10 10 IR - Reverse Current (µA) 0.71 VR = VRRM 2.5 1 25 50 75 100 125 150 95 10329 24 Tj - Junction Temperature (°C) 15823 Fig. 2 - Reverse Current vs. Junction Temperature Fig. 5 - Board for RthJA Definition (in mm) IF - Forward Current (mA) 1000 Tj = 125 °C 100 Tj = 25 °C 10 1 0.1 0 15824 0.5 1.0 1.5 VF - Forward Voltage (V) Fig. 3 - Forward Current vs. Forward Voltage Rev. 2.2, 02-Jun-17 Document Number: 85504 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS385 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MicroMELF 1. 35 ( as 0.0 s 53 ) 0.6 (0.024) 1.1 (0.043) 1.2 (0.047) * gl surface plan < 1 (0.039) surface plan Cathode indification 0.25 (0.010) 0.15 (0.006) > R2.5 (0.098) glass 2 (0.079) 1.8 (0.071) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: Wave soldering 2.4 (0.094) 2.8 (0.110) 0.8 (0.031) 0.9 (0.035) 0.9 (0.035) 1.4 (0.055) 1.2 (0.047) 0.8 (0.031) Reflow soldering 0.8 (0.031) 1 (0.039) Created - Date: 26.July.1996 Rev. 13 - Date: 07.June.2006 Document no.:6.560-5007.01-4 96 12072 Rev. 2.2, 02-Jun-17 Document Number: 85504 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000