DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
16 , Low Parasitic Capacitance and Leakage,
+12 V / +5 V / +3 V / ± 5 V Quad SPST Switches
DESCRIPTION
FEATURES
The DG411LE, DG412LE, and DG413LE are monolithic
quad single-pole-single-throw analog switches. The
DG411LE and DG412LE differ only in that they respond to
opposite logic levels. The DG413LE has two normally open
and two normally closed switches. It can be given various
configurations, including four SPST, two SPDT, and one
DPDT.
• 3 V to 16 V single supply or ± 3 V to ± 8 V dual
supply
Available
• On-resistance RDS(on): 16
• Low parasitic capacitance:
Available
CD(ON): 15 pF
CS(OFF): 5 pF
• Less than 8 pC charge injection over the full signal swing
range
• Fast switching tON: 16 ns
tOFF: 9 ns
• TTL, CMOS compatible
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DG411LE, DG412LE, and DG413LE offer low on
resistance of 16 , low parasitic capacitance of 15 pF
switch on capacitance, and low charge injection over the
signal swing range.
The DG411LE, DG412LE, and DG413LE operate on single
and dual supplies. Single supply voltage ranges from 3 V
to 16 V while dual supply operation is recommended with
± 3 V to ± 8 V. Each switch conducts equally well in both
direction when on, and blocks input voltages up to the
supply levels when off.
The DG411LE, DG412LE, and DG413LE are available in
16 lead TSSOP, SOIC, and PDIP packages.
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
BENEFITS
•
•
•
•
Wide operation voltage range
Low signal errors and distortion
Fast switching time
Minimized switching glitch
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
Automatic test equipment
Data acquisition systems
Meters and instruments
Medical and healthcare systems
Communication systems
Audio and video signal routing
Relay replacement
Battery powered systems
Computer peripherals
Audio and video signal routing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG411LE, DG412LE
Dual-In-Line, TSSOP and SOIC
DG413LE
Dual-In-Line, TSSOP and SOIC
IN1
1
16
IN2
IN1
1
16
IN2
D1
2
15
D2
D1
2
15
D2
S1
3
14
S2
S1
3
14
S2
V-
4
13
V+
V-
4
13
V+
GND
5
12
VL
GND
5
12
VL
S4
6
11
S3
D4
7
IN4
10
8
9
D3
IN3
S4
6
11
S3
D4
7
10
D3
IN4
8
9
IN3
Top View
Top View
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
1
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TRUTH TABLE
TRUTH TABLE
LOGIC
DG411LE
DG412LE
LOGIC
SW1, SW4
SW2, SW3
0
ON
OFF
0
OFF
ON
1
OFF
ON
1
ON
OFF
Logic “0” 0.8 V
Logic “1” 2.4 V
Logic “0” 0.8 V
Logic “1” 2.4 V
ORDERING INFORMATION
TEMP. RANGE
CONFIGURATION
PACKAGE
PART NUMBER
16-pin TSSOP
DG411LE
16-pin SOIC
16-pin PDIP
16-pin TSSOP
-40 °C to +85 °C
Lead-free
DG412LE
16-pin SOIC
16-pin PDIP
16-pin TSSOP
DG413LE
16-pin SOIC
16-pin PDIP
MIN. ORDER / PACK. QUANTITY
DG411LEDQ-GE3
Tube 360 units
DG411LEDQ-T1-GE3
Tape and reel, 3000 units
DG411LEDY-GE3
Tube 500 units
DG411LEDY-T1-GE3
Tape and reel, 2500 units
DG411LEDJ-GE3
Tube 500 units
DG412LEDQ-GE3
Tube 360 units
DG412LEDQ-T1-GE3
Tape and reel, 3000 units
DG412LEDY-GE3
Tube 500 units
DG412LEDY-T1-GE3
Tape and reel, 2500 units
DG412LEDJ-GE3
Tube 500 units
DG413LEDQ-GE3
Tube 360 units
DG413LEDQ-T1-GE3
Tape and reel, 3000 units
DG413LEDY-GE3
Tube 500 units
DG413LEDY-T1-GE3
Tape and reel, 2500 units
DG413LEDJ-GE3
Tube 500 units
ABSOLUTE MAXIMUM RATINGS
PARAMETER
LIMIT
V+ to VGND to V-
18
VL
(GND -0.3) to (V+) +0.3
V
-0.3 to (V+) +0.3
or 30 mA, whichever occurs first
IN a, VS, VD
Continuous Current (Any terminal)
30
Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle)
100
Storage Temperature
Power Dissipation (Packages)
UNIT
-0.3 to +18
b
(DQ, DY suffix)
-65 to +125
(AK suffix)
-65 to +150
16-pin TSSOP c
450
16-pin
SOIC d
16-pin CerDIP e
650
mA
°C
mW
900
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC® JS-001
2500
V
Latch Up Current, per JESD78D
400
mA
Notes
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings
b. All leads welded or soldered to PC board
c. Derate 7 mW/°C above 75 °C
d. Derate 7.6 mW/°C above 75 °C
e. Derate 12 mW/°C above 75 °C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
2
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
SPECIFICATIONS
a
Vishay Siliconix
(Single Supply 12 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE
SPECIFIED
V+ = 12 V, V- = 0 V
VL = 5 V, VIN = 2.4 V, 0.8 V f
TEMP.
