DG9451, DG9453
www.vishay.com
Vishay Siliconix
8-Channel, Triple 2-Channel Multiplexers
DESCRIPTION
FEATURES
The DG9451, and DG9453 are high precision single and
dual supply CMOS analog multiplexers. DG9451 is an
8-channel multiplexer, and the DG9453 is a triple 2-channel
multiplexer or triple SPDT.
• +2.7 V to +12 V single supply operation
± 2.5 V to ± 5 V dual supply operation
• Fully specified at +12 V, +5 V, ± 5 V
• Low charge injection (< 0.5 pC typ.)
Designed to operate from a +2.7 V to +12 V single supply or
from a ± 2.5 V to ± 5 V dual supplies, the DG9451, and
DG9453 are fully specified at +12 V, +5 V and ± 5 V. All
control logic inputs have guaranteed 1.4 V high limit when
operating from +5 V or ± 5 V supplies and 1.65 V when
operating from a +12 V supply.
• High bandwidth: 270 MHz
• Low switch capacitance (Cs(off) 1 pF typ.)
• Good isolation and crosstalk performance
(typ. -44 dB at 100 MHz)
• MiniQFN16 package (1.8 mm x 2.6 mm)
The DG9451, and DG9453 are precision multiplexers of low
leakage, low charge injection, and low parasitic
capacitance. They conduct equally well in both directions,
offer rail to rail analog signal handling and can be used both
as multiplexers as well as de-multiplexers.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Data acquisition
The DG9451, and DG9453 operating temperature is
specified from -40 °C to +85 °C and are available in 16 pin
TSSOP and the ultra compact 1.8 mm x 2.6 mm miniQFN16
packages.
• Medical and healthcare devices
• Control and automation equipments
• Test instruments
• Touch panels
• Consumer
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG9453
mQFN-16
DG9451
mQFN-16
X6
X4
VCC
X2
Y0
Y1
VCC
Y
16
15
14
13
16
15
14
13
X
1
12
X1
Z1
1
12
X
X7
2
11
X0
Z
2
11
X1
X5
3
10
X3
Z0
3
10
X0
ENABLE
4
9
A
ENABLE
4
9
A
Logic
5
6
VEE
GND
77
8
5
6
C
B
VEE
GND
Top View
77
8
C
B
Top View
Yxx
Pin 1
Device Marking: Yxx for DG9451
(miniQFN16)
4xx for DG9453
xx = Date/Lot Traceability Code
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
1
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TRUTH TABLE
SELECT INPUTS
ON SWITCHES
ENABLE
INPUT
C
B
A
DG9451
H
X
X
X
All Switches Open
All Switches Open
L
L
L
L
X to X0
X to X0, Y to Y0, Z to Z0
L
L
L
H
X to X1
X to X1, Y to Y0, Z to Z0
L
L
H
L
X to X2
X to X0, Y to Y1, Z to Z0
L
L
H
H
X to X3
X to X1, Y to Y1, Z to Z0
L
H
L
L
X to X4
X to X0, Y to Y0, Z to Z1
L
H
L
H
X to X5
X to X1, Y to Y0, Z to Z1
L
H
H
L
X to X6
X to X0, Y to Y1, Z to Z1
L
H
H
H
X to X7
X to X1, Y to Y1, Z to Z1
DG9453
ORDERING INFORMATION
TEMP. RANGE
PACKAGE
PART NUMBER
DG9451, DG9453
-40 °C to +125 °C a
DG9451EN-T1-E4
16-Pin miniQFN
DG9453EN-T1-E4
Note
a. -40 °C to +85 °C datasheet limits apply.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
LIMIT
V+ to VGND to VDigital Inputs
UNIT
14
7
a,
VS, VD
Continuous Current (Any Terminal)
30
Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle)
100
Storage Temperature
Power Dissipation b
Thermal Resistance b
Latch-up (per JESD78)
V
(V-) -0.3 to (V+) +0.3
or 30 mA, whichever occurs first
16-Pin miniQFN c, d
16-Pin miniQFN d
mA
-65 to +150
°C
525
mW
152
°C/W
> 300
mA
Notes
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6.6 mW/°C above 70 °C.
