ERC55149R00BEEK500

ERC Industrial www.vishay.com Vishay Dale Metal Film Resistors, Axial, Industrial / High Reliability, Precision FEATURES • Same materials and construction as the non-hermetic MIL-PRF-55182 resistors • 100 % stabilization and screening tests. Undergoes group A testing to MIL-PRF-55182 (thermal shock, 1 h overload, short time overload, DC resistance) prior to shipping. • Very low noise (-40 dB) • Controlled temperature coefficient • Epoxy coating provides superior moisture protection • Standard lead is solderable and weldable • Traceability of materials and processing • Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70 °C W POWER RATING P125 °C W MAXIMUM WORKING VOLTAGE (1) V RESISTANCE RANGE  TOLERANCE (2) ±% TEMPERATURE COEFFICIENT ± ppm/°C ERC50..500 0.10 0.05 200 10 to 796K 0.1, 0.5, 1 25, 50, 100 ERC55..500 0.125 0.10 200 10 to 2M 0.1, 0.5, 1 25, 50, 100 ERC55..600 0.25 0.125 250 10 to 3.01M 0.1, 0.5, 1 25, 50, 100 ERC65..500 0.50 0.25 300 10 to 3.01M 0.1, 0.5, 1 25, 50, 100 ERC70..500 0.75 0.50 350 10 to 3.01M 0.1, 0.5, 1 25, 50, 100 GLOBAL MODEL Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Tolerance of ± 0.1 % is available only in 50 ppm and 25 ppm temperature coefficients. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION ppm/V 5/V when measured between 10 % and full rated voltage VAC ERC50-500, ERC55-500 and ERC55-600 = 450; ERC65-500 and ERC70-500 = 900 Insulations Resistance   1011 dry;  109 after moisture test Operating Temperature Range °C -65 to +175 Terminal Strength lb 2 lb pull test on ERC50-500, ERC55-500, ERC55-600 and ERC65-500; 4.5 lb pull test on ERC70-500 Voltage Coefficient, Max. Dielectric Strength Solderability Weight Revision: 16-Sep-16 Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 g ERC50-500 = 0.11; ERC55-500 = 0.35; ERC55-600 = 0.35; ERC65-500 = 0.84; ERC70-500 = 1.06 Document Number: 31104 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERC Industrial www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ERC553K0100FHEA500 (preferred part numbering format) E R GLOBAL MODEL ERC50 ERC55 ERC65 ERC70 C 5 5 3 K 0 1 0 0 F RESISTANCE VALUE TOLERANCE CODE TEMPERATURE COEFFICIENT R= K = k M = M 10R000 = 10  21K500 = 21.5 k 3M0100 = 3.01 M B = ± 0.1 % D = ± 0.5 % F=±1% E = ± 25 ppm H = ± 50 ppm K = ± 100 ppm H E A 5 0 0 PACKAGING SPECIAL EK = lead (Pb)-free, bulk EA = lead (Pb)-free, T/R (full) EB = lead (Pb)-free, T/R (1000 pieces) (dash number) 500 = industrial (all sizes) 600 = industrial (55 only) Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) E (1) A C (Max.) D B Note (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape spacing and lead trim. VISHAY DALE MODEL A B C (MAX.) D E ERC50-500 0.150 ± 0.020 (3.81 ± 0.51) 0.070 ± 0.010 (1.78 ± 0.25) 0.187 (4.75) 0.016 ± 0.002 (0.41 ± 0.05) 1.25 ± 0.266 (31.75 ± 6.76) ERC55-500 0.250 + 0.031 - 0.046 (6.35 + 0.79 - 1.17) 0.094 ± 0.012 (2.39 ± 0.30) 0.300 (7.62) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC55-600 0.280 ± 0.020 (7.11 ± 0.51) 0.097 ± 0.012 (2.46 ± 0.30) 0.350 (8.89) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC65-500 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC70-500 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.032 ± 0.002 (0.81 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) MATERIAL SPECIFICATIONS Element Vacuum-deposited nickel-chrome alloy Core Fire-cleaned high purity ceramic Encapsulation Specially formulated epoxy compound Termination Standard lead material is solder-coated copper. Solderable and weldable per MIL-STD-1276, type C Revision: 16-Sep-16 POWER RATING Power ratings are based on the following two conditions: 1. ± 2.0 % maximum R in 10 000 h load life 2. +175 °C maximum operating temperature APPLICABLE MIL-SPECIFICATIONS MIL-PRF-55182: With the exception of the MIL spec’s 3 % lead (Pb) requirement, the industrial ERC series would meet the electrical, environmental and dimensional requirements of MIL-PRF-55182. Document Number: 31104 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERC Industrial www.vishay.com Vishay Dale 120 ERC50-500 ERC55-500, ERC55-600 100 80 ERC65-500, ERC70-500 60 RATED POWER IN % HEAT RISE (°C ABOVE AMBIENT) Vishay Dale ERC resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the following curve: 120 100 80 60 40 40 20 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W 0 - 65 - 50 - 25 0 25 DERATING 50 75 100 150 175 200 125 AMBIENT TEMPERATURE IN °C MARKING Partial model (for 50 size): C = ERC Tolerance (for 50 size): B = 0.1 %, D = 0.5 %, F = 1 % Temperature coefficient: T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm ERC50-500: (4 lines) C500 33K2 FT1 1548 Partial model and dash number Value Tolerance and TC 4-digit date code Revision: 16-Sep-16 ERC55-500, ERC55-600: (4 lines) 55-500 1.21M 0.5 % T9 1532 Size and dash number Value Tolerance and TC 4-digit date code ERC65-500, ERC70-500: (5 lines) ERC65 -500 7.68K 1 % T2 1516 Full model and size Dash number Value Tolerance and TC 4-digit date code Document Number: 31104 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000