M39003/09-0358

M39003/09 www.vishay.com Vishay Solid-Electrolyte TANTALEX™ Capacitors, Military MIL-PRF-39003/09 Qualified, Style CSR21 FEATURES • • • • • • • • Hermetically sealed Metal cased Axial lead Weibull failure rates B, C, D Exponential failure rates M, P, R, S Low ESR 100 % surge current test Tape and reel available per EIA-296 standard PERFORMANCE CHARACTERISTICS STYLE, MILITARY SPECIFICATION SHEET Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 5.6 μF to 330 μF Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 % Voltage Rating: 6 VDC to 50 VDC Style CSR21, M39003/09 MIL-PRF-39003/9 DESCRIPTION Solid-electrolyte TANTALEX capacitors to military specification MIL-PRF-39003 - Exponential and Weibull Distribution: hermetically sealed, metal cased, axial leaded tubular capacitors manufactured as military style CSR21. These capacitors are furnished to the requirements of the military specification, including marking, testing and inspection. In accordance with the specification, all capacitors are marked with the military part number (M39003/xx-xxxx) rather than the older style designation (CSRxxxxxxxx) and should be ordered as such. All capacitors covered by MIL-PRF-39003 are now ordered with the military part number as illustrated in the Part Numbering System chart. Capacitors must not be ordered using the style number identification. MIL-PRF-39003 establishes failure rates (expressed in percent per 1000 h) based on exponential and Weibull distribution. Care must be exercised in ordering to insure the part number correctly identifies the desired failure rate level. In addition, each order for military style CSR13, CSR21, CSR23 capacitors requiring government inspection must state whether inspection is to be at the destination or at the Vishay plant. Orders requiring source inspection cannot be shipped until this has been accomplished. For information on the performance characteristics of these capacitors, please refer to the latest issue of the military specification. ORDERING INFORMATION M39003 /09 -2085 B /TR BASIC DOCUMENT NUMBER SLASH SHEET DASH NUMBER SURGE CURRENT OPTION LETTER PACKAGING OPTION (1) Indicates the Basic Specification; in this case MIL-PRF-39003 Indicates the Specification Sheet of the Basic Military Specification Taken from Ratings table of the Specification Sheet Blank = standard, +25 °C, after Weibull B = -55 °C and +85 °C, after Weibull C = -55 °C and +85 °C, before Weibull E = -55 °C and +85 °C, after Weibull, high temperature solder F = -55 °C and +85 °C, before Weibull, high temperature solder H = +25 °C, after Weibull, high temperature solder Blank = bulk /TR = tape and reel, full reel /HR = tape and reel, half reel /PR = tape and reel, partial reel /RR = tape and reel, option R, full reel /WR = tape and reel, option W, full reel Note (1) See detailed packaging information following the Standard Ratings table Revision: 15-Dec-2021 Document Number: 40158 