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead
terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip
cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
2
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
SPECIFICATIONS FOR DUAL SUPPLIES
PARAMETER
SYMBOL
Analog Switch
Analog Signal Range e
VANALOG
On-Resistance
On-Resistance Match
Channel On
Leakage Current
ID(on)
Digital Control
VIN(A, B, C and ENABLE) Low
VIN(A, B, C and ENABLE) High
Input Current, VIN Low
Input Current, VIN High
Input Capacitance e
Dynamic Characteristics
VIL
VIH
IIL
IIH
CIN
Transition Time
tON
Enable Turn-Off Time
tOFF
Break-Before-Make
Time Delay
5
100
118
6
8
16
18
1
5
1
5
1
5
VIN(A, B, C and ENABLE) under test = 0.3 V
VIN(A, B, C and ENABLE) under test = 1.4 V
f = 1 MHz
Full
Full
Full
Full
Room
0.01
0.01
3.4
1.4
-1
-1
-
0.3
1
1
-
1.4
-1
-1
-
0.3
1
1
-
Room
Full
Room
Full
Room
Full
Room
Full
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
Room
66
152
60
32
< -90
-65
-44
< -90
-74
-44
270
525
0.20
1
1
10
3
16
8
-
180
218
250
295
125
136
13
-
-
180
207
250
282
125
131
13
-
Room
0.01
-
-
-
-
%
Room
Full
Room
Full
Room
Full
0.05
-0.05
-0.05
-
-1
-10
-1
-10
1
10
-
-1
-10
-1
-10
1
10
-
μA
IS = 1 mA, VD = -3 V, 0 V, +3 V
V+ = 5.5 V, V- = -5.5 V,
− 4.5 V
VD = ± 4.5 V, VS = +
RL = 300 Ω, CL = 35 pF
see figure 1, 2, 3
tD
Off Isolation e
OIRR
Channel-to-Channel
Crosstalk e
XTALK
Bandwith, 3 dB
BW
Charge Injection e
Source Off Capacitance
V+ = 5.5 V, V- = -5.5 V,
VS = VD = ± 4.5 V
-5
-1
-5
-1
-5
-1
-5
tTRANS
Enable Turn-On Time
Q
e
CS(off)
Drain Off Capacitance e
CD(off)
Channel On Capacitance e
CD(on)
Total Harmonic Distortion e
THD
UNIT
5
100
125
6
10
16
20
1
50
1
50
1
50
IS = 1 mA, VD = ± 3 V
ID(off)
MAX. d MIN. d MAX. d
-5
-1
-50
-1
-50
-1
-50
ΔRON
IS(off)
Switch Off
Leakage Current
MIN. d
66
3
10.2
± 0.02
± 0.02
± 0.02
-
IS = 1 mA, VD = -3 V, 0 V, +3 V
S
-40 °C to +125 °C -40 °C to +85 °C
TEMP. b TYP. c
Full
Room
Full
Room
Full
Room
Full
Room
Full
Room
Full
Room
Full
RON
RFLATNES
On-Resistance Flatness
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
VCC = +5 V, VEE = -5 V
VIN(A, B, C AND ENABLE) = 1.4 V, 0.3 V a
f = 100 kHz
f = 10 MHz
f = 100 MHz
RL = 50 Ω, CL = 15 pF
f = 100 kHz
f = 10 MHz
f = 100 MHz
DG9451
RL = 50 Ω
DG9453
Vg = 0 V, Rg = 0 Ω, CL = 1 nF
DG9451
f = 1 MHz
DG9453
DG9451
f = 1 MHz
DG9453
DG9451
f = 1 MHz
DG9453
Signal = 1 VRMS,
20 Hz to 20 kHz, RL = 600 Ω
V
Ω
nA
V
μA
pF
ns
dB
MHz
pC
pF
Power Supplies
Power Supply Current
I+
Negative Supply Current
I-
Ground Current
S14-2340-Rev. C, 08-Dec-14
IGND
VCC = +5 V, VEE = -5 V
VIN(A, B, C and ENABLE) = 0 V or 5 V
Document Number: 65020
3
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
SPECIFICATIONS FOR UNIPOLAR SUPPLIES
PARAMETER
SYMBOL
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
VCC = +5 V, VEE = 0 V
VIN(A, B, C AND ENABLE) = 1.4 V, 0.3 V a
-40 °C to +125 °C -40 °C to +85 °C
TEMP. b
TYP.
