MMD25-0341N1

MM22, MM24 www.vishay.com Vishay Dale Rack and Panel Connectors Military, MIL-C-28748/7/8 Qualified and Commercial Microminiature Rectangular FEATURES • Qualified to MIL-C-28748/7/8 • Solder cup contacts • Dip solder contacts • Fixed and turnable screwlocks • Optional closed entry socket contacts APPLICATIONS Especially suited for use in airborne, instrumentation and portable equipment applications or wherever the following requirements must be met: Minimum space and weight without sacrifice of performance, high quality materials, long service life, high vibration and shock resistance and positive locking. ELECTRICAL SPECIFICATIONS Current Rating: Model MM22 = 5 A Model MM24 = 3 A Breakdown Voltage: At sea level: 2000 VRMS At 70 000 feet: 500 VRMS MATERIAL SPECIFICATIONS Contact Pin: Phosphor bronze Contact Socket: Phosphor bronze (Beryllium copper available on request) Contact Plating: Gold Screwlocks: Stainless steel, passivated Guides: Brass, gold plated or stainless steel, passivated Standard Body: Glass-filled diallyl phthalate per MIL-M-14, Model SDG-F, green DIMENSIONS in inches [millimeters] MMS With Solder Cup Contacts 0.110 [2.79] Typ. 0.034 [0.864] Dia. Solder Cup MMP With Solder Cup Contacts MMDS With Dip Solder Contacts 0.030 [0.762] D B MMDP With Dip Solder Contacts 0.140 [3.56] 0.140 [3.56] C D CONTACT GAUGE B DIAMETER CONTACT GAUGE C DIP TAIL LENGTH D DIAMETER 22 AWG 0.030 ± 0.001 [0.762 ± 0.025] 22 AWG 0.160 or 0.350 [4.06 or 8.89] nom. 0.025 [0.635] 24 AWG 0.025 ± 0.001 [0.635 ± 0.025] 24 AWG 0.160 or 0.350 [4.06 or 8.89] nom. 0.025 [0.635] Revision: 24-Feb-14 Document Number: 36008 1 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MM22, MM24 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] MMS With Fixed (026, 027) Guides 0.230 [5.84] 0.140 [3.56] 0.030 [0.762] Wide x 0.040 [1.02] Deep Slot Typ. 0.110 [2.79] 0.034 [0.864] Dia. Solder Cup #22 or #24 AWG Max. 0.490 [12.45] 0.230 [5.84] “A” End of Connector 0.620 [15.75] 0.230 [5.84] 0.140 [3.56] 0.040 [1.02] Typ. 0.034 [0.864] Dia. Solder Cup #22 or #24 AWG Max. MMP With Fixed (026L, 027L) Guides “A” End of Connector 0.590 [14.99] Revision: 24-Feb-14 026L 0.078 [1.98] 0.125 [3.17] 027 0.078 [1.98] 0.125 [3.17] 027L 0.078 [1.98] 0.125 [3.17] Short Turnable Screwlocks (SK030) Fixed Screwlocks (SLL) 0.250 [6.35] 0.950 [24.13] 0.140 [3.56] 0.030 [0.762] Wide x 0.040 [1.02] Deep Typ. 0.046 [1.17] Wide x 0.062 [1.57] Deep Typ. 0.187 [4.75] Dia. 0.140 [3.56] 0.110 [2.79] 0.110 [2.79] 0.910 [23.11] 0.500 [12.70] Fixed Screwlocks And Nylon Retaining Nut And Fiber Washer (NSL) 0.620 [15.75] 0.230 [5.84] Turnable Screwlocks (SK) 0.540 [13.72] 0.590 [14.99] Short Turnable Screwlocks (SK2035) 0.240 [6.10] Typ. 0.610 [15.49] 0.140 [3.56] 0.093 [2.36] Hex Socket 0.090 [2.29] Deep Typ. 0.034 [0.864] Dia. Solder Cup #22 or #24 AWG Max. 0.520 [13.21] 0.125 [3.17] 0.160 [4.06] 0.250 [6.35] 2-56 UNC-2A Typ. 0.110 [2.79] 0.140 [3.56] 0.078 [1.98] 0.140 [3.56] 0.124 [3.15] Dia. 0.490 [12.45] 026 E Dia. 0.030 [0.762] Typ. Fixed Screwlocks (SL) F DIAMETER 0.140 [3.56] F Dia. MMS With Fixed (026L, 027L) Guides E DIAMETER MMP With Fixed (026, 027) Guides 0.520 [13.21] 2-56 UNC-2A Thread Typ. HARDWARE TYPE 0.110 [2.79] 0.590 [14.99] 0.180 [4.57] Dia. 0.620 [15.75] 0.580 [14.73] 0.110 [2.79] Document Number: 36008 2 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MM22, MM24 www.vishay.com Vishay Dale HARDWARE MATING CHART HARDWARE MODEL MATES WITH HARDWARE MODEL 026 026, 026L 027 027, 027L SK SL, NSL or SLL SK030 SL, NSL or SLL SK2 SL2, NSL2 or SL2L SK2030 SL2, NSL2 or SL2L SK2035 SL2, NSL2 or SL2L NOTE: EITHER MMP OR MMS CONNECTORS MAY BE ORDERED WITH ANY TYPE OF HARDWARE SHOWN. EXAMPLES: 1. MMP WITH 026 HARDWARE WOULD MATE WITH AN MMS WITH 026 HARDWARE. 2. MMS WITH SK HARDWARE WOULD MATE WITH AN MMP WITH SL OR NSL HARDWARE. 3. MMS WITH SL2 HARDWARE WOULD MATE WITH AN MMP WITH SK2 OR SK2030 HARDWARE. DIMENSIONS in inches [millimeters] NOTE: The views below show the wiring side of a pin model connector (female is opposite). Socket hardware assembled at “A” contact end of a pin model connector. 0.210 ± 0.020 [5.33 ± 0.508] 0.210 ± 0.020 [5.33 ± 0.508] 0.210 ± 0.020 [5.33 ± 0.508] 0.105 [2.67] 0.030 [0.762] R Typ. (5 thru 9) A A C B D C 0.468 [11.89] 0.690 [17.53] E 0.135 [3.43] L P T W E J M A R U H L S V X 0.814 [20.68] 1.06 [26.92] 20 CONTACTS Revision: 24-Feb-14 K B E J M P R T U W Z c X a S V Y b F J 0.656 [16.66] 0.135 [3.43] H 1.0 [25.40] 1.25 [31.75] d 26 CONTACTS L P T W Z c f C B E J F K M E J M 0.190 [4.83] R U X a d K S V Y b e D E D C E h 29 CONTACTS R P S T U W 1.34 [34.04] L N AA EE KK X Y CC BB Z DD FF HH V LL MM JJ 1.03 [26.16] 1.25 [31.75] NN 34 CONTACTS N P N R A C 0.625 [15.88] 0.880 [22.35] H M S U X W 0.190 [4.83] S W AA EE KK Y BB YY DD CC FF HH MM PP UU SS Z LL JJ NN RR WW VV P B D J N T U A M L V K 1.28 [32.51] 1.50 [38.10] TT XX 0.190 [4.83] F L R 0.656 [16.66] 0.870 [22.10] V 18 CONTACTS F R E 0.380 [9.65] B T S J K M K M F H 1.09 [27.69] J H B F K C C A C 14 CONTACTS A F N B D E H J L M P 0.780 0.532 [19.81] [13.51] C B A 0.380 [9.65] 0.380 [9.65] 0.380 [9.65] 0.135 [3.43] 11 CONTACTS 0.135 [3.43] D F N D 0.270 [6.86] C K 0.060 [1.52] R Typ. A D 0.880 (11 thru 44) H L [22.35] B 9 CONTACTS A F K H 0.135 [3.43] C N F E 7 CONTACTS D H C 0.562 [14.27] 0.790 [20.07] D 0.270 [6.86] 0.270 [6.86] B A B H 5 CONTACTS A 0.105 [2.67] 0.105 [2.67] E D 0.270 [6.86] 0.270 [6.86] a e E H K U L R T X V Z b c k r F J Y h v B D N P 0.190 [4.83] n t d f m j p s w u 1.41 [35.81] 1.62 [41.15] x y AA CC BB DD EE HH FF z ZZ 44 CONTACTS 50 CONTACTS Document Number: 36008 3 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MM22, MM24 www.vishay.com Vishay Dale MOUNTING VARIATIONS in inches [millimeters] 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. DIP SOLDER PC BOARD MOUNTING PATTERNS Male (MMP) connector shown - female is opposite.  Contact, contact row and mating hole CL to CL Dimensions also applies to solder cup style connectors. A A A 0.188 [4.78] Ref. 