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39003/09 www.vishay.com Vishay DIMENSIONS in inches [millimeters] J D 1.500 ± 0.250 [38.10 ± 6.35] M 0.094 [2.4] Max. L CASE CODE L ± 0.031 [0.79] D + 0.016 [0.41] - 0.015 [0.38] M ± 0.002 [0.05] J (MAX.) C 0.686 [17.42] 0.289 [7.34] 0.025 [0.64] 0.822 [20.88] D 0.786 [19.96] 0.351 [8.92] 0.025 [0.64] 0.922 [23.42] Notes • Capacitors of this series are supplied with shrink-fitted insulation sleeve. The insulation sleeve laps over the ends of the capacitor body, extending by 0.015" [0.38 mm] minimum beyond each end. Dimensions L and D include insulation sleeve additives. Dimension J is always larger than L and is not affected by insulation sleeve • A minimum lead length of 1.0" [25.4 mm] for use with tape and reel automatic insertion equipment is available upon request RATINGS AND CASE CODES μF 6V 10 V 15 V 20 V 35 V 50 V 5.6 C 6.8 C 8.2 C 10 C 12 C 15 C 18 C 22 C 27 C D 33 C D 39 C D 47 C D 56 68 C D C D 82 C D 100 C D 120 C 150 C 180 C 220 D D D D 270 D 330 D Revision: 15-Dec-2021 D Document Number: 40158 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39003/09 www.vishay.com Vishay STANDARD RATINGS CAP. CAPACITANCE CASE TOL. (μF) CODE (± %) PART NO. M39003/09FAILURE RATE LEVEL (%/1000 h) M 1.0 P R S B C D 0.1 0.01 0.001 0.1 0.01 0.001 DERATED MAX. RIPPLE MAX. MAX. CURRENT MAX. DCL (μA) AT DF AT ESR AT AT +25 °C +25 °C +25 °C (A) 1 kHz 100 kHz (Ω) (%) +25 °C +85 °C +125 °C 40 kHz 1 kHz 6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C 150 C 5 0001 0101 0201 0301 2001 3001 4001 4.5 90.0 113 10 0.065 3.3 2.0 150 C 10 0002 0102 0202 0302 2002 3002 4002 4.5 90.0 113 10 0.065 3.3 2.0 150 C 20 0003 0103 0203 0303 2003 3003 4003 4.5 90.0 113 10 0.065 3.3 2.0 180 C 5 0004 0104 0204 0304 2004 3004 4004 5.5 110 138 10 0.060 3.4 2.4 180 C 10 0005 0105 0205 0305 2005 3005 4005 5.5 110 138 10 0.060 3.4 2.4 270 D 5 0006 0106 0206 0306 2006 3006 4006 6.5 130 163 10 0.050 4.1 3.4 270 D 10 0007 0107 0207 0307 2007 3007 4007 6.5 130 163 10 0.050 4.1 3.4 330 D 5 0008 0108 0208 0308 2008 3008 4008 7.5 150 188 12 0.045 4.3 3.8 330 D 10 0009 0109 0209 0309 2009 3009 4009 7.5 150 188 12 0.045 4.3 3.8 330 D 20 0010 0110 0210 0310 2010 3010 4010 7.5 150 188 12 0.045 4.3 3.8 1.8 10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C 82 C 5 0011 0111 0211 0311 2011 3011 4011 4.0 80.0 100 8 0.085 2.9 82 C 10 0012 0112 0212 0312 2012 3012 4012 4.0 80.0 100 8 0.085 2.9 1.8 100 C 5 0013 0113 0213 0313 2013 3013 4013 5.0 100 125 8 0.075 3.0 2.2 100 C 10 0014 0114 0214 0314 2014 3014 4014 5.0 100 125 8 0.075 3.0 2.2 100 C 20 0015 0115 0215 0315 2015 3015 4015 5.0 100 125 8 0.075 3.0 2.2 120 C 5 0016 0116 0216 0136 2016 3016 4016 6.0 120 150 8 0.070 3.2 2.5 120 C 10 0017 0117 0217 0317 2017 3017 4017 6.0 120 150 8 0.070 3.2 2.5 180 D 5 0018 0118 0218 0318 2018 3018 4018 9.0 180 226 8 0.060 3.7 3.4 180 D 10 0019 0119 0219 0319 2019 3019 4019 9.0 180 226 8 0.060 3.7 3.4 220 D 5 0020 