a
MIN. d
MAX. d
MIN. d MAX. d
UNIT
Analog Switch
Analog Signal Range e
VANALOG
On-Resistance
RON
ΔRON
IS = 1 mA, VD = +3.5 V
RFLATNESS
IS = 1 mA, VD = 0 V, +3 V
On-Resistance Match
On-Resistance Flatness
IS = 1 mA, VD = 0 V, +3.5 V
Switch Off
Leakage Current
IS(off)
ID(off)
Channel On
Leakage Current
ID(on)
V+ = +5.5 V, V- = 0 V
VD = 1 V/4.5 V, VS = 4.5 V/1 V
V+ = +5.5 V, V- = 0 V
VD = VS = 1 V/4.5 V
Full
-
0
5
0
5
Room
105
-
165
-
165
194
Full
-
-
205
-
Room
3.2
-
8
-
8
Full
-
-
13
-
10
Room
17
-
26
-
26
Full
-
-
30
-
28
Room
± 0.02
-1
1
-1
1
Full
-
-50
50
-5
5
Room
± 0.02
-1
1
-1
1
Full
-
-50
50
-5
5
Room
± 0.02
-1
1
-1
1
Full
-
-50
50
-5
5
0.3
V
Ω
nA
Digital Control
VIN(A, B, C and ENABLE) Low
VIL
Full
-
-
0.3
-
VIN(A, B, C and ENABLE) High
VIH
Full
-
1.4
-
1.4
Input Current, VIN Low
IL
VIN(A, B, C and ENABLE) under test = 0.3 V
Full
0.01
-1
1
-1
1
Input Current, VIN High
IH
VIN(A, B, C and ENABLE) under test = 1.4 V
Full
0.01
-1
1
-1
1
Room
79
-
205
-
205
Full
-
-
295
-
285
Room
220
-
335
-
335
Full
-
-
403
-
393
Room
93
-
150
-
150
Full
-
-
173
-
163
Room
36
-
-
-
20
V
μA
Dynamic Characteristics
Transition Time
tTRANS
Enable Turn-On Time
tON
Enable Turn-Off Time
tOFF
Break-Before-Make
Time Delay
tD
Charge Injection e
Q
RL = 300 Ω, CL = 35 pF
See Figure 1, 2, 3
Vg = 0 V, Rg = 0 Ω, CL = 1 nF
Off Isolation e
OIRR
Channel-to-Channel
Crosstalk e
XTALK
RL = 50 Ω, CL = 15 pF
f = 100 kHz
CS(off)
f = 1 MHz
Full
-
-
20
-
Full
0.81
-
-
-
-
Room
< -90
-
-
-
-
Room
< -90
-
-
-
-
Room
1
-
-
-
-
ns
pC
dB
Dynamic Characteristics
Source Off Capacitance e
Drain Off Capacitance e
CD(off)
f = 1 MHz
Channel On Capacitance e
CD(on)
f = 1 MHz
DG9451
DG9453
Room
1
-
-
-
-
DG9451
Room
11
-
-
-
-
DG9453
Room
3
-
-
-
-
DG9451
Room
17
-
-
-
-
DG9453
Room
9
-
-
-
-
Room
0.05
-
1
-
1
Full
-
-
10
-
10
Room
-0.05
-1
-
-1
-
Full
-
-10
-
-10
-
Room
-0.05
-1
-
-1
-
Full
-
-10
-
-10
-
pF
Power Supplies
Power Supply Current
I+
Negative Supply Current
I-
Ground Current
S14-2340-Rev. C, 08-Dec-14
IGND
VIN(A, B, C and ENABLE) = 0 V or 5 V
μA
Document Number: 65020
4
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
