RGL41G-E3/96

BYM11-xxx, RGL41x www.vishay.com Vishay General Semiconductor Surface-Mount Glass Passivated Junction Fast Switching Rectifier FEATURES • Superectifier structure for high reliability condition Superectifier • Ideal for automated placement ® • Fast switching for high efficiency • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C GL41 (DO-213AB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 1000 V MECHANICAL DATA IFSM 30 A trr 150 ns, 250 ns, 500 ns VF 1.3 V TJ max. 175 °C Package GL41 (DO-213AB) Circuit configuration Single Case: GL41 (DO-213AB), molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER FAST SWITCHING TIME DEVICE: 1ST BAND IS RED SYMBOL Polarity color bands (2nd band) BYM 11-50 BYM 11-100 RGL41A RGL41B BYM 11-200 BYM 11-400 RGL41D RGL41G BYM 11-600 RGL41J BYM 11-800 BYM 11-1000 UNIT RGL41K RGL41M Gray Red Orange Yellow Green Blue Violet Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TT = 55 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum full load reverse current, full cycle average at TA = 55 °C IR(AV) 50 μA TJ, TSTG -65 to +175 °C Operating junction and storage temperature range Revision: 18-May-2021 Document Number: 88547 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM11-xxx, RGL41x www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 VF Maximum DC reverse current at rated DC blocking voltage BYM 11-400 BYM 11-600 BYM 11-800 BYM UNIT 11-1000 1.3 TA = 25 °C V 5.0 IR TA = 125 °C Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ μA 50 150 250 500 ns 15 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM 11-100 BYM 11-200 BYM 11-400 (1) 75 RθJT (2) 30 RθJA Maximum thermal resistance BYM 11-50 BYM 11-600 BYM 11-800 BYM 11-1000 UNIT °C/W Notes (1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE RGL41J-E3/96 0.114 96 1500 7" diameter plastic tape and reel RGL41J-E3/97 0.114 97 5000 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.25 1.00 0.75 0.50 0.25 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Revision: 18-May-2021 Document Number: 88547 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM11-xxx, RGL41x www.vishay.com Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 0.01 0.4 10 1 0.6 0.8 1.0 1.2 1.4 1.6 10 1 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 1 Transient Thermal Impedance (°C/W) 10 Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 100 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 10 1 Mounted on 0.20" x 0.27" (5 mm x 7 mm) Copper Pad Areas 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GL41 (DO-213AB) Solderable Ends 1st Band Mounting Pad Layout D2 = D1 +- 00.008 (0.20) 0.138 (3.5) MAX. D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Revision: 18-May-2021 Document Number: 88547 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000