0120 0220 0320 2020 3020 4020 10.0 200 250 10 0.055 3.9 3.4 220 D 10 0021 0121 0221 0321 2021 3021 4021 10.0 200 250 10 0.055 3.9 3.4 220 D 20 0022 0122 0222 0322 2022 3022 4022 10.0 200 250 10 0.055 3.9 3.4 6 0.100 2.6 1.8 15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C 56 C 5 0023 0123 0223 0323 2023 3023 4023 4.0 80.0 100 56 C 10 0024 0124 0224 0324 2024 3024 4024 4.0 80.0 100 6 0.100 2.6 1.8 68 C 5 0025 0125 0225 0325 2025 3025 4025 5.0 100 125 6 0.095 2.7 2.2 68 C 10 0026 0126 0226 0326 2026 3026 4026 5.0 100 125 6 0.095 2.7 2.2 68 C 20 0027 0127 0227 0327 2027 3027 4027 5.0 100 125 6 0.095 2.7 2.2 120 D 5 0028 0128 0228 0328 2028 3028 4028 9.0 180 226 8 0.070 3.5 2.8 120 D 10 0029 0129 0229 0329 2029 3029 4029 9.0 180 226 8 0.070 3.5 2.8 150 D 5 0030 0130 0230 0330 2030 3030 4030 10.0 200 250 8 0.065 3.6 3.1 150 D 10 0031 0131 0231 0331 2031 3031 4031 10.0 200 250 8 0.065 3.6 3.1 150 D 20 0032 0132 0232 0332 2032 3032 4032 10.0 200 250 8 0.065 3.6 3.1 20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C 27 C 5 0033 0133 0233 0333 2033 3033 4033 2.5 50.0 63.0 5 0.145 2.2 1.2 27 C 10 0034 0134 0234 0334 2034 3034 4034 2.5 50.0 63.0 5 0.145 2.2 1.2 33 C 5 0035 0135 0235 0335 2035 3035 4035 3.5 70.0 88.0 5 0.130 2.3 1.4 33 C 10 0036 0136 0236 0336 2036 3036 4036 3.5 70.0 88.0 5 0.130 2.3 1.4 33 C 20 0037 0137 0237 0337 2037 3037 4037 3.5 70.0 88.0 5 0.130 2.3 1.4 39 C 5 0038 0138 0238 0338 2038 3038 4038 4.0 80.0 100 5 0.120 2.4 1.7 39 C 10 0039 0139 0239 0339 2039 3039 4039 4.0 80.0 100 5 0.120 2.4 1.7 47 C 5 0040 0140 0240 0340 2040 3040 4040 4.5 90.0 113 6 0.110 2.5 1.8 Revision: 15-Dec-2021 Document Number: 40158 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39003/09 www.vishay.com Vishay STANDARD RATINGS CAP. CAPACITANCE CASE TOL. (μF) CODE (± %) PART NO. M39003/09FAILURE RATE LEVEL (%/1000 h) M 1.0 P R S B C D 0.1 0.01 0.001 0.1 0.01 0.001 DERATED MAX. RIPPLE MAX. MAX. CURRENT MAX. DCL (μA) AT DF AT ESR AT AT +25 °C +25 °C +25 °C (A) 1 kHz 100 kHz (Ω) (%) +25 °C +85 °C +125 °C 40 kHz 1 kHz 20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C 47 47 56 56 68 68 68 82 82 100 100 100 C C D D D D D D D D D D 10 20 5 10 5 10 20 5 10 5 10 20 0041 0042 0043 0044 0045 0046 0047 0048 0049 0050 0051 0052 0141 0142 0143 0144 0145 0146 0147 0148 0149 0150 0151 0152 22 22 22 27 27 33 33 33 39 39 47 47 47 C C C D D D D D D D D D D 5 10 20 5 10 5 10 20 5 10 5 10 20 0053 0054 0055 0056 0057 0058 0059 0060 0061 0062 0063 0064 0065 0153 0154 0155 0156 0157 0158 0159 0160 0161 0162 0163 0164 0165 5.6 5.6 6.8 6.8 6.8 8.2 8.2 10 10 10 12 12 15 15 15 18 18 22 22 22 C C C C C C C C C C C C C C C C C D D D 5 10 5 10 20 5 10 5 10 20 5 10 5 10 20 5 10 5 10 20 0066 0067 0068 0069 0070 0071 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0166 0167 0168 0169 0170 0171 0172 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 0241 0242 0243 0244 0245 0246 0247 0248 0249 0250 0251 0252 0341 0342 0343 