M39003/09
www.vishay.com
Vishay
Solid-Electrolyte TANTALEX™ Capacitors,
Military MIL-PRF-39003/09 Qualified, Style CSR21
FEATURES
•
•
•
•
•
•
•
•
Hermetically sealed
Metal cased
Axial lead
Weibull failure rates B, C, D
Exponential failure rates M, P, R, S
Low ESR
100 % surge current test
Tape and reel available per EIA-296 standard
PERFORMANCE CHARACTERISTICS
STYLE, MILITARY SPECIFICATION SHEET
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 5.6 μF to 330 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 6 VDC to 50 VDC
Style CSR21, M39003/09
MIL-PRF-39003/9
DESCRIPTION
Solid-electrolyte
TANTALEX
capacitors
to
military
specification MIL-PRF-39003 - Exponential and Weibull
Distribution: hermetically sealed, metal cased, axial leaded
tubular capacitors manufactured as military style CSR21.
These capacitors are furnished to the requirements of the
military specification, including marking, testing and
inspection.
In accordance with the specification, all capacitors are
marked with the military part number (M39003/xx-xxxx)
rather than the older style designation (CSRxxxxxxxx) and
should be ordered as such. All capacitors covered by
MIL-PRF-39003 are now ordered with the military part
number as illustrated in the Part Numbering System chart.
Capacitors must not be ordered using the style number
identification.
MIL-PRF-39003 establishes failure rates (expressed in
percent per 1000 h) based on exponential and Weibull
distribution. Care must be exercised in ordering to insure the
part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21,
CSR23 capacitors requiring government inspection must
state whether inspection is to be at the destination or at the
Vishay plant. Orders requiring source inspection cannot be
shipped until this has been accomplished.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the military
specification.
ORDERING INFORMATION
M39003
/09
-2085
B
/TR
BASIC
DOCUMENT NUMBER
SLASH SHEET
DASH NUMBER
SURGE CURRENT
OPTION LETTER
PACKAGING OPTION (1)
Indicates the Basic
Specification; in this
case MIL-PRF-39003
Indicates the
Specification Sheet
of the Basic Military
Specification
Taken from Ratings
table of the
Specification Sheet
Blank = standard, +25 °C,
after Weibull
B = -55 °C and +85 °C,
after Weibull
C = -55 °C and +85 °C,
before Weibull
E = -55 °C and +85 °C,
after Weibull, high
temperature solder
F = -55 °C and +85 °C,
before Weibull, high
temperature solder
H = +25 °C, after Weibull,
high temperature solder
Blank = bulk
/TR = tape and reel, full reel
/HR = tape and reel, half reel
/PR = tape and reel, partial reel
/RR = tape and reel,
option R, full reel
/WR = tape and reel,
option W, full reel
Note
(1) See detailed packaging information following the Standard Ratings table
Revision: 15-Dec-2021
Document Number: 40158
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39003/09
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
J
D
1.500 ± 0.250
[38.10 ± 6.35]
M
0.094 [2.4]
Max.
L
CASE CODE
L
± 0.031 [0.79]
D
+ 0.016 [0.41]
- 0.015 [0.38]
M
± 0.002 [0.05]
J
(MAX.)
C
0.686 [17.42]
0.289 [7.34]
0.025 [0.64]
0.822 [20.88]
D
0.786 [19.96]
0.351 [8.92]
0.025 [0.64]
0.922 [23.42]
Notes
• Capacitors of this series are supplied with shrink-fitted insulation sleeve. The insulation sleeve laps over the ends of the capacitor body,
extending by 0.015" [0.38 mm] minimum beyond each end. Dimensions L and D include insulation sleeve additives. Dimension J is always
larger than L and is not affected by insulation sleeve
• A minimum lead length of 1.0" [25.4 mm] for use with tape and reel automatic insertion equipment is available upon request
RATINGS AND CASE CODES
μF
6V
10 V
15 V
20 V
35 V
50 V
5.6
C
6.8
C
8.2
C
10
C
12
C
15
C
18
C
22
C
27
C
D
33
C
D
39
C
D
47
C
D
56
68
C
D
C
D
82
C
D
100
C
D
120
C
150
C
180
C
220
D
D
D
D
270
D
330
D
Revision: 15-Dec-2021
D
Document Number: 40158
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39003/09
www.vishay.com
Vishay
STANDARD RATINGS
CAP.