SPECIFICATIONS FOR UNIPOLAR SUPPLIES
PARAMETER
Analog Switch
Analog Signal Range e
On-Resistance
On-Resistance Match
On-Resistance Flatness
Switch Off
Leakage Current
Channel On
Leakage Current
Digital Control
VIN(A, B, C and ENABLE) Low
VIN(A, B, C and ENABLE) High
Input Current, VIN Low
Input Current, VIN High
Dynamic Characteristics
Transition Time
SYMBOL
VANALOG
V+ = +12 V, V- = 0 V
VD = VS = 1 V/11 V
VIN(A, B, C and ENABLE) under test = 0.5 V
VIN(A, B, C and ENABLE) under test = 1.6 V
Full
Full
Full
Full
0.01
0.01
1.6
-1
-1
0.5
1
1
1.6
-1
-1
0.5
1
1
Room
Full
Room
Full
Room
Full
Room
Full
Room
55
106
65
30
0.79
-
135
166
185
219
130
144
12
-
-
135
155
185
205
130
137
12
-
Room
< -90
-
-
-
-
Room
< -90
-
-
-
-
DG9451
DG9453
DG9451
DG9453
DG9451
DG9453
Room
Room
Room
Room
Room
Room
1
1
9
3
15
8
-
-
-
-
pF
VIN(A, B, C and ENABLE) = 0 V or 12 V
Room
Full
Room
Full
Room
Full
0.05
-0.05
-0.05
-
-1
-10
-1
-10
1
10
-
-1
-10
-1
-10
1
10
-
μA
V+ = +12 V, V- = 0 V
VD = 1 V/11 V, VS = 11 V/1 V
tTRANS
Enable Turn-Off Time
tOFF
UNIT
D
12
105
137
7
8
45
47
1
5
1
5
1
5
IS = 1 mA, VD = 0.7 V, +11.3 V
tON
MAX.
0
-1
-5
-1
-5
-1
-5
RFLATNESS
VIL
VIH
IL
IH
MIN. d
12
105
143
7
10
45
49
1
50
1
50
1
50
IS = 1 mA, VD = +0.7 V
ID(on)
MAX. d MIN. d
0
-1
-50
-1
-50
-1
-50
ΔRON
ID(off)
TYP.
c
68
4
32
± 0.02
± 0.02
± 0.02
-
IS = 1 mA, VD = 0.7 V, 6 V, 11.3 V
IS(off)
-40 °C to +125 °C -40 °C to +85 °C
TEMP. b
Full
Room
Full
Room
Full
Room
Full
Room
Full
Room
Full
Room
Full
RON
Enable Turn-On Time
Break-Before-Make
Time Delay
Charge Injection e
Dynamic Characteristics
Off Isolation e
Channel-to-Channel
Crosstalk e
TEST CONDITIONS
UNLESS OTHERWISE SPECIFIED
VCC = +12 V, VEE = 0 V
V = 1.6 V, 0.5 V a
RL = 300 Ω, CL = 35 pF
see figure 1, 2, 3
tD
Q
Vg = 0 V, Rg = 0 Ω, CL = 1 nF
OIRR
XTALK
RL = 50 Ω, CL = 15 pF
f = 100 kHz
Source Off Capacitance e
CS(off)
f = 1 MHz
Drain Off Capacitance e
CD(off)
f = 1 MHz
Channel On Capacitance e
CD(on)
f = 1 MHz
V
Ω
nA
V
μA
ns
pC
dB
Power Supplies
Power Supply Current
I+
Negative Supply Current
I-
Ground Current
IGND
Notes
a. VIN = input voltage to perform proper function.