b
TYP. c
A SUFFIX
D SUFFIX
LIMITS
LIMITS
-55 °C to +125 °C -40 °C to +85 °C UNIT
MIN. d
MAX. d
MIN. d MAX. d
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
VANALOG
RDS(on)
V+ = 10.8 V, V- = 0 V
IS = 10 mA, VD = 2/9 V
IS(off)
VD = 1/11 V, VS = 11/1 V
Switch Off Leakage Current
ID(off)
Channel On Leakage
Current
ID(on)
VS = VD = 11/1 V
Full
-
0
12
0
12
V
Room
16
-
26
-
26
Full
-
-
40
-
35
Room
-
-1
1
-1
1
10
Full
-
-15
15
-10
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
0.01
-1.5
1.5
-1
1
-1.5
1.5
-1
1
nA
Digital Control
Input Current, VIN Low
IIL
VIN under test = 0.8 V
Full
Input Current, VIN High
IIH
VIN under test = 2.4 V
Full
μA
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
Break-Before-Make
Time Delay
Charge Injection e
RL = 300 , CL = 35 pF,
VS = 5 V, see figure 2
Room
16
-
50
-
50
Full
-
-
70
-
60
Room
9
-
30
-
30
Full
-
-
48
-
40
5
-
-
-
-
tD
DG413L only, VS = 5 V,
RL = 300 , CL = 35 pF
Room
Q
Vg = 0 V, Rg = 0 , CL = 10 nF
Room
6.6
-
-
-
-
Room
68.4
-
-
-
-
Room
114
-
-
-
-
Off-Isolation e
OIRR
Channel-to-Channel
Crosstalk e
XTALK
Source Off Capacitance e
CS(off)
Drain Off Capacitance e
CD(off)
Channel-On Capacitance e
CD(on)
RL = 50 , CL = 5 pF, f = 1 MHz
f = 1 MHz
Room
5
-
-
-
-
Room
6
-
-
-
-
Room
15
-
-
-
-
Room
0.02
-
1
-
1
Full
-
-
7.5
-
5
Room
-0.002
-1
-
-1
-
Full
-
-7.5
-
-5
-
Room
0.002
-
1
-
1
ns
pC
dB
pF
Power Supplies
Positive Supply Current
Negative Supply Current
I+
IVIN = 0 V or 5 V
Logic Supply Current
Ground Current
IL
IGND
Full
-
-
7.5
-
5
Room
-0.002
-1
-
-1
-
Full
-
-7.5
-
-5
-
μA
Notes
a. Refer to PROCESS OPTION FLOWCHART
b. Room = 25 °C, full = as determined by the operating temperature suffix
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
e. Guaranteed by design, not subject to production test
f. VIN = input voltage to perform proper function
g. Leakage parameters are guaranteed by worst case test conditions and not subject to test
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
3
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
SPECIFICATIONS
a
Vishay Siliconix
(Dual Supply ± 5 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE
SPECIFIED
V+ = 5 V, V- = -5 V
VL = 5 V, VIN = 2.4 V, 0.8 V f
TEMP. b
TYP. c
A SUFFIX
D SUFFIX
LIMITS
LIMITS
-55 °C to +125 °C -40 °C to +85 °C UNIT
MIN. d
MAX. d
MIN. d MAX. d
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
Switch Off
Leakage Current g
VANALOG
RDS(on)
IS(off)
ID(off)
Channel On
Leakage Current g
V+ = 5 V, V- = -5 V,
IS = 10 mA, VD = ± 3.5 V
V+ = 5.5, V- = -5.5 V,
VD = ± 4.5 V, VS = ± 4.5 V
Full
-
-5
5
-5
5
V
Room
18
-
30
-
30
Full
-
-
42
-
37
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
ID(on)
V+ = 5.5 V, V- = -5.5 V,
VS = VD = ± 4.5 V
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
Input Current, VIN Low e
IIL
VIN under test = 0.8 V
Full
0.05
-1.5
1.5
-1
1
Input Current, VIN High e
IIH
VIN under test = 2.4 V
Full
0.05
-1.5
1.5
-1
1
Room
17
-
50
-
50
Full
-
-
70
-
60
Room
12
-
35
-
35
Full
-
-
50
-
40
nA
Digital Control
μA
Dynamic Characteristics
Turn-On Time e
