DG2749DN-T1-E4

DG2747, DG2748, DG2749 Vishay Siliconix 0.4-Ω, Low Voltage, Dual SPST Analog Switch DESCRIPTION FEATURES The DG2747, DG2748, and DG2749 are high performance, low on-resistance analog switches of dual SPST configuration. Built on Vishay Siliconix's sub-micro CMOS technology, the DG2747, DG2748, DG2749 achieve switch on-resistance of 0.4 Ω at 2.7 V V+ and 0.3 Ω at 4.3 V V+. It provides 0.1 Ω flatness at 2.7 V V+, and total harmonic distortion to 0.03 % (frequency range 20 Hz to 20 kHz). It achieves - 72 dB off-isolation and - 100 dB crosstalk at 100 kHz. Its - 3 dB bandwidth is up to 93 MHz. It can switch signals with amplitudes of up to VCC to be transmitted in either direction. The select pins of the control logic can tolerate voltages above V+. Logic high is 1.4 V to make it compatible with many low voltage digital control circuits. Combining wide operation voltage, low power, high speed, low on-resistance and small physical size, the DG2747, DG2748, DG2749 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG2747, DG2748, DG2749 come in a small miniQFN-8 lead package (1.4 x 1.4 x 0.55 mm). As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with the lead (Pb)-free device terminations and is 100 % RoHS compliant. • Wide operation voltage range: 1.6 V to 4.3 V • Low on-resistance: 0.4 Ω typ. at 2.7 V • Low voltage logic threshold: Vth(high) = 1.4 V at V+ = 3 V • - 100 dB crosstalk at 100 kHz • > 250 mA latch up current per JESD78 • Switch exceeds 7 kV ESD/HBM RoHS COMPLIANT BENEFITS • • • • Ultra small miniQFN8 package of 1.4 x 1.4 x 0.55 mm High fidelity audio switch Reed relay replacement Low power consumption APPLICATIONS • • • • • Cellular phones Portable media player GPS PCMCIA cards Medical and test equipment FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2747 miniQFN-8L DG2748 miniQFN-8L V+ V+ (Top View) 8 IN1 1 7 (Top View) 8 IN2 IN1 1 7 IN2 COM1 2 6 COM2 NC1 3 Dx COM1 NO1 2 3 6 COM2 5 NO2 Ex Pin 1 Device Marking: Dx for DG2747 x = Date/Lot Traceability Code Pin 1 4 5 4 GND GND Top View Top View NC2 Device Marking: Ex for DG2748 x = Date/Lot Traceability Code DG2749 miniQFN-8L V+ 8 (Top View) IN1 1 7 IN2 COM1 2 6 COM2 NC1 3 5 NC2 Fx Pin 1 4 Device Marking: Fx for DG2749 x = Date/Lot Traceability Code GND Top View Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 www.vishay.com 1 DG2747, DG2748, DG2749 Vishay Siliconix TRUTH TABLE DG2747 Logic DG2748 DG2749 COM1 and NO1 COM2 and NO2 COM1 and NC1 COM2 and NC2 COM1 and NC1 COM2 and NO2 Low OFF OFF ON ON ON OFF High ON ON OFF OFF OFF ON ORDERING INFORMATION Temp. Range Package Part Number - 40 °C to 85°C miniQFN-8L DG2747DN-T1-E4 DG2748DN-T1-E4 DG2749DN-T1-E4 ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Reference to GND V+ IN, COM, NC, NOa Limit - 0.3 to 5.0 - 0.3 to (V+ + 0.3) 30 ± 300 ± 500 - 65 to 150 190 Unit V Current (Any terminal except NO, NC or COM) Continuous Current (NO, NC, or COM) mA Peak Current (Pulsed at 1 ms, 10 % duty cycle) Storage Temperature (D Suffix) °C Power Dissipation (Packages)b miniQFN-8Lc mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.4 mW/°C above 70 °C. www.vishay.com 2 Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 