b. Room -25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e. Guaranteed by design, not subject to production test.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
5
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
300
500
T = 25 °C
IS = 1 mA
450
250
RON - On-Resistance (Ω)
RON - On-Resistance (Ω)
400
VCC = 2.7 V
350
300
VCC = 3.0 V
250
VCC = 5.0 V
200
VCC = 10.8 V
VCC = 12.0 V
VCC = 13.2 V
150
T = 25 °C
IS = 1 mA
100
VCC = + 5.0 V
VEE = - 5.0 V
200
VCC = + 6.2 V
VEE = - 6.2 V
VCC = + 2.7 V
VEE = - 2.7 V
150
100
50
50
0
0
2
4
6
8
10
12
0
-7
14
-5
-3
VD - Analog Voltage (V)
-1
1
3
5
7
VD - Analog Voltage (V)
On-Resistance vs. VD and Signal Supply Voltage
On-Resistance vs. Analog Voltage and Temperature
400
500
VCC = 3.0 V, VEE = 0 V
IS = 1 mA
450
VCC = 5.0 V, VEE = 0 V
IS = 1 mA
350
350
RON - On-Resistance (Ω)
RON - On-Resistance (Ω)
400
- 40 °C
+ 25 °C
+ 85 °C
300
+ 125 °C
250
200
150
300
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
250
200
150
100
100
50
50
0
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0
0.5
1.0
VD - Analog Voltage (V)
2.0
2.5
3.0
3.5
4.0
4.5
5.0
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage and Temperature
On-Resistance vs. Analog Voltage and Temperature
250
250
VCC = 12.0 V, VEE = 0 V
IS = 1 mA
250
225
225
175
150
125
100
75
150
125
100
75
50
25
25
0
1
2
3
4
5
6
7
8
9
10 11 12
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage and Temperature
S14-2340-Rev. C, 08-Dec-14
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
175
50
0
VCC = 5.0 V, VEE = - 5 V
IS = 1 mA
200
+ 125 °C
+ 85 °C
+ 25 °C
- 40 °C
200
RON - On-Resistance (Ω)
RON - On-Resistance (Ω)
1.5
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
VD - Analog Voltage (V)
On-Resistance vs. Analog Voltage and Temperature
Document Number: 65020
6
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10 mA
100 000
1 mA
10 000
100 μA
Leakage Current (pA)
I+ - Supply Current (A)
VCC = + 13.2 V
VEE = 0 V
VCC = + 5.0 V
VEE = - 5.0 V
10 μA
ICC
1 μA
IGND
100 nA
10 nA
100
ID(ON)
IS(OFF)
1
10
100
1K
10K
100K
1M
0.1
- 60
10M
- 20
20
Input Switching Frequency (Hz)
100
140
Leakage Current vs. Temperature
100 000
3.0
VCC = + 5.5 V
VEE = - 5.5 V
- 40 °C to + 125 °C
2.5
VT - Switching Threshold (V)
10 000
Leakage Current (pA)
60
Temperature (°C)
Supply Current vs. Input Switching Frequency
1000
100
10
ID(ON)
ID(OFF)
1
0.1
- 60
20
1.5
VIH
1.0
VIL
0.5
IS(OFF)
- 20
2.0
60
100
0
140
0
2
4
Temperature (°C)
Loss
0
1.50
QINJ - Charge Injection (pC)
- 10
VCC = + 5.0 V