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. 0.040 [1.02] 0.140 [3.56] Typ. 0.081 [2.06] 0.140 [3.56] Typ. 0.093 [2.36] Dia. Typ. 0.532 [13.51] 0.081 [2.06] 0.125 [3.17] Typ. 0.162 [4.11] 0.124 [3.15] Typ. C A B 0.564 [14.33] Ref. 0.814 [20.68] 0.162 [4.11] 0.125 [3.17] Typ. 0.093 [2.36] Dia. Typ. A 0.047 [1.19] Typ. 0.093 [2.36] Dia. Typ. C A B 1.0 [25.40] 0.081 [2.06] 0.162 [4.11] 0.124 [3.15] Typ. 26 CONTACTS 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. B D A 0.846 [21.49] Ref. 1.09 [27.69] 0.081 [2.06] 0.124 [3.15] Typ. 0.162 [4.11] 29 CONTACTS 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. B C D A C C 0.752 [19.10] Ref. 1.03 [26.16] 0.140 [3.56] Typ. 0.090 [2.29] Typ. 0.135 [3.43] 0.270 [6.86] Typ. 34 CONTACTS Revision: 24-Feb-14 0.270 [6.86] Ref. A 0.752 [19.10] Ref. 20 CONTACTS D 0.135 [3.43] Typ. B 0.081 [2.06] B 0.140 [3.56] Typ. 0.090 [2.29] Typ. 18 CONTACTS 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. C 0.656 [16.66] 14 CONTACTS 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. C 0.625 [15.88] 0.081 [2.06] A D 0.376 [9.55] Ref. B 0.376 [9.55] Ref. 0.162 [4.11] 11 CONTACTS 0.047 [1.19] Typ. B A C B 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. 0.093 [2.36] Dia. Typ. 0.047 [1.19] Typ. A C 0.656 [16.66] 0.040 0.140 [3.56] [1.02] Typ. 0.081 [2.06] 9 CONTACTS 7 CONTACTS 0.047 [1.19] Typ. B 0.376 [9.55] Ref. 0.562 [14.27] 0.040 [1.02] 0.081 [2.06] 5 CONTACTS 0.282 [7.16] Ref. B 0.282 [7.16] Ref. 0.468 [11.89] B 0.987 [25.07] Ref. 0.090 [2.29] Typ. 1.28 [32.51] 0.147 [3.73] 0.135 Typ. [3.43] 0.270 [6.86] Typ. 44 CONTACTS 1.13 [28.70] Ref. 0.090 [2.29] Typ. 1.41 [35.81] 0.135 [3.43] Typ. 0.140 [3.56] Typ. 0.270 [6.86] Ref. 50 CONTACTS Document Number: 36008 4 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MM22, MM24 www.vishay.com Vishay Dale PANEL CUTOUT in inches [millimeters] NUMBER OF CONTACTS A B C NUMBER OF CONTACTS A B C 5 0.210 [5.33] 0.468 [11.89] 0.340 [8.64] 20 0.270 [6.86] 0.814 [20.68] 0.690 [17.53] 7 0.210 [5.33] 0.562 [14.27] 0.440 [11.18] 26 0.270 [6.86] 1.0 [25.40] 0.870 [22.10] 9 0.210 [5.33] 0.656 [16.66] 0.530 [13.46] 29 0.270 [6.86] 1.09 [27.69] 0.970 [24.64] 11 0.270 [6.86] 0.532 [13.51] 0.410 [10.41] 34 0.380 [9.65] 1.03 [26.16] 0.910 [23.11] 14 0.270 [6.86] 0.625 [15.88] 0.500 [12.70] 44 0.380 [9.65] 1.28 [32.51] 1.16 [29.46] 18 0.380 [9.65] 0.656 [16.66] 0.530 [13.46] 50 0.380 [9.65] 1.41 [35.81] 1.28 [32.51] A B C 0.050 [1.27] R Typ. 0.093 [2.36] DIMENSIONS in inches [millimeters] PANEL CUTOUT NOTE: The views below show the wiring side of a pin model connector (socket style is opposite). Socket hardware is assembled at “A” contact end of pin connector. in inches [millimeters] 0.160 [4.06] 0.500 [12.70] 0.344 [8.74] 0.093 [2.36] 0.172 [4.37] 0.250 [6.35 0.060 [1.52] R 0.500 [12.70] 0.344 [8.74] 0.093 [2.36] R 2 Places 0.113 [2.87] 0.155 [3.94] 0.047 [1.19] 0.893 Typ. [22.68] Ref. 0.126 + 0.002 - 0.000 [3.20 + 0.051 - 0.000] Dia. Typ. 0.080 [2.03] Typ. C E B D 0.172 [4.37] A 0.093 [2.36] Dia. Typ. 0.250 [6.35] 0.893 [22.68] Ref. 1.20 [30.48] 1.08 [27.43] 1.20 [30.48] 1.43 0.047 [1.19] Typ. [36.32] 0.090 [2.29] Typ. 1.20 [30.48] 0.344 [8.74] 0.093 [2.36] Dia. Typ. 0.172 [4.37] 0.155 [3.94] Typ. 0.360 [9.14] Ref. 0.180 [4.57] Typ. 0.093 [2.36] “C50” Configuration 0.090 [2.29] Typ. “C50” Configuration DIP SOLDER PC BOARD MOUNTING PATTERNS Male (MMP) connector shown - female is opposite. Contact, contact row and mating hole CL to CL dimensions also applies to solder cup style connectors. Revision: 24-Feb-14 Document Number: 36008 5 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MM22, MM24 www.vishay.com Vishay Dale ORDERING INFORMATION CONNECTOR MM C D1 HARDWARE B P 22 G - 5 R 026 (1) CONTACTS MODEL TERMINATION (OPTIONAL) CONTACT CONTACT PLATING NUMBER OF (OPTIONAL) HARDWARE STYLE SIZE CONTACTS VARIATIONS Microminiature R = Reversed guides or screwlocks (Omit for standard) P = Pin S = Socket B = Beryllium copper contacts optional on solder cup socket contacts only. (Omit for standard contacts) (OPTIONAL) Dip solder termination optional. (Omit for standard solder cup) Select tail length: D1 = 0.160" [4.06 mm] nominal D2 = 0.350" [8.89 mm] nominal 22 AWG = 0.030" [0.762 mm] diameter 24 AWG = 0.025" [0.635 mm] diameter Optional plating available: G = Gold (0.00003 thick) over Nickel G5 = Gold (0.00005 thick) over Nickel Omit designator for gold (0.00001 thick) over Nickel 5, 7, 9, 11, 14, 18, 20, 26, 29, 34, 44 or 50 (2) (OPTIONAL) Closed entry socket contacts optional on 22 AWG socket contacts only. (Omit for standard contacts) (Omit if no hardware desired) 026 = Slotted brass guides 0.078" [1.98 mm] diameter 026L = Long slotted brass guides 0.078" [1.98 mm] diameter 027 = Slotted cres guides 0.078" [1.98 mm] diameter 027L = Longslotted cres guides 0.078" [1.98 mm] diameter SL = Chassis mounted fixed screwlocks (3-48 thread) SL2 = Chassis mounted fixed screwlocks (2-56 thread) SLL = Chassis mounted fixed screwlocks long (3-48 thread) SL2L = Chassis mounted fixed screwlocks long (2-56 thread) NSL = Chassis mounted fixed screwlocks (3-48 thread) with nylon retaining nuts and fiber washers NSL2 = Chassis mounted fixed screwlocks (3-48 thread) with nylon retaining nuts and fiber washers SK = Cable mounted - turnable screwlocks (3-48 thread) SK2 = Cable mounted - turnable screwlocks (2-56 thread) SK030 = Cable mounted - turnable screwlocks (3-48 thread) with short knobs SK2030 = Cable mounted - turnable screwlocks (2-56 thread) with short knobs SK2035 = Cable mounted - tunable screwlocks (2-56 thread) with socket head knobs Notes (1) To order complete connector with hardware supplied unassembled, add suffix “UA” on end of hardware designation. (2) 50 contact connectors are available in either the standard 4-row contact arrangement per MIL-C-28748 or a special 5-row contact arrangement. To order the special 5-row contact arrangement, use the designator “C50” for the number of contacts. Revision: 24-Feb-14 Document Number: 36008 6 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000