DG2747, DG2748, DG2749 Vishay Siliconix SPECIFICATIONS V+ = 3 V Parameter Symbol Limits - 40 °C to 85 °C Test Conditions Unless Otherwise Specified V+ = 3 V, ± 10 %,VIN = 0.4 V or 1.4 Ve Temp.a Min.b RDS(on) Full 0 Typ.c Max.b Unit V+ V Analog Switch Analog Signal Ranged Vanalog V+ = 2.7 V, INO/NC = 100 mA, VCOM = 0.5 V On-Resistance RDS(on) V+ = 2.7 V, INO/NC = 100 mA, VCOM = 1.5 V V+ = 2.7 V, INO/NC = 100 mA, VCOM = 0.5 V V+ = 2.7 V, INO/NC = 100 mA, VCOM = 1.5 V RON Matchd RON Resistance Flatnessd Channel-On Leakage Current 0.03 Ω Room RON flatness V+ = 2.7 V, INO/NC = 100 mA, VCOM = 0.5 V, 1.5 V Room ICOM(off) ICOM(on) V+ = 4.3 V, VNO/NC = VCOM = 3.3 V/1.0 V 0.6 0.7 V+ = 2.7 V, INO/NC = 100 mA, VCOM = 0.5 V, 1.5 V V+ = 4.3 V, VNO/NC = 1.0 V/3.3 V, VCOM = 3.3 V/1.0 V 0.4 Full ΔRON INO/NC(off) Switch Off Leakage Current Room 0.1 0.2 Room -2 2 Full - 10 10 Room -2 2 Full - 10 10 Room Full -2 2 - 10 10 1.4 nA Digital Control Input High Voltage VINH Full Input Low Voltage VINL Full IINL or IINH Input Current VIN = 0 or V+ Full V 0.4 -1 1 µA Dynamic Characteristics Turn-On Timee tON Turn-Off Timee tOFF Charge Injectiond Off-Isolationd Crosstalkd Q CL = 1 nF, RGEN = 0 Ω, VGEN = 0 V Room OIRR RL = 50 Ω, CL = 5 pF, f = 100 kHz 3 dB bandwidthd CNX(off) 14 Full Room XTALK Source Off Capacitanced Room V+ = 2.7 V to 3.6 V, VNO or VNC = 1.5 V, RL = 50 Ω, CL = 35 pF 12 Full pC - 52 - 72 Room dB - 90 RL = 50 Ω, CL = 5 pF, f = 100 kHz - 100 RL = 50 Ω, CL = 5 pF Room 93 f = 1 MHz, VNX = 0 V Room 75 CCOM(off) f = 1 MHz, VCOM = 0 V Room 55 d CCOM(on) f = 1 MHz, VCOM = VNX = 0 V Room 100 THD V+ = 2.7 V to 3.6 V, VIN = 0.5 Vp-p f = 20 Hz to 20 kHz Room 0.03 VIN = 0 or V+ Full Total Harmonic Distortiond ns 27 Drain Off Capacitanced Drain On Capacitance 25 10 RL = 50 Ω, CL = 5 pF, f = 1 MHz RL = 50 Ω, CL = 5 pF, f = 1 MHz 25 27 MHz pF % Power Supply Power Supply Range V+ Power Supply Current I+ 1.6 4.3 V 1.0 µA Notes: a. Room = 25 °C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. VIN = input voltage to perform proper function. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 www.vishay.com 3 DG2747, DG2748, DG2749 Vishay Siliconix TYPICAL CHARACTERISTICS TA = 25 °C, unless otherwise noted 1.4 0.6 0.5 RDS(on) - On-Resistance (Ω) R DS(on) - On-Resistance (Ω) V+ = 2.7 V + 85 °C TA = 25 °C V+ = 1.6 V 1.2 1.0 V+ = 2.7 V 0.8 V+ = 3.6 V V+ = 3 V 0.6 V+ = 4.3 V 0.4 0.4 0.3 + 25 °C - 40 °C 0.2 0.1 0.2 0 0 0 1 2 3 4 5 0 0.5 VCOM (VD) - Analog Voltage (V) 1 1.5 2 3 VCOM (VD) - Analog Voltage (V) RDS(ON) vs. VD and Supply Voltage RDS(ON) vs. VD and Temperature 10000 100 V+ = 4.3 V ICOM(off) 10 Leakage Current (pA) I+ - Supply Current (nA) 2.5 1.0 1000 INO(off) 100 10 0.1 V+ = 4.3 V ICOM(on) 0 - 40 - 20 0 20 40 60 80 1 - 40 100 0 20 40 60 80 Temperature (°C) Supply Current vs. Temperature Leakage Current vs. Temperature 100 18 1500 1000 I COM(on) 14 500 0 - 500 I COM(off) - 1000 C L = 1 nF Drain 16 I NO(off) Q - Charge Injection (pC) Leakage Current (pA) - 20 Temperature (°C) - 1500 12 10 8 6 4 V+ = 4.3 V - 2000 V+ = 3 V V+ = 3.6 V V+ = 2.7 V 2 - 2500 0 0 www.vishay.com 4 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 0.5 1 1.5 2 2.5 3 3.5 VCOM - Analog Voltage (V) Analog Voltage (V) Leakage vs. Analog Voltage Charge Injection vs. Analog Voltage 4 Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 DG2747, DG2748, DG2749 Vishay Siliconix TYPICAL CHARACTERISTICS TA = 25 °C, unless otherwise noted 18 1 16 -1 t OFF V+ = 3.6 V -2 14 -3 t ON V+ = 2.7 V 12 LOSS (dB) tON, t OFF - Switching Time (ns) 0 t OFF V+ = 2.7 V -4 -5 -6 10 -7 t ON V+ = 3.6 V V+ = 3 V R L = 50 Ω -8 8 -9 6 - 40 - 20 0 20 40 60 - 10 100k 80 1G Frequency (Hz) Insertion Loss vs. Frequency 10 0 - 40 °C to 85 °C - 10 Loss, OIRR, X TALK (dB) VT - Switching Threshold (V) 100M Temperature (°C) 1.4 1.2 1.1 1.0 0.9 0.8 0.7 - 20 - 30 O IRR - 40 - 50 XTALK - 60 - 70 - 80 V+ = 3 V R L = 50 Ω - 90 0.6 0.5 1.5 10M Switching Time vs. Temperature 1.5 1.3 1M - 100 2.0 2.5 3.0 3.5 4.0 V+ - Supply Voltage (V) Switching Threshold vs. Supply Voltage Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 4.5 - 110 100k 1M 10M 100M 1G Frequency (Hz) Off-Isolation and Crosstalk vs. Frequency www.vishay.com 5 DG2747, DG2748, DG2749 Vishay Siliconix TEST CIRCUITS V+ Logic Input V+ COM NO or NC Switch Input VINH tr < 5 ns tf < 5 ns 50 % VINL Switch Output VOUT 0.9 x V OUT Logic Input Switch Output IN RL 50 Ω GND CL 35 pF 0V tON tOFF 0V Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. CL (includes fixture and stray capacitance) VOUT = VCOM (R L RL + R ON ) Figure 1. Switching Time V+ VINH Logic Input VNO2 V+ COM2 NO2 VO2 IN2 VNC1 Switch Output IN1 RL2 50 Ω GND 90 % VO1 COM1 NC 1 50 % VINL VNO2 VO2 RL1 50 Ω CL2 35 pF CL1 35 pF 0V VNC1 VO1 0V Switch Output 90 % tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make (DG2749) ΔVO V+ Rg Vg VIN = 0 - V+ VO INX V+ NC or NO IN OFF COM ON OFF VO CL 1 nF GND INX OFF ON Q = ΔVO x CL OFF Figure 3. Charge Injection www.vishay.com 6 Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 DG2747, DG2748, DG2749 Vishay Siliconix TEST CIRCUITS V+ V+ NC or NO 0 V, V+ IN COM RL Analyzer GND VCOM Off Isolation = 20 log V NO / NC Figure 4. Off-Isolation V+ C NO1 or NC1 VS Rg = 50 Ω V+ COM1 50 Ω IN1 0 V, V+ NO2 or NC2 0 V, V+ COM 2 VO RL IN2 GND XTALK Isolation = 20 log VO VS C = RF bypass Figure 5. Crosstalk V+ V+ COM Meter IN 0 V, V+ NC or NO HP4192A Impedance Analyzer or Equivalent GND f = 1 MHz Figure 6. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?69977. Document Number: 69977 S09-0396-Rev. B, 09-Mar-09 www.vishay.com 7 Package Information Vishay Siliconix MINIQFN-8L CASE OUTLINE A D 6 5 5 6 7 L 7 b 4 8 4 E 8 L L L 1 2 3 3 2 1 A A1 c e MILLIMETERS INCHES DIM MIN. NOM. MAX. MIN. NOM. MAX. A 0.50 0.55 0.60 0.0197 0.0217 0.0236 A1 0.00 - 0.05 0.000 - 0.002 b 0.15 0.20 0.25 0.006 0.008 0.010 c 0.15 REF 0.006 REF D 1.35 1.40 1.45 0.053 0.055 0.057 E 1.35 1.40 1.45 0.053 0.055 0.057 e L 0.40 BSC 0.35 0.40 0.016 BSC 0.45 0.014 0.016 0.018 ECN: C-08336-Rev. A, 05-May-08 DWG: 5964 Document Number: 68674 Revision: 05-May-08 www.vishay.com 1 PAD Pattern Vishay Siliconix RECOMMENDED MINIMUM PADS FOR MINI QFN 8L 1.70 0.80 1.70 0.60 x6 0.125 typ. 0.25 x2 0.50 0.40 0.25 x6 Suggested Minimum Pad Dimensions in mm Document Number: 66555 Revision: 05-Mar-10 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000