P2TC0805D2001LNTA

P2TC www.vishay.com Vishay Sfernice High Precision Wraparound - ± 2 ppm/°C TCR Thin Film Chip Resistors FEATURES • Load life stability 0.05 % typical at 2000 h at 70 °C under Pn Available • Low temperature coefficient: ± 2 ppm/°C (-55 °C; +155 °C) Available • Very low noise < -35 dB and voltage coefficient < 0.01 ppm/V • Wide resistance range: 100 Ω to 3.05 MΩ depending on size Available Available • Tolerances to ± 0.01 % LINKS TO ADDITIONAL RESOURCES • Termination: thin film technology 3D 3D • Sulfur resistant (per ASTM B809-95 humid vapor test) 3D Models For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, Vishay Sfernice’s proven precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics typical ± 2 ppm/°C (-55 °C; +155 °C). • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE (Ω) RATED POWER W Pn (1) RATED POWER W Pd (1) LIMITING ELEMENT VOLTAGE V TOLERANCE ±% P2TC0402 0402 100 to 35K 0.063 0.040 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 P2TC0603 0603 100 to 128K 0.125 0.100 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 P2TC0805 0805 100 to 291K 0.200 0.125 150 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 P2TC1206 1206 100 to 1.09M 0.330 0.250 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 P2TC2010 2010 100 to 3.05M 1 0.500 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 Notes (1) Pn = nominal power : Pd = derated power intended to improve stability (2) For ohmic range versus tolerance and TCR see detailed table on next page CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating temperature range Substrate Alumina Technology Thin film -55 °C; +155 °C Note • For temperature up to 230 °C, see PHT datasheet (www.vishay.com/doc?53050) Film Protection PERFORMANCE VS. HUMID SULFUR VAPOR Test conditions Test results Revision: 20-Feb-2023 50 °C ± 2 °C, 85 % ± 4 % RH, exposure time 500 h Resistance drift < (0.05 % R + 0.05 Ω), no corrosion products observed Terminations Nickel chromium with mineral passivation Epoxy + silicone N type: SnAg over nickel barrier for solder reflow G type: gold over nickel barrier for other applications B type: SnPb over nickel barrier for solder reflow Document Number: 53080 1 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A D D B C E E CASE SIZE A B MAX. TOL. +0.152 (+0.006) MIN. TOL. -0.152 (-0.006) MAX. TOL. +0.127 (+0.005) MIN. TOL. -0.127 (-0.005) NOMINAL NOMINAL NOMINAL TOLERANCE 0.25 (0.010) 0.1 (0.004) D/E C 0402 1.00 (0.039) 0.60 (0.024) 0603 1.52 (0.060) 0.85 (0.033) 0805 1.91 (0.075) 1.27 (0.050) 1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016) 2010 5.08 (0.200) 2.54 (0.100) 0.48 (0.019) 0.5 (0.02) ± 0.127 (0.005) 0.38 (0.015) 0.13 (0.005) SUGGESTED LAND PATTERN (to IPC-7351A) Gmin. Xmax. Zmax. DIMENSIONS in millimeters (inches) CHIP SIZE Zmax. Gmin. Xmax. 0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039) 0805 2.76 (0.109) 0.74 (0.029) 1.40 (0.055) 1206 3.91 (0.154) 1.85 (0.073) 1.73 (0.068) 2010 5.93 (0.233) 3.71 (0.146) 2.67 (0.105) TEMPERATURE COEFFICIENT Revision: 20-Feb-2023 TYPICAL TCR (ppm/°C) TYPICAL TCR AND MAX. SPREAD (ppm/°C) ±2 ±2±2 Document Number: 53080 2 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice POWER DERATING CURVE Axis Title 10000 120 1000 80 1st line 2nd line 2nd line Rated Power (%) 100 60 100 40 20 10 0 0 20 40 60 70 80 100 120 140 160 Ambient Temperature (°C) 155 BEST TOLERANCE AND TCR VS. OHMIC VALUE STYLE RANGE (Ω) TOLERANCE (± %) 100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 250 to 35K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 250 to 128K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 0402 0603 100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 250 to 291K 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 250 to 1M09 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 100 to < 250 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 250 to 3M05 0.01; 0.02; 0.05; 0.1; 0.25; 0.5; 1; 2; 5 0805 1206 2010 POPULAR OPTIONS For any option it is recommended to consult Vishay Sfernice for availability first. Option: Marking Option to order 0013: Marking of ohmic value and tolerance: Sizes 0805: 3 digits marking (according to EIA-96) Sizes 1206 and 2010: 4 digits marking (same codification than in the ordering procedure) Tolerance indicated by a color dot. Option to order 0014: Marking of ohmic value: Sizes 0805: 3 digits marking (according to EIA-96) Sizes 1206 and 2010: 4 digits marking (same codification than in the ordering procedure) No standard marking available for smaller sizes. A price adder will apply to the unit