Turn-Off Time e
Break-Before-Make Time
Delay e
Charge Injection e
tON
tOFF
RL = 300, CL = 35 pF,
VS = ± 3.5 V, see figure 2
tD
DG413L only, VS = 3.5 V,
RL = 300, CL = 35 pF
Room
5
-
-
-
-
Q
Vg = 0 V, Rg = 0 , CL = 10 nF
Room
5.8
-
-
-
-
Room
68
-
-
-
-
Room
113
-
-
-
-
Room
5
-
-
-
-
Room
6
-
-
-
-
Room
14
-
-
-
-
Room
0.03
-
1
-
1
Full
-
-
7.5
-
5
Room
-0.002
-1
-
-1
-
Full
-
-7.5
-
-5
-
Room
0.002
-
1
-
1
Off Isolation e
OIRR
Channel-to-Channel
Crosstalk e
XTALK
Source Off Capacitance e
CS(off)
Drain Off Capacitance e
CD(off)
Channel On Capacitance e
CD(on)
RL = 50 , CL = 5 pF, f = 1 MHz
f = 1 MHz
ns
pC
dB
pF
Power Supplies
Positive Supply Current e
Negative Supply Current e
I+
IVIN = 0 V or 5 V
Logic Supply Current e
Ground Current e
IL
IGND
Full
-
-
7.5
-
5
Room
-0.002
-1
-
-1
-
Full
-
-7.5
-
-5
-
μA
Notes
a. Refer to PROCESS OPTION FLOWCHART
b. Room = 25 °C, full = as determined by the operating temperature suffix
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
e. Guaranteed by design, not subject to production test
f. VIN = input voltage to perform proper function
g. Leakage parameters are guaranteed by worst case test conditions and not subject to test
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
4
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
SPECIFICATIONS
a
PARAMETER
Vishay Siliconix
(Single Supply 5 V)
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE
SPECIFIED
V+ = 5 V, V- = 0 V
VL = 5 V, VIN = 2.4 V, 0.8 V f
TEMP. b
TYP. c
A SUFFIX
D SUFFIX
LIMITS
LIMITS
-55 °C to +125 °C -40 °C to +85 °C
MIN.
d
MAX.
d
MIN.
d
UNIT
MAX. d
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance e
VANALOG
RDS(on)
V+ = 4.5 V,
IS = 5 mA, VD = 1 V, 3.5 V
Full
-
-
5
-
5
V
Room
36
-
50
-
50
Full
-
-
88
-
75
Room
27
-
50
-
50
Hot
-
-
90
-
60
Room
15
-
30
-
30
Hot
-
-
55
-
40
Dynamic Characteristics
Turn-On Time e
tON
Turn-Off Time e
tOFF
Break-Before-Make Time
Delay e
Charge Injection
e
RL = 300 , CL = 35 pF,
VS = 3.5 V, see figure 2
tD
DG413L only, VS = 3.5 V,
RL = 300 , CL = 35 pF
Room
11
-
-
-
-
Q
Vg = 0 V, Rg = 0 , CL = 10 nF
Room
3.3
-
-
-
-
Room
0.02
-
1
-
1
Hot
-
-
7.5
-
5
Room
-0.002
-1
-
-1
-
Hot
-
-7.5
-
-5
-
Room
0.002
-
1
-
1
5
ns
pC
Power Supplies
Positive Supply Current e
Negative Supply Current e
I+
IVIN = 0 V or 5 V
Logic Supply Current e
Ground Current e
IL
IGND
Hot
-
-
7.5
-
Room
-0.002
-1
-
-1
-
Hot
-
-7.5
-
-5
-
μA
Notes
a. Refer to PROCESS OPTION FLOWCHART
b. Room = 25 °C, full = as determined by the operating temperature suffix
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
e. Guaranteed by design, not subject to production test
f. VIN = input voltage to perform proper function
g. Leakage parameters are guaranteed by worst case test conditions and not subject to test
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
5
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
SPECIFICATIONS
a
Vishay Siliconix
(Single Supply 3 V)
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE
SPECIFIED
V+ = 3 V, V- = 0 V
VL = 3 V, VIN = 0.4 V, 2.0 V f
TEMP.
