IRF9530

IRF9530 www.vishay.com Vishay Siliconix Power MOSFET FEATURES S • • • • • • • • TO-220AB G G D S D P-Channel MOSFET Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PRODUCT SUMMARY VDS (V) -100 RDS(on) (Ω) VGS = -10 V 0.30 Qg max. (nC) 38 Qgs (nC) 6.8 Qgd (nC) 21 Configuration Dynamic dV/dt rating Available Repetitive avalanche rated P-channel Available 175 °C operating temperature Fast switching Ease of paralleling Simple drive requirements Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION Third generation power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220AB package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 W. The low thermal resistance and low package cost of the TO-220AB contribute to its wide acceptance throughout the industry. Single ORDERING INFORMATION Package TO-220AB Lead (Pb)-free IRF9530PbF Lead (Pb)-free and halogen-free IRF9530PbF-BE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS -100 Gate-source voltage VGS ± 20 VGS at 10 V Continuous drain current Pulsed drain TC = 25 °C TC = 100 °C current a ID IDM Linear derating factor UNIT V - 12 -8.2 A -48 0.59 W/°C mJ Single pulse avalanche energy b EAS 400 Repetitive avalanche current a IAR -12 A Repetitive avalanche energy a EAR 8.8 mJ Maximum power dissipation TC = 25 °C Peak diode recovery dV/dt c Operating junction and storage temperature range Soldering recommendations (peak temperature) Mounting torque d For 10 s 6-32 or M3 screw PD 88 W dV/dt - 5.5 V/ns TJ, Tstg -55 to +175 300 °C 10 lbf · in 1.1 N·m Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. VDD = -25 V, starting TJ = 25 °C, L = 4.2 mH, Rg = 25 Ω, IAS = -12 A (see fig. 12) c. ISD ≤ -12 A, dI/dt ≤ 140 A/μs, VDD ≤ VDS, TJ ≤ 175 °C d. 1.6 mm from case S21-0852-Rev. D, 16-Aug-2021 Document Number: 91076 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9530 www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum junction-to-ambient RthJA - 62 Case-to-sink, flat, greased surface RthCS 0.50 - Maximum junction-to-case (drain) RthJC - 1.7 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage VDS temperature coefficient Gate-source threshold voltage VDS VGS = 0 V, ID = -250 μA -100 - - V ΔVDS/TJ Reference to 25 °C, ID = -1 mA - -0.10 - V/°C VGS(th) VDS = VGS, ID = -250 μA -2.0 - -4.0 V Gate-source leakage IGSS VGS = ± 20 V - - ± 100 nA Zero gate voltage drain current IDSS Drain-source on-state resistance Forward transconductance RDS(on) gfs VDS = -100 V, VGS = 0 V - - -100 VDS = -80 V, VGS = 0 V, TJ = 150 °C - - -500 - - 0.30 Ω 3.7 - - S ID = -7.2 A b VGS = -10 V VDS = -50 V, ID = -7.2 Ab μA Dynamic Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd Turn-on delay time Rise time Turn-off delay time Fall time - 860 - - 340 - pF - 93 - - - 38 - - 6.8 - - 21 td(on) - 12 - tr - 52 - - 31 - - 39 - - 4.5 - - 7.5 - 0.4 - 3.3 - - -12 S - - -48 TJ = 25 °C, IS = -12 A, VGS = 0 V b - - -6.3 V - 120 240 ns - 0.46 0.92 μC td(off) VGS = -10 V ID = -12 A, VDS = -80 V, see fig. 6 and 13 b VDD = -50 V, ID = -12 A, Rg = 12 Ω,RD = 3.9 Ω, see fig. 10 b tf Gate input resistance LD Internal drain inductance LS Internal source inductance VGS = 0 V, VDS = -25 V, f = 1.0 MHz, see fig. 5 Rg Between lead, 6 mm (0.25") from package and center of die contact D nC ns nH G S f = 1 MHz, open drain Ω Drain-Source Body Diode Characteristics Continuous source-drain diode current IS Pulsed diode forward current a ISM Body diode voltage VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Forward turn-on time ton MOSFET symbol showing the integral reverse p -n junction diode D A G TJ = 25 °C, IF = -12 A, dI/dt = 100 A/μs b Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. Pulse width ≤ 300 μs; duty cycle ≤ 2 % S21-0852-Rev. D, 16-Aug-2021 Document Number: 91076 2 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9530 www.vishay.com Vishay Siliconix VGS - 15 V - 10 V - 8.0 V - 7.0 V - 6.0 V - 5.5 V - 5.0 V Bottom - 4.5 V - ID, Drain Current (A) Top 101 - 4.5 V 20 µs Pulse Width TC = 25 °C 100 10-1 100 101 - VDS, Drain-to-Source Voltage (V) 91076_01 RDS(on), Drain-to-Source On Resistance (Normalized) TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 - 60- 40 - 20 0 - 4.5 V 100 Ciss 900 600 Coss 300 Crss 0 101 100 - VDS, Drain-to-Source Voltage (V) 91076_02 1200 20 µs Pulse Width TC = 175 °C 100 10-1 VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd 1500 Capacitance (pF) - ID, Drain Current (A) Bottom Fig. 4 - Normalized On-Resistance vs. Temperature 1800 VGS - 15 V - 10 V - 8.0 V - 7.0 V - 6.0 V - 5.5 V - 5.0 V - 4.5 V 101 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage - ID, Drain Current (A) 175 °C 101 20 µs Pulse Width VDS = - 50 V 100 - VGS, Gate-to-Source Voltage (V) 20 25 °C 101 - VDS, Drain-to-Source Voltage (V) 91076_05 Fig. 2 - Typical Output Characteristics, TC = 175 °C ID = - 12 A 16 VDS = - 80 V VDS = - 50 V 12 VDS = - 20 V 8 4 For test circuit see figure 13 0 4 91076_03 20 40 60 80 100 120 140 160 180 TJ, Junction Temperature (°C) 91076_04 Fig. 1 -Typical Output Characteristics, TC = 25 °C Top ID = - 12 A VGS = - 10 V 5 6 7 8 9 10 - VGS, Gate-to-Source Voltage (V) Fig. 3 - Typical Transfer Characteristics S21-0852-Rev. D, 16-Aug-2021 0 91076_06 10 20 30 40 50 QG, Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Document Number: 91076 3 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9530 www.vishay.com Vishay Siliconix - ISD, Reverse Drain Current (A) 12 - ID, Drain Current (A) 10 175 °C 101 25 °C 100 8 6 4 2 VGS = 0 V 10-1 0 1.0 2.0 3.0 5.0 4.0 - VSD, Source-to-Drain Voltage (V) 91076_07 75 100 125 150 175 TC, Case Temperature (°C) 91076_09 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 9 - Maximum Drain Current vs. Case Temperature RD 103 VDS Operation in this area limited by RDS(on) 5 2 - ID, Drain Current (A) 50 25 VGS 102 D.U.T. RG 5 10 µs 2 100 µs + - VDD - 10 V 10 1 ms 5 Pulse width ≤ 1 µs Duty factor ≤ 0.1 % 10 ms 2 1 Fig. 10 - Switching Time Test Circuit 5 TC = 25 °C TJ = 175 °C Single Pulse 2 0.1 0.1 2 5 1 2 5 10 2 td(on) 5 2 102 5 td(off) tf tr VGS 103 10 % - VDS, Drain-to-Source Voltage (V) 91076_08 Fig. 8 - Maximum Safe Operating Area 90 % VDS Fig. 11 - Switching Time Waveforms Thermal Response (ZthJC) 10 1 D = 0.5 0.2 PDM 0.1 0.1 0.05 t1 Single Pulse (Thermal Response) 0.02 0.01 t2 Notes: 1. Duty Factor, D = t1/t2 2. Peak Tj = PDM x ZthJC + TC 10-2 10-5 10-4 10-3 10-2 0.1 1 10 t1, Rectangular Pulse Duration (s) 91076_11 Fig. 12 - Maximum Effective Transient Thermal Impedance, Junction-to-Case S21-0852-Rev. D, 16-Aug-2021 Document Number: 91076 4 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9530 www.vishay.com Vishay Siliconix L Vary tp to obtain required IAS IAS VDS VDS D.U.T RG + V DD VDD IAS tp - 10 V A 0.01 Ω tp VDS Fig. 13 - Unclamped Inductive Test Circuit Fig. 14 - Unclamped Inductive Waveforms EAS, Single Pulse Energy (mJ) 1200 ID - 4.9 A - 8.5 A Bottom - 12 A Top 1000 800 600 400 200 VDD = - 25 V 0 25 91076_12c 50 75 100 125 150 175 Starting TJ, Junction Temperature (°C) Fig. 15 - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG - 10 V 12 V 0.2 µF 0.3 µF QGS - QGD D.U.T. VG + VDS VGS - 3 mA Charge IG ID Current sampling resistors Fig. 16 - Basic Gate Charge Waveform S21-0852-Rev. D, 16-Aug-2021 Fig. 17 - Gate Charge Test Circuit Document Number: 91076 5 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF9530 www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit D.U.T. + Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + + - - Rg • dV/dt controlled by Rg • ISD controlled by duty factor “D” • D.U.T. - device under test + - VDD Note • Compliment N-Channel of D.U.T. for driver Driver gate drive P.W. Period D= P.W. Period VGS = - 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple ≤ 5 % ISD Note a. VGS = - 5 V for logic level and - 3 V drive devices Fig. 18 - For P-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91076. S21-0852-Rev. D, 16-Aug-2021 Document Number: 91076 6 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-220-1 A E F D H(1) Q ØP 3 2 L(1) 1 M* L b(1) C b e J(1) e(1) MILLIMETERS DIM. INCHES MIN. MAX. MIN. MAX. A 4.24 4.65 0.167 0.183 b 0.69 1.02 0.027 0.040 b(1) 1.14 1.78 0.045 0.070 c 0.36 0.61 0.014 0.024 D 14.33 15.85 0.564 0.624 E 9.96 10.52 0.392 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.10 6.71 0.240 0.264 J(1) 2.41 2.92 0.095 0.115 L 13.36 14.40 0.526 0.567 L(1) 3.33 4.04 0.131 0.159 ØP 3.53 3.94 0.139 0.155 Q 2.54 3.00 0.100 0.118 ECN: E21-0621-Rev. D, 04-Nov-2021 DWG: 6031 Note • M* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for HVM Document Number: 66542 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revison: 04-Nov-2021 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000