PTN1206E3360BST1

PTN www.vishay.com Vishay Dale Thin Film Commercial Thin Film Chip Resistor, Surface-Mount Chip FEATURES • • • • Actual Size 1505 These chip resistors are available in both “top side” and “wraparound” termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF-55342. CONSTRUCTION Passivation Tantalum Nitride Resistive Film Solder Coating • • • • • • • • Moisture resistant High purity alumina substrate Non-standard values available Available Will pass +85 °C, 85 % relative humidity and Available 10 % rated power 100 % visual inspected per MIL-PRF-55342 Non-inductive Available Very low noise and voltage coefficient (< -30 dB) Laser-trimmed tolerances to ± 0.05 % Available Wraparound resistance less than 10 m Epoxy bondable termination available Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 10 TOL. 0.05 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 1.0  to 3 M ± 10 ppm/°C to ± 100 ppm/°C ± 0.05 % to ± 5 % R ± 0.03 % 0.1 ppm/V 75 V to 200 V -55 °C to +155 °C -55 °C to +155 °C < -30 dB - CONDITIONS -55 °C to +125 °C +25 °C 2000 h at 70 °C - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) WORKING VOLTAGE (V) 0402 50 75 0502 100 75 0505 150 75 0603 150 75 0705 200 100 0805 200 100 1005 250 100 1010 500 150 1206 400 200 1505 400 150 2208 750 150 2010 800 200 2000 200 2512 (2) Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) (2) Reference environmental tests table for short time overload test parameters Revision: 08-Jan-2020 RESISTANCE RANGE () 1.5 to 51.1K 1.5 to 65K 10 to 130K 1.5 to 130K 1.0 to 310K 1.0 to 310K 1.5 to 360K 1.0 to 600K 1.5 to 1M 1.25 to 1M 2.0 to 1.75M 1.0 to 2M 1.5 to 3M Document Number: 60026 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTN www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE L W 0402 0.042 ± 0.008 0.022 ± 0.005 0502 0.055 ± 0.006 0.025 ± 0.005 0505 0.055 ± 0.006 0.050 ± 0.005 0603 0.064 ± 0.006 0.032 ± 0.005 0705, 0805 (1) 0.080 ± 0.006 0.050 ± 0.005 1005 0.105 ± 0.007 0.050 ± 0.005 1010 0.105 ± 0.007 0.100 ± 0.005 1206 0.126 ± 0.008 0.063 ± 0.005 1505 0.155 ± 0.007 0.050 ± 0.005 2010 0.209 ± 0.009 0.098 ± 0.005 2208 0.230 ± 0.007 0.075 ± 0.005 2512 0.259 ± 0.009 0.124 ± 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) T 0.012 to 0.033 0.012 to 0.033 0.012 to 0.033 0.020 max. 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 D E 0.010 ± 0.005 0.010 ± 0.005 0.010 ± 0.005 0.015 ± 0.005 0.010 ± 0.005 0.015 ± 0.005 0.012 ± 0.005 0.015 ± 0.005 0.016 ± 0.008 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 + 0.005/ - 0.010 0.020 + 0.005/ - 0.010 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements) ENVIRONMENTAL TEST Resistance Temperature Characteristic Max. Ambient Temp. at Rated Wattage Max. Ambient Temp. at Power Derating Thermal Shock R Low Temperature Operation R Short Time Overload (1) R High Temperature Exposure R Resistance to Soldering Heat R Moisture Resistance R Life +70 °C at 1000 h R Insulation Resistance LIMITS MIL-PRF-55342 CHARACTERISTIC “E” ± 25 ppm/°C +70 °C +150 °C ± 0.1 % ± 0.1 % ± 0.10 % ± 0.1 % ± 0.2 % ± 0.2 % ± 0.50 % TYPICAL VISHAY PERFORMANCE ± 15 ppm/°C +70 °C +150 °C ± 0.040 % ± 0.001 % ± 0.002 % ± 0.04 % ± 0.008 % ± 0.004 % ± 0.02 % 10 000  minimum > 100 000 M Note (1) 2512 short time overload test is based on 1 W power level below critical value of 20 k FILM LOAD LIFE STABILITY (at +125 °C) DERATING CURVE 100 Maximum Absolute Change 0.01 % 0.006 % 0.005 % 0.004 % 0.003 % 0.002 % Percent of Rated Power 0.1 % 0.06 % 0.05 % 0.04 % 0.03 % 0.02 % 80 60 40 20 0 0.001 % 200 400 600 800 1000 1200 1400 1600 1800 2000 Time in h at + 125 °C Revision: 08-Jan-2020 0 70 125 155 Ambient Temperature °C Document Number: 60026 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTN www.vishay.com Vishay Dale Thin Film PULSE CURVE 1000 10 Ω - 2512 100 Ω - 2512 10 Ω - 1206 100 Ω - 1206 Peak Power (W) 100 10 10 Ω - 0805 100 Ω - 0805 10 Ω - 0603 100 Ω - 0603 1 0.1 0.00001 0.0001 0.001 0.01 Pulse Duration (s) 0.1 1 10 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTN1206E1002BBT1 P T GLOBAL MODEL PTN N 1 2 CASE SIZE TCR CHARACTERISTIC 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 D = ± 15 ppm/°C (1) E = ± 25 ppm/°C (2) H = ± 50 ppm/°C (2) K = ± 100 ppm/°C L = ± 200 ppm/°C Y = ± 10 ppm/°C (3) 0 6 E RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point.  Example: 10R0 = 10  1000 = 100  1001 = 1 k 1 0 TOLERANCE A = ± 0.05 % B = ± 0.1 % D = ± 0.5 % F = ± 1 % G = ± 2 % J=±5% (4) 0 2 B B T 1 TERMINATION PACKAGING B = wraparound Sn/Pb solder Sn63  w/nickel barrier G = wraparound Au  over Ni (gold)  termination epoxy bondable RoHS-compliant - e4 S = wraparound  electroplated 100 % pure matte tin RoHS-compliant - e3 BS = BULK 100 min., 1 mult. W0 = WAFFLE 100 min., 100 mult. WS = WAFFLE 100 min., 1 mult. WI = 100 min., 1 mult. (item single lot date code) WP = 100 min., 1 mult. (package unit single lot date code)  TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. (5) T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) Historical Part Number example: PTN0805H8801BBT (for reference purposes only) PTN 0805 H 8801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Notes (1) Not available below 50  (2) Not available below 10  (3) Not available below 100  (4) Only available in  1 k (5) Preferred packaging code RESISTANCE 10  to 49.9  50  to 99  100  to 999  1 k to 3 M 5  to 10  1.0  to 5  Revision: 08-Jan-2020 TCR (ppm/°C) 25, 50, 100, 200 15, 25, 50, 100, 200 10, 15, 25, 50, 100, 200 10, 15, 25, 50, 100, 200 100, 200 200 TOLERANCE (%) 0.1, 0.5, 1, 2, 5 0.1, 0.5, 1, 2, 5 0.1, 0.5, 1, 2, 5 0.05, 0.1, 0.5, 1, 2, 5 1, 2, 5 1, 2, 5 Document Number: 60026 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000