CAPACITANCE CASE
TOL.
(μF)
CODE
(± %)
PART NO. M39003/09FAILURE RATE LEVEL (%/1000 h)
M
1.0
P
R
S
B
C
D
0.1 0.01 0.001 0.1 0.01 0.001
DERATED
MAX. RIPPLE
MAX.
MAX.
CURRENT
MAX. DCL (μA) AT
DF AT ESR AT
AT +25 °C
+25 °C +25 °C
(A)
1 kHz 100 kHz
(Ω)
(%)
+25 °C +85 °C +125 °C
40 kHz 1 kHz
6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C
150
C
5
0001 0101 0201 0301 2001 3001 4001
4.5
90.0
113
10
0.065
3.3
2.0
150
C
10
0002 0102 0202 0302 2002 3002 4002
4.5
90.0
113
10
0.065
3.3
2.0
150
C
20
0003 0103 0203 0303 2003 3003 4003
4.5
90.0
113
10
0.065
3.3
2.0
180
C
5
0004 0104 0204 0304 2004 3004 4004
5.5
110
138
10
0.060
3.4
2.4
180
C
10
0005 0105 0205 0305 2005 3005 4005
5.5
110
138
10
0.060
3.4
2.4
270
D
5
0006 0106 0206 0306 2006 3006 4006
6.5
130
163
10
0.050
4.1
3.4
270
D
10
0007 0107 0207 0307 2007 3007 4007
6.5
130
163
10
0.050
4.1
3.4
330
D
5
0008 0108 0208 0308 2008 3008 4008
7.5
150
188
12
0.045
4.3
3.8
330
D
10
0009 0109 0209 0309 2009 3009 4009
7.5
150
188
12
0.045
4.3
3.8
330
D
20
0010 0110 0210 0310 2010 3010 4010
7.5
150
188
12
0.045
4.3
3.8
1.8
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C
82
C
5
0011 0111 0211 0311 2011 3011 4011
4.0
80.0
100
8
0.085
2.9
82
C
10
0012 0112 0212 0312 2012 3012 4012
4.0
80.0
100
8
0.085
2.9
1.8
100
C
5
0013 0113 0213 0313 2013 3013 4013
5.0
100
125
8
0.075
3.0
2.2
100
C
10
0014 0114 0214 0314 2014 3014 4014
5.0
100
125
8
0.075
3.0
2.2
100
C
20
0015 0115 0215 0315 2015 3015 4015
5.0
100
125
8
0.075
3.0
2.2
120
C
5
0016 0116 0216 0136 2016 3016 4016
6.0
120
150
8
0.070
3.2
2.5
120
C
10
0017 0117 0217 0317 2017 3017 4017
6.0
120
150
8
0.070
3.2
2.5
180
D
5
0018 0118 0218 0318 2018 3018 4018
9.0
180
226
8
0.060
3.7
3.4
180
D
10
0019 0119 0219 0319 2019 3019 4019
9.0
180
226
8
0.060
3.7
3.4
220
D
5
0020 0120 0220 0320 2020 3020 4020
10.0
200
250
10
0.055
3.9
3.4
220
D
10
0021 0121 0221 0321 2021 3021 4021
10.0
200
250
10
0.055
3.9
3.4
220
D
20
0022 0122 0222 0322 2022 3022 4022
10.0
200
250
10
0.055
3.9
3.4
6
0.100
2.6
1.8
15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C
56
C
5
0023 0123 0223 0323 2023 3023 4023
4.0
80.0
100
56
C
10
0024 0124 0224 0324 2024 3024 4024
4.0
80.0
100
6
0.100
2.6
1.8
68
C
5
0025 0125 0225 0325 2025 3025 4025
5.0
100
125
6
0.095
2.7
2.2
68
C
10
0026 0126 0226 0326 2026 3026 4026
5.0
100
125
6
0.095
2.7
2.2
68
C
20
0027 0127 0227 0327 2027 3027 4027
5.0
100
125
6
0.095
2.7
2.2
120
D
5
0028 0128 0228 0328 2028 3028 4028
9.0
180
226
8
0.070
3.5
2.8
120
D
10
0029 0129 0229 0329 2029 3029 4029
9.0
180
226
8
0.070
3.5
2.8
150
D
5
0030 0130 0230 0330 2030 3030 4030
10.0
200