price of the parts for options 0013 and 0014. Revision: 20-Feb-2023 Document Number: 53080 3 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice PACKAGING ESD packaging available: waffle-pack, and plastic tape and reel (low conductivity). NUMBER OF PIECES PER PACKAGE SIZE MOQ 0402 100 100 1206 140 2010 60 TAPE WIDTH TAPE AND REEL MIN. 340 0603 0805 WAFFLE PACK 2" × 2" MAX. 5000 100 4000 8 mm 1000 PACKAGING RULES Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get “not stacked up” waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code. Tape and Reel See Part Numbering information to get the quantity desired by tape. PERFORMANCE TESTS Thermal shock Short time overload Low temperature operation Resistance to solder heat CONDITIONS MIL-PRF-55342G MIL-STD-202 F-Method 107 F MIL-PRF-55342G PARA 3.10.4.7.5 MIL-PRF-55342G PARA 3.9 and 4.7.4 MIL-PRF-55342G PARA 3.12, 4.7.7, 4.7.1.2 MIL OR CECC REQUIREMENTS TYPICAL PERFORMANCES ± 0.05 % ± 0.02 % ± 0.05 % ± 0.01 % ± 0.05 % ± 0.01 % ± 0.05 % ± 0.03 % ± 0.10 % ± 0.01 % ± 0.10 % ± 0.01 % ± 0.05 % ± 0.05 % ± 0.5 % ± 0.1 % (2) MIL-PRF-55342G Moisture resistance PARA 3.13 and 4.7.8 MIL-STD-202 F-Method 106 E CECC 56 days / 40 °C / 93 % RH High temperature MIL-PRF-55342G PARA 3.11 and 4.7.6 MIL-PRF-55342G Load life 8000 h Pn at 70 °C MIL-STD-202 F-Method 108 A Revision: 20-Feb-2023 Document Number: 53080 4 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice Maximum permissible pulse load Pi max. for single pulse (1) Axis Title 10000 P2TC1206 P2TC2010 10 1000 1st line 2nd line 2nd line P - Permissible Pulse Power (W) 100 P2TC0402 P2TC0603 1 100 P2TC0805 0.1 0.00001 10 0.0001 0.001 0.01 0.1 1 10 t - Pulse Duration (s) Energy for single pulse (1) Axis Title 10000 100 1 P2TC2010 P2TC1206 1000 1st line 2nd line 2nd line Permissible Pulse Energy (J) 10 0.1 P2TC0402 0.01 P2TC0603 P2TC0805 100 0.001 0.0001 0.00001 0.00001 10 0.0001 0.001 0.01 0.1 1 10 t - Pulse Duration (s) Maximum permissible pulse voltage Ui max. for single pulse (1) Axis Title 10000 P2TC1206 1000 1000 P2TC2010 1st line 2nd line 2nd line Permissible Pulse Voltage (V) 10 000 P2TC0402 100 P2TC0603 100 P2TC0805 10 0.00001 10 0.0001 0.001 0.01 0.1 1 10 t - Pulse Duration (s) Note (1) One should apply the datas mentioned on the 3 curves together to get the right performances Revision: 20-Feb-2023 Document Number: 53080 5 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice Maximum permissible pulse load Pi max. Axis Title 10000 P2TC1206 10 1000 P2TC2010 1st line 2nd line 2nd line P - Permissible Pulse Power (W) 100 P2TC0402 1 100 P2TC0603 P2TC0805 0.1 0.00001 10 0.0001 0.001 0.01 0.1 1 10 t - Pulse Duration (s) 1.2/50 μs lightning surge Axis Title 10000 10 000 P2TC2010 1000 1000 1st line 2nd line 2nd line Test Voltage (V) P2TC1206 P2TC0805 P2TC0603 100 100 10 10 100 1000 10 000 10 100 000 Resistor Value (Ω) 10/700 μs lightning surge Axis Title 10000 P2TC1206 1000 P2TC2010 1000 1st line 2nd line 2nd line Test Voltage (V) 10 000 P2TC0805 P2TC0603 100 100 10 10 100 1000 10 000 10 100 000 Resistor Value (Ω) Revision: 20-Feb-2023 Document Number: 53080 6 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P2TC www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P2TC1206D1003BNT99 P 2 T C 1 2 0 6 D GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION P2TC 0402 0603 0805 1206 2010 D = ± 2 ppm The first three digits are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point L = ± 0.01 % P = ± 0.02 % W = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F=±1% G=±2% J=±5% N: SnAg over nickel barrier G: gold over nickel barrier B: SnPb over nickel barrier For more information see “Codification of packaging” table For more information see “Codification of packaging” table Examples: 1000 = 100 Ω 3901 = 3900 Ω 1004 = 1 MΩ CODIFICATION OF OPTIONS ON TWO DIGITS 1 0 0 3 B N T 9 9 Leave blank if no option CODIFICATION OF SIZES OPTION OPTION 2 DIGITS CODE 18 CODE 40 .. .. 9 0402 0099 99 C 0603 0100 0A D 0805 0101 0A H 1206 0102 0C J 2010 0103 0D 0104 0E CODIFICATION OF PACKAGING 0105 0F CODE 18 .. .. WAFFLE PACK 0124 0Y W 0125 0Z WA 0126 1A PLASTIC TAPE (in standard for all sizes) 0127 1B T 0128 1C TA 100 min., 100 mult. .. .. TB 250 min., 250 mult. 0320 8M TC 500 min., 500 mult. 0321 8N TD 1000 min., 1000 mult. 0322 8O TE 2500 min., 2500 mult. 0323 8P TF Full tape (quantity depending on size of chips) 0324 8Q 0325 8R .. .. Revision: 20-Feb-2023 PACKAGING 100 min., 1 mult. 100 min., 100 mult. (available only in size 1206) 100 min., 1 mult. Document Number: 53080 7 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000