0344 0345 0346 0347 0348 0349 0350 0351 0352 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4.5 4.5 5.5 5.5 7.0 7.0 7.0 8.0 8.0 10.0 10.0 10.0 90.0 90.0 110 110 140 140 140 160 160 200 200 200 113 113 138 138 175 175 175 200 200 250 250 250 6 6 6 6 6 6 6 6 6 8 8 8 0.110 0.110 0.100 0.100 0.095 0.095 0.095 0.085 0.085 0.075 0.075 0.075 2.5 2.5 2.9 2.9 3.0 3.0 3.0 3.1 3.1 3.3 3.3 3.3 1.8 1.8 2.2 2.2 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 5 5 5 5 5 5 5 5 0.160 0.160 0.160 0.145 0.145 0.130 0.130 0.130 0.120 0.120 0.110 0.110 0.110 2.1 2.1 2.1 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.7 2.7 2.7 1.5 1.5 1.5 1.9 1.9 1.9 1.9 1.9 2.0 2.0 2.2 2.2 2.2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 0.300 0.300 0.275 0.275 0.275 0.250 0.250 0.230 0.230 0.230 0.210 0.210 0.190 0.190 0.190 0.175 0.175 0.160 0.160 0.160 1.5 1.5 1.6 1.6 1.6 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.3 2.3 2.3 0.6 0.6 0.7 0.7 0.7 0.9 0.9 1.1 1.1 1.1 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.7 1.7 1.7 35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C 0253 0254 0255 0256 0257 0258 0259 0260 0261 0262 0263 0264 0265 0353 0354 0355 0356 0357 0358 0359 0360 0361 0362 0363 0364 0365 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4.0 4.0 4.0 4.5 4.5 5.5 5.5 5.5 7.0 7.0 8.0 8.0 8.0 80.0 80.0 80.0 90.0 90.0 110 110 110 140 140 160 160 160 100 100 100 113 113 138 138 138 175 175 200 200 200 50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C Revision: 15-Dec-2021 0266 0267 0268 0269 0270 0271 0272 0273 0274 0275 0276 0277 0278 0279 0280 0281 0282 0283 0284 0285 0366 0367 0368 0369 0370 0371 0372 0373 0374 0375 0376 0377 0378 0379 0380 0381 0382 0383 0384 0385 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 2.2 2.2 2.2 2.2 2.2 2.5 2.5 2.5 2.5 2.5 3.0 3.0 4.0 4.0 4.0 4.5 4.5 5.5 5.5 5.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 50.0 50.0 60.0 60.0 80.0 80.0 80.0 90.0 90.0 110 110 110 56.0 56.0 56.0 56.0 56.0 63.0 63.0 63.0 63.0 63.0 75.0 75.0 100 100 100 113 113 138 138 138 Document Number: 40158 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M39003/09 www.vishay.com Vishay STANDARD PACKAGING QUANTITY QUANTITY (pcs/reel) CASE CODE FULL REEL /TR; /RR; /WR HALF REEL /HR BULK QUANTITY PARTIAL REEL /PR PER TRAY PER BOX C 500 250 100 20 100 D 500 250 100 20 80 INSIDE TAPE SPACING PACKAGING OPTION CASE CODE TAPE SPACING /TR; /HR; /PR C, D 2.88 ± 0.02 [73.0 ± 0.51] /RR C, D 2.47 ± 0.02 [62.7 ± 0.51] /WR C, D 2.05 ± 0.02 [52.1 ± 0.51] PRODUCT INFORMATION Quick Reference Guide www.vishay.com/doc?40037 Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?40033 Mounting of Through-Hole Components www.vishay.com/doc?40108 Frequently Asked Questions www.vishay.com/doc?40110 Solid Tantalum Capacitors (With MnO2 Electrolyte) Voltage Derating www.vishay.com/doc?40246 Revision: 15-Dec-2021 Document Number: 40158 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000