250
8
0.065
3.6
3.1
150
D
10
0031 0131 0231 0331 2031 3031 4031
10.0
200
250
8
0.065
3.6
3.1
150
D
20
0032 0132 0232 0332 2032 3032 4032
10.0
200
250
8
0.065
3.6
3.1
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C
27
C
5
0033 0133 0233 0333 2033 3033 4033
2.5
50.0
63.0
5
0.145
2.2
1.2
27
C
10
0034 0134 0234 0334 2034 3034 4034
2.5
50.0
63.0
5
0.145
2.2
1.2
33
C
5
0035 0135 0235 0335 2035 3035 4035
3.5
70.0
88.0
5
0.130
2.3
1.4
33
C
10
0036 0136 0236 0336 2036 3036 4036
3.5
70.0
88.0
5
0.130
2.3
1.4
33
C
20
0037 0137 0237 0337 2037 3037 4037
3.5
70.0
88.0
5
0.130
2.3
1.4
39
C
5
0038 0138 0238 0338 2038 3038 4038
4.0
80.0
100
5
0.120
2.4
1.7
39
C
10
0039 0139 0239 0339 2039 3039 4039
4.0
80.0
100
5
0.120
2.4
1.7
47
C
5
0040 0140 0240 0340 2040 3040 4040
4.5
90.0
113
6
0.110
2.5
1.8
Revision: 15-Dec-2021
Document Number: 40158
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39003/09
www.vishay.com
Vishay
STANDARD RATINGS
CAP.
CAPACITANCE CASE
TOL.
(μF)
CODE
(± %)
PART NO. M39003/09FAILURE RATE LEVEL (%/1000 h)
M
1.0
P
R
S
B
C
D
0.1 0.01 0.001 0.1 0.01 0.001
DERATED
MAX. RIPPLE
MAX.
MAX.
CURRENT
MAX. DCL (μA) AT
DF AT ESR AT
AT +25 °C
+25 °C +25 °C
(A)
1 kHz 100 kHz
(Ω)
(%)
+25 °C +85 °C +125 °C
40 kHz 1 kHz
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C
47
47
56
56
68
68
68
82
82
100
100
100
C
C
D
D
D
D
D
D
D
D
D
D
10
20
5
10
5
10
20
5
10
5
10
20
0041
0042
0043
0044
0045
0046
0047
0048
0049
0050
0051
0052
0141
0142
0143
0144
0145
0146
0147
0148
0149
0150
0151
0152
22
22
22
27
27
33
33
33
39
39
47
47
47
C
C
C
D
D
D
D
D
D
D
D
D
D
5
10
20
5
10
5
10
20
5
10
5
10
20
0053
0054
0055
0056
0057
0058
0059
0060
0061
0062
0063
0064
0065
0153
0154
0155
0156
0157
0158
0159
0160
0161
0162
0163
0164
0165
5.6
5.6
6.8
6.8
6.8
8.2
8.2
10
10
10
12
12
15
15
15
18
18
22
22
22
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
5
10
5
10
20
5
10
5
10
20
5
10
5
10
20
5
10
5
10
20
0066
0067
0068
0069
0070
0071
0072
0073
0074
0075
0076
0077
0078
0079
0080
0081
0082
0083
0084
0085
0166
0167
0168
0169
0170
0171
0172
0173
0174
0175
0176
0177
0178
0179
0180
0181
0182
0183
0184
0185
0241
0242
0243
0244
0245
0246
0247
0248
0249
0250
0251
0252
0341
0342
0343
0344
0345
0346
0347
0348
0349
0350
0351
0352
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4.5
4.5
5.5
5.5
7.0
7.0
7.0
8.0
8.0
10.0
10.0
10.0
90.0
90.0
110
110
140
140
140
160
160
200
200
200
113
113
138
138
175
175
175
200
200
250
250
250
6
6
6
6
6
6
6
6
6
8
8
8
0.110
0.110
0.100
0.100
0.095
0.095
0.095
0.085
0.085
0.075
0.075
0.075
2.5
2.5
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.3
3.3
3.3
1.8
