K3011P

Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing, 250 VDRM FEATURES A 1 6 MT2 C 2 5 NC • 250 V blocking voltage • Wide range of trigger current • 100 mARMS on-state current • Wide temperature range -55 °C to +100 °C 4 MT1 NC 3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 22897-1 APPLICATIONS LINKS TO ADDITIONAL RESOURCES • Power TRIAC driver 3D 3D 3D Models • Isolated AC load switch Design Tools Related Documents Models • Air condition Footprints • Heaters • White goods Schematics • Industrial controls DESCRIPTION • Office equipment The K301xP series consists of a phototriac optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. AGENCY APPROVALS The non-zero crossing functionality enables full wave control. Featuring galvanic and electrical noise isolation, the output is able to directly switch AC loads or drive medium to high power TRIACs. • cUL • UL • DIN EN 60747-5-5 (VDE 0884-5) • CQC: GB4943-1-2011 • CQC: GB8898-2011 • FIMKO ORDERING INFORMATION K 3 0 1 X TRIGGER CURRENT IFT PART NUMBER AGENCY CERTIFIED / PACKAGE 7.62 mm TRIGGER CURRENT, IFT VDE, cUL, CQC, FIMKO DIP-6 DIP-6 P 5 mA 15 mA K3012P K3010P Note • Additional options may be possible, please contact sales office Document Number: 83504 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 5 V Forward current IF 80 mA Forward surge current tp ≤ 10 μs IFSM 3 A Pdiss 100 mW Tj 125 °C Off state output terminal voltage VDRM 250 V On state RMS current ITRM 100 mA Power dissipation Junction temperature OUTPUT Peak surge current, non-repetitive tp ≤ 10 ms Power dissipation ITMS 1.5 A Pdiss 300 mW Tj 125 °C Junction temperature COUPLER Total power dissipation Ptot 350 mW Storage temperature range Tstg -55 to +150 °C Ambient temperature range Tamb -55 to +100 °C Tsld 260 °C Soldering temperature 2 mm from case, t ≤ 10 s Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 50 mA VF - 1.25 1.6 V VR = 0, f = 1 MHz Cj - 50 - pF Forward peak off-state voltage (repetitive) IRDM = 100 nA VDRM (1) 250 - - V Peak on-state voltage ITM = 100 mA Junction capacitance OUTPUT Critical rate of rise of off-state voltage VTM - 1.5 3 V dV/dtcr - 10 - V/μs dV/dtcrq 0.1 0.2 - V/μs K3010P IFT - 8 15 mA K3012P IFT - 2 5 mA IH - 100 - μA IFT = 0, IFT = 30 mA COUPLER (2) Collector emitter trigger current VS = 3 V, RL = 150 Ω Holding current IF = 10 mA, VS ≥ 3 V Notes • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements (1) Test voltage must be applied within dV/dt ratings (2) I FT is defined as a minimum trigger current Document Number: 83504 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors RS Test condition: dV/dt cr VS = 2/3 VDRM (sine wave) R L = 33 kΩ V~ I FT dV/dt crq Veff. = 30 V RL (sine wave) R L = 2 kΩ 95 10813 Fig. 1 - Test Circuit for dV/dtcr and dV/dtcrq I F ≥ I FT IF = 0 dV/dt crq dV/dt cr dV/dt crq 95 10814 dV/dt cr Highest value of the “rate of rise of off-state voltage” which does not cause any switching from the off state to the on state Highest value of the “rate of rise of communicating voltage” which does not switch on the device again, after the voltage has decreased to zero and the trigger current is switched from I FT to zero Fig. 2 SAFETY AND INSULATION RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index Maximum rated withstanding isolation voltage SYMBOL VALUE UNIT 55 / 100 / 21 2 Insulation group IIIa CTI 175 According to UL1577, t = 1 min VISO 4420 VRMS VRMS Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak Tamb = 25 °C, VIO = 500 V RIO ≥ 1012 Ω Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 Ω PSO 265 mW Input safety current ISI 130 mA Input safety temperature TS 150 °C ≥7 mm Isolation resistance Output safety power Creepage distance Clearance distance DIP-6 Insulation thickness Input to output test voltage, method A VIORM x 1.6 = VPR, 100 % sample test with tM = 10 s, partial discharge < 5 pC ≥7 mm DTI ≥ 0.4 mm VPR 1424 Vpeak Note • According to DIN EN60747-5-5 (see figure 4). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits Document Number: 83504 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors VIOTM 300 Psi (mW) t1, t2 t3 , t4 ttest tstres Max. Safety Ratings 250 200 = 1 s to 10 s =1s = 10 s = 12 s Vpd 150 VIOWM VIORM Isi (mA) 100 50 0 0 0 25 50 75 100 125 t3 ttest t4 150 t1 13930 Tamb - Ambient Temperature (°C) tTr = 60 s t2 t stres t Fig. 3 - Safety Parameter Derating Diagram Fig. 4 - Test Pulse Diagram for Sample Test according to DIN EN60747-5-5 / DIN EN60747-; IEC 60747 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10000 Output 300 1000 1st line 2nd line 2nd line Pdiss - Power Dissipation (mW) Total 200 100 Input 100 I FTrel - Relative Threshold Forward Current Axis Title 400 10 0 -60 -40 -20 0 20 40 60 1.5 1.4 1.3 VS = 3 V R L = 150  1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -30 -20 -10 0 10 20 30 40 50 60 70 80 80 100 120 Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C) Fig. 5 - Total Power Dissipation vs. Ambient Temperature Fig. 7 - Relative Threshold Forward Current vs. Ambient Temperature 1.5 VTMrel - Relative On-State Voltage IF - Forward Current (mA) 1000 100 10 1 0.1 0 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage 1.4 1.3 1.2 IF = I FT I T = 100 mA 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -30 -20 -10 0 10 20 30 40 50 60 70 80 Tamb - Ambient Temperature (°C) Fig. 8 - Relative On-State vs. Ambient Temperature Document Number: 83504 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors 100 250 I TM - On-State Current (mA) I DRM - Off-State Current (nA) 200 V DR = 100 V IF = 0 10 150 I FT = 15 mA 100 50 0 - 50 - 100 - 150 - 200 1 20 - 250 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) V TM - On-State Voltage (V) Fig. 9 - Off-State Current vs. Ambient Temperature Fig. 10 - On-State Current vs. On-State Voltage PACKAGE DIMENSIONS (in millimeters) DIP-6 9.00 max. 7.62 typ. 8.60 ± 0.10 6.50 ± 0.25 0.79 min. 3.10 ± 0.50 3.55 ± 0.25 0.90 min. 0.85 ± 0.10 0.50 ± 0.10 3° to 9° 0.25 ± 0.10 1.27 ± 0.10 2.54 typ. 6 5 4 1 2 3 Pin one I.D. Document Number: 83504 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors PACKAGE MARKING K3010P V YWW 68 Fig. 11 - Example of K3010P Notes • “YWW” is the date code marking (Y = year code, WW = week code) • The VDE logo is only marked on option1 parts PACKING INFORMATION (in millimeters) Tube 528 ± 0.2 330 ± 0.5 260 ± 0.5 200 ± 0.5 150 ± 0.5 125 ± 0.5 – 1.0 30 ± 0.5 B VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC Detail B Detail A A – 1.0 – 1.0 3 ± 0.5 – 1.0 380 ± 1 0.7 ± 0.5 1.0 14 x 13 x 10 = 130 17996-3 Fig. 12 - Shipping Tube Specifications for DIP Packages DEVICES PER TUBES TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-6 50 40 2000 DIP-6 12 ± 0.3 B 6.6 ± 0.3 Transparent rigid PVC 2.7 ± 0.2 R 0. 1 6° 4.4 ± 0.3 0. 5 11 ± 0.3 R 0.6 ± 0.1 10° A // 0.2 B Detail A Detail B 5.7 ± 0.15 17996-4 Section A - B Not to scale Fig. 13 - Tube Shipping Medium Document Number: 83504 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Not for New Designs - Alternative Device: VO3021, VO3022, VO3023 K3010P, K3012P www.vishay.com Vishay Semiconductors SOLDER PROFILES Axis Title Axis Title 10000 5s 10000 300 Lead temperature 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 100 °C to 130 °C 100 100 2 K/s 50 2nd line Temperature (°C) 200 Max. 260 °C 10 100 150 200 Max. 30 s 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 °C/s 100 Max. ramp up 3 °C/s Fig. 14 - Wave Soldering Double Wave Profile According to J-STD-020 for DIP Devices 10 0 0 250 Time (s) 948626 1000 200 50 0 50 245 °C ca. 5 K/s Forced cooling 0 255 °C 240 °C 217 °C 250 235 °C to 260 °C First wave 1st line 2nd line 2nd line Temperature (°C) 250 1st line 2nd line 300 19841 50 100 150 200 250 300 Time (s) Fig. 15 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for SMD Devices HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 Document Number: 83504 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 06-Oct-2022 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000