b
TYP. c
A SUFFIX LIMITS
D SUFFIX
-55 °C to +125
LIMITS
°C
-40 °C to +85 °C UNIT
MIN. d MAX. d MIN. d MAX. d
Analog Switch
Analog Signal Range e
Drain-Source
On-Resistance
Switch Off
Leakage Current g
VANALOG
RDS(on)
IS(off)
ID(off)
Channel On
Leakage Current g
V+ = 2.7 V, V- = 0 V,
IS = 5 mA, VD = 0.5, 2.2 V
V+ = 3.3, V- = 0 V,
VD = 1, 2 V, VS = 2, 1 V
Full
-
0
3
0
3
V
Room
106
-
130
-
130
Full
-
-
150
-
140
Room
-
-1
1
-1
1
10
Full
-
-15
15
-10
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
Room
-
-1
1
-1
1
Full
-
-15
15
-10
10
ID(on)
V+ = 3.3 V, V- = 0 V,
VS = VD = 1, 2 V
Input Current, VIN Low
IIL
VIN under test = 0.4 V
Full
0.005
-1.5
1.5
-1
1
Input Current, VIN High
IIH
VIN under test = 2.4 V
Full
0.005
-1.5
1.5
-1
1
Room
57
-
85
-
85
Full
-
-
150
-
110
Room
25
-
60
-
60
Full
-
-
100
-
85
Room
24
-
-
-
-
nA
Digital Control
μA
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
Break-Before-Make Time
Delay
Charge Injection e
RL = 300 , CL = 35 pF,
VS = 1.5 V, see figure 2
tD
DG413L only, VS = 1.5 V,
RL = 300 , CL = 35 pF
Q
Vg = 0 V, Rg = 0 , CL = 10 nF
Off Isolation e
OIRR
Channel-to-Channel
Crosstalk e
XTALK
Source Off Capacitance e
CS(off)
Drain Off Capacitance e
CD(off)
Channel On Capacitance e
CD(on)
RL = 50 , CL = 5 pF, f = 1 MHz
f = 1 MHz
Room
2
-
-
-
-
Room
68
-
-
-
-
Room
107
-
-
-
-
Room
6
-
-
-
-
Room
7
-
-
-
-
Room
15
-
-
-
-
ns
pC
dB
pF
Notes
a. Refer to PROCESS OPTION FLOWCHART
b. Room = 25 °C, full = as determined by the operating temperature suffix
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet
e. Guaranteed by design, not subject to production test
f. VIN = input voltage to perform proper function
g. Leakage parameters are guaranteed by worst case test conditions and not subject to test
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
6
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
90
24
TA = 25 °C
IS = 10 mA
V+ = +3.0 V
80
70
20
60
50
V+ = +5.0 V
40
V+ = +12.0 V
30
V+ = +16.0 V
RON - On-Resistance (Ω)
RON - On-Resistance (Ω)
TA = 25 °C
IS = 10 mA
22
18
14
12
20
10
10
8
0
V± = ± 5.0 V
16
V± = ± 8.0 V
6
0
2
4
6
8
10
12
14
16
-8
-6
-4
VD - Analog Voltage (V)
2
4
6
8
RDS(on) vs. Drain Voltage and Temperature (Single Supply)
30
35
25
30
+125 °C
+125 °C
RON - On-Resistance (Ω)
RON - On-Resistance (Ω)
0
VD - Analog Voltage (V)
RDS(on) vs. Drain Voltage (Single Supply)
+85 °C
20
15
10
+25 °C
5
-55 °C
-40 °C
V+ = +12 V
IS = 10 mA
25
+85 °C
20
15
10
5
0
+25 °C
V± = ± 5.0 V
IS = 10 mA
-55 °C
-40 °C
0
0
1
2
3
4
5
6
7
8
9
10 11 12
-5
-4
-3
-2
VD - Analog Voltage (V)
-1
0
1
2
3
4
5
VD - Analog Voltage (V)
RDS(on) vs. Drain Voltage and Temperature
Supply Current vs. Temperature
50
100
+125 °C
45
90
+85 °C
40
35
30
25
20
-40 °C
+25 °C
V+ = +5 V
IS = 10 mA
15
V+ = +5.5 V
V- = 0 V
IN = 0 V
80
I+ - Supply Current (nA)
RON - On-Resistance (Ω)
-2
70
60
50
40
30
20
-55 °C
10
10
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
VD - Analog Voltage (V)
RDS(on) vs. Drain Voltage and Temperature
S19-0672-Rev. B, 05-Aug-2019
5.0
-40
-20
0
