MURS260-M3/5BT

MURS240-M3, MURS260-M3 www.vishay.com Vishay General Semiconductor Surface-Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated pellet chip junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMB (DO-214AA) Cathode Anode LINKS TO ADDITIONAL RESOURCES 3D 3D • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 400 V, 600 V IFSM 35 A trr 50 ns VF 1.20 V TJ max. 175 °C Package SMB (DO-214AA) Circuit configuration Single Case: SMB (DO-214AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking codes MURS240 MURS260 M2G M2J 400 600 UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current at TL = 125 °C (fig. 1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 35 A TJ, TSTG -65 to +175 °C Operating junction and storage temperature range V Revision: 09-Apr-2020 Document Number: 89922 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS240-M3, MURS260-M3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage IF = 2.0 A Maximum instantaneous reverse current Rated VR TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL MURS240 MURS260 1.45 VF (1) V 1.20 5.0 IR (2) UNIT μA 150 Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 10 % IRM trr 75 ns Maximum forward recovery time IF = 1.0 A, dI/dt = 100 A/μs, recovery to 1.0 V tfr 50 ns Notes (1) Pulse test: t = 300 μs, duty cycle ≤ 2 % p (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance junction to lead MURS240 RθJL MURS260 15 UNIT °C/W Note (1) Units mounted on PCB with 30 mm x 30 mm copper pad areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MURS240-M3/52T 0.093 52T 750 7" diameter plastic tape and reel MURS240-M3/5BT 0.093 5BT 3200 13" diameter plastic tape and reel Revision: 09-Apr-2020 Document Number: 89922 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS240-M3, MURS260-M3 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title 100 2.0 1.0 10000 TJ = 175 °C 10 1000 TJ = 100 °C 1st line 2nd line 2nd line Instantaneous Forward Current (A) Average Forward Rectified Current (A) 3.0 1 TJ = 25 °C 100 0.1 TJ = -40 °C 10 0.01 0 0 25 50 75 100 125 150 0 175 0.4 0.8 1.2 1.6 2.0 2.4 Lead Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Instantaneous Forward Characteristics Axis Title Average Power Loss (W) D = 0.5 2.0 D = 0.3 D = 0.2 D = 1.0 D = 0.1 1.5 1.0 T 0.5 D = tp/T tp TJ = 175 °C 10 1000 1 TJ = 100 °C 0.1 100 TJ = 25 °C 0.01 TJ = -40 °C 0.001 0 0 0.5 1.0 1.5 2.0 1st line 2nd line 2nd line Instantaneous Reverse Current (µA) D = 0.8 0 2.5 20 40 10 60 80 100 Average Forward Current (A) Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Reverse Leakage Characteristics 10000 100 40 1000 1st line 2nd line 30 20 100 10 10 0 1 10 100 Junction Capacitance (pF) 50 2nd line Peak Forward Surge Current (A) 10000 100 2.5 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 1 10 Number of Cycles at 50 Hz Reverse Voltage (V) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance 100 Revision: 09-Apr-2020 Document Number: 89922 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS240-M3, MURS260-M3 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMB (DO-214AA) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 09-Apr-2020 Document Number: 89922 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000