MBR10xx, MBRF10xx, MBRB10xx
www.vishay.com
Vishay General Semiconductor
Schottky Barrier Rectifier
TO-220AC
FEATURES
ITO-220AC
• Power pack
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
2
2
MBR1045
MBR1060
MBRF1045
MBRF1060
1
PIN 1
1
PIN 1
CASE
PIN 2
PIN 2
D2PAK
(TO-263AB)
K
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
• AEC-Q101 qualified available
(for ITO-220AC and D2PAK (TO-263AB) package)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
2
1
MBRB1045
MBRB1060
PIN 1
PIN 2
DESIGN SUPPORT TOOLS
K
HEATSINK
click logo to get started
Models
Available
PRIMARY CHARACTERISTICS
IF(AV)
10 A
VRRM
45 V, 60 V
IFSM
150 A
VF
0.57 V, 0.70 V
TJ max.
150 °C
Package
TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Circuit configuration
Single
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code, e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
SYMBOL
MBR1045
MBR1060
Maximum repetitive peak reverse voltage
VRRM
45
60
Maximum average forward rectified current (fig. 1)
IF(AV)
10
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
IFSM
150
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
IRRM
Voltage rate of change (rated VR)
dV/dt
10 000
TJ
-65 to +150
TSTG
-65 to +175
VAC
1500
PARAMETER
Operating junction and storage temperature range
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
1.0
UNIT
V
A
0.5
A
V/μs
°C
V
Revision: 19-Sep-2018
Document Number: 88669
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10xx, MBRF10xx, MBRB10xx
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum instantaneous forward voltage
Maximum instantaneous reverse current
at DC blocking voltage
VF
IR
(1)
(2)
MBR1045
MBR1060
IF = 10 A
TJ = 25 °C
-
0.80
IF = 10 A
TJ = 125 °C
0.57
0.70
IF = 20 A
TJ = 25 °C
0.84
0.95
IF = 20 A
TJ = 125 °C
0.72
0.85
TEST CONDITIONS
Rated VR
TJ = 25 °C
0.10
TJ = 125 °C
15
UNIT
V
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width 40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance from junction to case
SYMBOL
MBR
MBRF
MBRB
UNIT
RJC
2.0
4.0
2.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
MBR1045-E3/45
1.80
45
50/tube
Tube
ITO-220AC
MBRF1045-E3/45
1.94
45
50/tube
Tube
TO-263AB
MBRB1045-E3/45
1.33
45
50/tube
Tube
TO-263AB
MBRB1045-E3/81
1.33
81
800/reel
Tape and reel
ITO-220AC
MBRF1045HE3_A/P
(1)
1.94
P
50/tube
Tube
TO-263AB
MBRB1045HE3_B/P (1)
1.33
P
50/tube
Tube
TO-263AB
MBRB1045HE3_B/I (1)
1.33
I
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified, available in ITO-220AC and D2PAK (TO-263AB) package
Revision: 19-Sep-2018
Document Number: 88669
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10xx, MBRF10xx, MBRB10xx
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
12
100
Instantenous Reverse Current (mA)
Average Forward Current (A)
Resistive or Inductive Load
10
8
6
4
2
MBR1045
MBR1060
1
TJ = 75 °C
0.1
TJ = 25 °C
MBR1045
MBR1060
0.01
0.001
0
0
50
100
150
0
20
40
60
80
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
TJ = TJ max.
8.3 ms Single half sine-wave
Junction Capacitance (pF)
150
125
100
75
50
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
MBR1045
MBR1060
25
100
100
10
1
0.1
0.1
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 5 - Typical Junction Capacitance
100
100
TJ = 150 °C
10
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
10 000
175
Peak Forward Surge Current (A)
TJ = 125 °C
10
Pulse Width = 300 µs
1 % Duty Cycle
1
TJ = 25 °C
0.1
MBR1045
MBR1060
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
10
1
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 19-Sep-2018
Document Number: 88669
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR10xx, MBRF10xx, MBRB10xx
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeter
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.635 (16.13)
0.625 (15.87)
PIN
1
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
2
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
PIN 1
CASE
PIN 2
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
ITO-220AC
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.076 (1.93) REF.
45° REF.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.025 (0.64)
0.015 (0.38)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.110 (2.79)
0.100 (2.54)
0.028 (0.71)
0.020 (0.51)
Mounting Pad Layout
0.42 (10.66) min.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) min.
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) min.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 19-Sep-2018
Document Number: 88669
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000