VEE = - 5.0 V
RL = 50 Ω
- 40
- 50
OIRR
- 60
12
14
- 70
XTALK
VCC = + 12.0 V
VEE = 0 V
VCC = + 5.0 V
VEE = - 5.0 V
1.00
0.50
0
- 0.50
VCC = + 5.0 V
VEE = 0 V
- 1.00
- 80
- 1.50
- 90
- 100
100K
10
2.00
DG9451
- 30
8
Switching Threshold vs. Supply Voltage
10
- 20
6
V+ - Supply Voltage (V)
Leakage Current vs. Temperature
Loss, OIRR, XTALK (dB)
ID(OFF)
10
IEE
1 nA
100 pA
1000
1M
10M
100M
1G
Frequency (Hz)
DG9451 Insertion Loss, Off-Isolation, Crosstalk vs. Frequency
S14-2340-Rev. C, 08-Dec-14
- 2.00
-5
-3
-1
1
3
5
7
9
11
VS - Analog Voltage (V)
DG9451 Charge Injection vs. Analog Voltage
Document Number: 65020
7
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
400
10
DG9453
tON(EN), tOFF(EN) - Switching Time (ns)
0
- 10
- 20
VCC = + 5.0 V
VEE = - 5.0 V
RL = 50 Ω
Gain (dB)
- 30
- 40
- 50
OIRR
- 60
- 70
XTALK
- 80
- 90
- 100
1
VCC = + 5.0 V, VEE = 0 V, tON
VCC = + 5.0 V, VEE = - 5.0 V, tON
VCC = + 12.0 V, VEE = 0 V, tON
VCC = + 5.0 V, VEE = - 5 V, tOFF
VCC = + 5.0 V, VEE = 0 V, tOFF
Loss
10
100
1000
350
300
250
200
150
100
50
VCC = + 12.0 V, VEE = 0 V, tOFF
0
- 60
10 000
- 20
20
Frequency (Hz)
60
80
100
140
Temperature (°C)
Frequency Response
Switching Time vs. Temperature
TEST CIRCUITS
VCC
1.8 V
VA, B, C
VCC
50 Ω
X0
A
B
C
VX0
VX0 or VY0 or VZ0
X1 - X6
90 %
VO
DG9451
X7
VX7
VEE
300 Ω
50 %
VX7
VX3 or VY3
VX1 or VY1 or VZ1
VO
X
ENABLE
GND
50 %
0V
90 %
t TRANS
35 pF
t TRANS
X7 ON (DG9451)
V0 or Y0 or Z0 ON
or
X1 or Y1 or Z1 ON (DG9453)
VEE
VCC
VCC
X0 or Y0
or Z0
VX0 or VY0 or VZ0
X1 or Y1 or Z1
VX1 or VY1 or VZ1
A or B
or C
50 Ω
DG9453
ENABLE
GND
VO
X or Y or Z
VEE
300 Ω
35 pF
VEE
Fig. 1 - Transition Time
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
8
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
VCC
1.8 V
VCC
A
B
C
X0
VCC
VENABLE
X1 - X7
DG9451
VX0 or VY0 or VZ0
VEE
GND
300 Ω
90 %
VO
VO
X
ENABLE
50 Ω
50 %
0V
35 pF
50 %
90 %
0V
t OFF
VEE
tON
Disable X or Y or Z
Enable X or Y or Z
VCC
VCC
X0 or Y0
or Z0
A or B
or C
VCC
X1 or Y1 or Z1
DG9453
VEE
GND
50 Ω
VO
X or Y or Z
ENABLE
300 Ω
35 pF
VEE
Fig. 2 - Enable Switching Time
VCC
1.8 V
VCC
50 Ω
X0 - X7
A
B
C
VCC
VA, B, C
DG9451
50 %
0V
VX0 or VY0 or VZ0
80 %
GND
VO
X
ENABLE
VEE
300 Ω
VO
35 pF
0V
tD
VEE
VCC
VCC
X0, X1 or Y0,
Y1 or Z0, Z1
A or B
or C
VCC
50 Ω
DG9453
ENABLE
GND
VO
X or Y or Z
VEE
300 Ω
35 pF
VEE
Fig. 3 - Break-Before-Make
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
9
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG9451, DG9453
www.vishay.com
Vishay Siliconix
TEST CIRCUITS
VCC
tr < 5 ns