20
40
60
80
100
120
Temperature (°C)
Switching Time vs. Single Supply
Document Number: 78091
7
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
40
10.0
V+ = +5 V
V- = -5 V
30
8.0
QINJ - Charge Injection (pC)
ID(ON)
20
Leakage Current (pA)
V+ = 12 V
9.0
10
0
-10
ID(OFF)
IS(OFF)
-20
-30
V± = ± 5 V
7.0
6.0
5.0
V+ = 5 V
4.0
3.0
2.0
1.0
-40
V+ = 3V
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
-5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
VD - Analog Voltage (V)
VD - Drain Voltage (V), VS = -VD
Charge Injection vs. Drain Voltage
Leakage Current vs. Drain Voltage
60
2.2
55
2.1
Single supply
2.0
45
VIH
1.9
VTH - Threshold (V)
Switching Speed (ns)
50
VL = V+ (for V+ < 5 V) and 5 V (V+ ≥ 5 V)
40
35
30
25
tON
20
VIL
1.8
1.7
1.6
1.5
1.4
15
tOFF
10
1.3
5
1.2
0
1.1
2
4
6
8
10
12
14
2
16
4
6
V+ - Positive Supply Voltage (V)
10
12
14
16
Threshold vs. Single Supply Current
Switching Time vs. Single Supply Voltage
30
20
25
Dual supply
CD(ON), V+ = +5 V
Capacitance (pF)
16
20
tON
15
tOFF
Single supply
CD(ON), V+ = +3 V
18
Switching Speed (ns)
8
V+ - Positive Supply Voltage (V)
CD(ON), V+ = +12 V
14
12
CD(OFF), V+ = +3 V
CD(OFF), V+ = +5 V
CD(OFF), V+ = +12 V
10
8
10
6
4
5
CS(OFF), V+ = +3 V
CS(OFF), V+ = +5 V
2
CS(OFF), V+ = +12 V
0
0
3
4
5
6
7
V+/- - Positive Supply Voltage (V)
Switching Time vs. Dual Supply Voltage
S19-0672-Rev. B, 05-Aug-2019
8
0
1
2
3
4
5
6
7
8
9
10 11 12
Analog Voltage (V)
Drain Capacitance vs. Drain Voltage (Single Supply)
Document Number: 78091
8
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10
20
Dual supply
0
18
-10
CD(ON), V± = ± 5 V
14
12
10
CD(OFF), V± = ± 5 V
8
Insertion loss, -3 dB = 301 MHz
-20
Loss, OIRR, XTALK (dB)
Capacitance (pF)
16
6
-30
-40
V+ = +3 V
V- = 0 V
-50
OIRR
-60
-70
XTALK
-80
-90
4
-100
CS(OFF), V± = ± 5 V
2
-110
-120
100K
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
Analog Voltage (V)
1M
10M
100M
1G
Frequency (Hz)
Drain Capacitance vs. Drain Voltage (Dual Supply)
Insertion Loss, Off Isolation and Crosstalk vs. Frequency
SCHEMATIC DIAGRAM (Typical Channel)
V+
S
VL
VVIN
Level
Shift/
Drive
V+
GND
D
V-
Fig. 1
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
9
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
VL
V+
tr < 20 ns
tf < 20 ns
3V
Logic
Input
50%
0V
VL
VS
V+
S
tON
D
Switch
Input*
VO
VS
VO
IN
RL
300 Ω
V-
GND
CL
35 pF
0V
Switch
Output
tON
90 %
VO
- VS
Switch
Input*
V-
90 %
CL (includes fixture and stray capacitance)
RL
VO = V S
Note:
RL + rDS(on)
Logic input waveform is inverted for switches that
have the opposite logic sense control
Fig. 2 - Switching Time
VL
V+
3V
Logic
Input
VS1
S1
D1
VO1
IN1
VS2
Switch
Output
IN2
RL1
300 Ω
V-
GND
90 %
VO2
D2
S2
50 %
0V
VS1
VO1
RL2
300 Ω
CL1
35 pF
CL2
35 pF
0V
VS2
VO2
0V
Switch
Output
90 %
tD
tD
VCL (includes fixture and stray capacitance)
Fig. 3 - Break-Before-Make (DG413LE)
VL
ΔVO
V+
VO
Rg
VL
V+
S
IN
Vg
OFF
VO
ON
OFF
CL
10 nF
3V
GND
INX
D
VINX
V-
OFF
ON
Q = ΔVO x CL
OFF
INX dependent on switch configuration Input polarity determined
by sense of switch.