1.8
2.2
2.2
2.4
2.4
2.4
2.5
2.5
2.5
2.5
2.5
4
4
4
4
4
5
5
5
5
5
5
5
5
0.160
0.160
0.160
0.145
0.145
0.130
0.130
0.130
0.120
0.120
0.110
0.110
0.110
2.1
2.1
2.1
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.7
2.7
2.7
1.5
1.5
1.5
1.9
1.9
1.9
1.9
1.9
2.0
2.0
2.2
2.2
2.2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
0.300
0.300
0.275
0.275
0.275
0.250
0.250
0.230
0.230
0.230
0.210
0.210
0.190
0.190
0.190
0.175
0.175
0.160
0.160
0.160
1.5
1.5
1.6
1.6
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.3
2.3
2.3
0.6
0.6
0.7
0.7
0.7
0.9
0.9
1.1
1.1
1.1
1.3
1.3
1.4
1.4
1.4
1.4
1.4
1.7
1.7
1.7
35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C
0253
0254
0255
0256
0257
0258
0259
0260
0261
0262
0263
0264
0265
0353
0354
0355
0356
0357
0358
0359
0360
0361
0362
0363
0364
0365
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4.0
4.0
4.0
4.5
4.5
5.5
5.5
5.5
7.0
7.0
8.0
8.0
8.0
80.0
80.0
80.0
90.0
90.0
110
110
110
140
140
160
160
160
100
100
100
113
113
138
138
138
175
175
200
200
200
50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C
Revision: 15-Dec-2021
0266
0267
0268
0269
0270
0271
0272
0273
0274
0275
0276
0277
0278
0279
0280
0281
0282
0283
0284
0285
0366
0367
0368
0369
0370
0371
0372
0373
0374
0375
0376
0377
0378
0379
0380
0381
0382
0383
0384
0385
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
4066
4067
4068
4069
4070
4071
4072
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.5
2.5
3.0
3.0
4.0
4.0
4.0
4.5
4.5
5.5
5.5
5.5
45.0
45.0
45.0
45.0
45.0
50.0
50.0
50.0
50.0
50.0
60.0
60.0
80.0
80.0
80.0
90.0
90.0
110
110
110
56.0
56.0
56.0
56.0
56.0
63.0
63.0
63.0
63.0
63.0
75.0
75.0
100
100
100
113
113
138
138
138
Document Number: 40158
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39003/09
www.vishay.com
Vishay
STANDARD PACKAGING QUANTITY
QUANTITY (pcs/reel)
CASE CODE
FULL REEL
/TR; /RR; /WR
HALF REEL
/HR
BULK QUANTITY
PARTIAL REEL
/PR
PER TRAY
PER BOX
C
500
250
100
20
100
D
500
250
100
20
80
INSIDE TAPE SPACING
PACKAGING OPTION
CASE CODE
TAPE SPACING
/TR; /HR; /PR
C, D
2.88 ± 0.02
[73.0 ± 0.51]
/RR
C, D
2.47 ± 0.02
[62.7 ± 0.51]
/WR
C, D
2.05 ± 0.02
[52.1 ± 0.51]
PRODUCT INFORMATION
Quick Reference Guide
www.vishay.com/doc?40037
Selector Guide
www.vishay.com/doc?49054
Parameter Comparison Guide
www.vishay.com/doc?40033
Mounting of Through-Hole Components
www.vishay.com/doc?40108
Frequently Asked Questions
www.vishay.com/doc?40110
Solid Tantalum Capacitors (With MnO2 Electrolyte) Voltage Derating
www.vishay.com/doc?40246
Revision: 15-Dec-2021
Document Number: 40158
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000