tf < 5 ns
VCC
VCC
A
B
C
Channel
Select
ON
OFF
VENABLE
OFF
0V
Rg
Xx
VO
Vg
VEE
GND
ΔVO
VO
X
ENABLE
1 nF
VEE
Fig. 4 - Charge Injection
VCC
VCC
Network Analyzer
Network Analyzer
VCC
VCC
VIN
A
B
C
A
B
C
X0
Rg = 50 Ω
Vg
VOUT
X
ENABLE
VCC
V EE
GND
VIN
X0
Vg
VOUT
X
ENABLE
VEE
GND
50 Ω
Rg = 50 Ω
50 Ω
VEE
V EE
Insertion Loss = 20 log
Off Isolation = 20 log
VOUT
VIN
Fig. 5 - Insertion Loss
VOUT
VIN
Fig. 7 - Off Isolation
VCC
VCC
Network Analyzer
VCC
A
B
C
X0
VIN
Vg
Rg = 50 Ω
VCC
Channel
Select
A
B
C
X0
|
to
|
Xx
X
50 Ω
Xx
ENABLE
GND
VOUT
VEE
50 Ω
ENABLE
GND
Impedance
Analyzer
X
VEE
VEE
Crosstalk = 20 log
Fig. 6 - Crosstalk
VOUT
VIN
VEE
Fig. 8 - Source, Drain Capacitance
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?65020.
S14-2340-Rev. C, 08-Dec-14
Document Number: 65020
10
For technical questions, contact: powerictechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
Thin miniQFN16 Case Outline
B
12
0.10 C
Terminal tip (4)
16 x b
D
A
11
9
9
10
10
11
0.10 M C A B
0.05 M C
12
13
8
8
13
14
7
7
14
6
6
15
5
5
E
15
16
1
2
3
4
16
4
Pin #1 identifier (5)
15 x L
0.10 C
Top view
3
2
L1
1
e
Bottom view
0.10 C
C
A
Seating
plane
0.10 C
A3
Side view
DIMENSIONS
MILLIMETERS (1)
INCHES
MIN.
NOM.
MAX.
MIN.
NOM.
MAX.
A
0.50
0.55
0.60
0.020
0.022
0.024
A1
0
-
0.05
0
-
0.002
A3
0.15 ref.
b
0.15
D
2.50
e
0.006 ref.
0.20
0.25
0.006
2.60
2.70
0.098
0.40 BSC
E
1.70
1.80
0.008
0.010
0.102
0.106
0.016 BSC
1.90
0.067
0.071
0.075
L
0.35
0.40
0.45
0.014
0.016
0.018
L1
0.45
0.50
0.55
0.018
0.020
0.022
N (3)
16
16
Nd (3)
4
4
(3)
4
4
Ne
Notes
(1) Use millimeters as the primary measurement.
(2) Dimensioning and tolerances conform to ASME Y14.5M. - 1994.
(3) N is the number of terminals. Nd and Ne is the number of terminals in each D and E site respectively.
(4) Dimensions b applies to plated terminal and is measured between 0.15 mm and 0.30 mm from terminal tip.
(5) The pin 1 identifier must be existed on the top surface of the package by using identification mark or other feature of package body.
(6) Package warpage max. 0.05 mm.
ECN: T16-0226-Rev. B, 09-May-16
DWG: 6023
Revision: 09-May-16
Document Number: 64694
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAD Pattern
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR MINI QFN 16L
0.562
(0.0221)
0.400
(0.0157)
0.225
(0.0089)
1
2.900
(0.1142)
0.463
(0.0182)
1.200
(0.0472)
2.100
(0.0827)
Mounting Footprint
Dimensions in mm (inch)
Document Number: 66557
Revision: 05-Mar-10
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000
工商网监
湘ICP备2023018690号