Fig. 4 - Charge Injection
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
10
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG411LE, DG412LE, DG413LE
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
VL
C
VL
S1
VS
Rg = 50 Ω
V+
C
V+
D1
50 Ω
IN1
0 V, 2.4 V
S2
D2
VO
NC
0 V, 2.4 V
RL
IN2
GND
V-
C
VS
XTALK Isolation = 20 log
VO
V-
C = RF bypass
Fig. 5 - Crosstalk
VL
V+
VL
C
V+
C
C
VL
V+
S
VS
C
VO
D
VL
V+
S
Rg = 50 Ω
0 V, 2.4 V
RL
50 Ω
IN
Meter
IN
GND
V-
C
HP4192A
Impedance
Analyzer
or Equivalent
0 V, 2.4 V
D
GND
VOff Isolation = 20 log
V-
C
VS
VO
V-
C = RF Bypass
Fig. 6 - Off-Isolation
Fig. 7 - Source / Drain Capacitances
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?78091.
S19-0672-Rev. B, 05-Aug-2019
Document Number: 78091
11
For technical questions, contact: analogswitchsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
SOIC (NARROW):
16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
16
15
14
13
12
11
10
Dim
A
A1
B
C
D
E
e
H
L
Ĭ
9
E
1
2
3
4
5
6
7
8
INCHES
Min
Max
Min
Max
1.35
1.75
0.053
0.069
0.10
0.20
0.004
0.008
0.38
0.51
0.015
0.020
0.18
0.23
0.007
0.009
9.80
10.00
0.385
0.393
3.80
4.00
0.149
0.157
1.27 BSC
0.050 BSC
5.80
6.20
0.228
0.244
0.50
0.93
0.020
0.037
0_
8_
0_
8_
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
e
Document Number: 71194
02-Jul-01
B
A1
L
Ĭ
0.101 mm
0.004 IN
www.vishay.com
1
Package Information
Vishay Siliconix
PDIP: 16ĆLEAD
16
15
14
13
12
11
10
9
E
E1
1
2
3
4
5
6
7
8
D
S
Q1
A
A1
L
15°
MAX
C
B1
e1
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
Q1
S
B
eA
MILLIMETERS
Min
Max
INCHES
Min
Max
3.81
5.08
0.150
0.200
0.38
1.27
0.015
0.050
0.38
0.51
0.015
0.020
0.89
1.65
0.035
0.065
0.20
0.30
0.008
0.012
18.93
21.33
0.745
0.840
7.62
8.26
0.300
0.325
5.59
7.11
0.220
0.280
2.29
2.79
0.090
0.110
7.37
7.87
0.290
0.310
2.79
3.81
0.110
0.150
1.27
2.03
0.050
0.080
0.38
1.52
.015
0.060
ECN: S-03946—Rev. D, 09-Jul-01
DWG: 5482
Document Number: 71261
06-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
Nom
Max
A
-
1.10
1.20
A1
0.05
0.10
0.15
A2
-
1.00
1.05
0.38
B
0.22
0.28
C
-
0.127
-
D
4.90
5.00
5.10
E
6.10
6.40
6.70
E1
4.30
4.40
4.50
e
-
0.65
-
L
0.50
0.60
0.70
L1
0.90
1.00
1.10
y
-
-
0.10
θ1
0°
3°
6°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.171
0.014
0.026
0.012
(0.35)
(0.65)
(0.30)
(4.35)
(7.15)
0.281
0.055
(1.40)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
1
Document Number: 63550
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.152
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
(3.861)
0.246
(6.248)
0.047
(1.194)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
