RNX125470KJKEL

End of Life Jan-2021 RNX www.vishay.com Vishay Dale Metal Oxide Resistors, Special Purpose, High Voltage FEATURES • Low TCR: ± 200 ppm/°C standard; ± 100 ppm/°C; ± 50 ppm/°C available Available • Tolerance: ± 1 % standard to 1 GΩ; ± 5 % above 1 GΩ; ± 0.5 % available in ± 50 ppm/°C only. Special tolerance and / or temperature coefficient matching available • High voltage (up to 8 kV) Available • For oil bath or open air operation • Matched sets available • Special testing available upon request • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS POWER RATING MAXIMUM WORKING VOLTAGE (2) V GLOBAL MODEL HISTORICAL MODEL RNX025 RNX-1/4 0.5 0.36 0.25 750 RNX038 RNX-3/8 1.0 0.72 0.5 1.5K RNX050 RNX-1/2 1.2 0.86 0.6 2K RNX075 RNX-3/4 2.0 1.44 1.0 3K RNX100 RNX-1 2.5 1.8 1.25 4K RNX125 RNX-1-1/4 3.0 2.16 1.5 5K RNX150 RNX-1-1/2 4.0 2.88 2.0 6K RNX200 RNX-2 5.0 3.6 2.5 8K P25 °C W (1) P70 °C W (1) P125 °C W (1) RESISTANCE RANGE (3) Ω TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C 1M to 22M 1K to 100M 100 to 100K 1M to 50M 1K to 100M 1K to 1G 100 to 100K 1M to 100M 1K to 250M 1K to 2G 100 to 100K 1M to 100M 1K to 500M 1K to 2G 100 to 100K 1M to 100M 1K to 500M 1K to 2G 100 to 1M 1K to 500M 1K to 2G 100 to 1M 1K to 500M 1K to 2G 100 to 1M 1K to 500M 1K to 2G 100 to 1M 0.5, 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 0.5, 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 0.5, 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 0.5, 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 0.5, 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 50 100, 200 Non-inductive (4) 50 100 200 Non-inductive (4) 50 100 200 Non-inductive (4) 50 100 200 Non-inductive (4) 50 100 200 Non-inductive (4) 100 200 Non-inductive (4) 100 200 Non-inductive (4) 100 200 Non-inductive (4) Notes • All resistance values are calibrated at 100 VDC. Calibration at other voltages available • Part marking: Print marked - DALE, model, value, tolerance, TCR, date code (model and date omitted on RNX-1/4) • Special modifications: - Special preconditioning (power aging, temperature cycling etc.) to customer specifications - Non-helixed resistors can be supplied for critical high frequency applications (non-inductive) (1) Increase wattage by 25 % for 0.032" (0.813 mm) diameter leads (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (3) For resistance values above and below those listed please contact us (4) Non-inductive ± 200 ppm/°C TCR only Revision: 11-Jan-2021 Document Number: 31032 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life Jan-2021 RNX www.vishay.com Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER UNIT RNX025 RNX038 Ω °C Insulation Resistance Category Temperature Range RNX050 RNX075 RNX100 RNX125 RNX150 RNX200 ≥ 1011 Epoxy coated = - 55/+ 150; silicone coated = - 55/+ 225 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNX05010K0KKLB (preferred part numbering format) R N X GLOBAL RESISTANCE VALUE MODEL (See Standard R=Ω K = kΩ Electrical M = MΩ Specifications G = GΩ table) 910R = 910 Ω 10M0 = 10 MΩ 1G00 = 1.0 GΩ 0 5 0 1 0 K TOLERANCE TEMP. CODE COEFFICIENT D = ± 0.5 % H = 50 ppm K = 100 ppm F=±1% N = 200 ppm G=±2% J=±5% K = ± 10 % 0 K K L B PACKAGING (1) CONSTRUCTION SPECIAL EL = Lead (Pb)-free, lacer EE = Lead (Pb)-free, T/R (1/4, 3/8, 1/2, 3/4, 1 only) LB = Tin/lead, lacer RC = Tin/lead, T/R (1/4, 3/8, 1/2, 3/4, 1 only) Blank = Standard N = Non-inductive P = 0.032" Ø leads Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable Historical Part Number example: RNX-1/210K0KK (will continue to be accepted) RNX-1/2 10K0 K K L05 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING CONSTRUCTION Notes (1) Some packaging codes are model specific • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544) DIMENSIONS in inches (millimeters) 1.50 ± 0.125 (38.10 ± 3.18) 0.025 ± 0.002 (1) (0.64 ± 0.05) L L1 max. 0.140 + 0.015 - 0.010 (3.56 + 0.38 - 0.25) GLOBAL MODEL L L1 MAX. RNX025 RNX038 RNX050 RNX075 RNX100 RNX125 RNX150 RNX200 0.290 ± 0.020 (7.37 ± 0.51) 0.420 ± 0.020 (10.67 ± 0.51) 0.540 ± 0.020 (13.72 ± 0.51) 0.790 ± 0.020 (20.07 ± 0.51) 1.040 ± 0.020 (26.42 ± 0.51) 1.290 ± 0.020 (32.77 ± 0.51) 1.540 ± 0.020 (39.12 ± 0.51) 2.040 ± 0.020 (51.82 ± 0.51) 0.358 (9.09) 0.470 (11.94) 0.595 (15.11) 0.845 (21.46) 1.100 (27.94) 1.350 (34.29) 1.600 (40.64) 2.100 (53.34) % RATED POWER Note (1) Available with 0.032" (0.813 mm) leads ± 0.002" (0.051 mm) 120 MATERIAL SPECIFICATIONS 100 Element Core 80 60 SILICONE COATING 40 High temperature fired cermet film High purity 96 % alumina Coating Flame-retardant epoxy on RNX025 and RNX038, flameproof silicone on RNX050 to RNX200 Termination Standard lead material is solder-coated copper. Solderable and weldable. EPOXY COATING 20 0 0 50 DERATING 100 150 200 250 AMBIENT TEMPERATURE IN °C MECHANICAL SPECIFICATIONS Terminal Strength Solderability Revision: 11-Jan-2021 5 pound pull test Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 Document Number: 31032 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life Jan-2021 RNX www.vishay.com Vishay Dale AVERAGE V.C., ppm/V 0 - 10 - 20 106 107 108 109 - 1/4 - 3/8 - 3/4, - 1 - 1 1/4, - 1 1/2 - 1/2 VOLTAGE COEFFICIENT Revision: 11-Jan-2021 1010 -2 RESISTANCE (Ω) Document Number: 31032 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000