SE15PB, SE15PD, SE15PG, SE15PJ
www.vishay.com
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
FEATURES
eSMP ® Series
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop
• Typical IR less than 0.1 μA
• ESD capability
• Meets MSL level 1, per
LF maximum peak of 260 °C
SMP (DO-220AA)
Cathode
J-STD-020,
• AEC-Q101 qualified
Anode
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
TYPICAL APPLICATIONS
3D 3D
General purpose, power line polarity protection and
rail-to-rail protection in consumer, industrial, and
automotive applications.
3D Models
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
1.5 A
VRRM
100 V, 200 V, 400 V, 600 V
IR
5 μA
VF at IF = 1.0 A
0.868 V
TJ max.
175 °C
Package
SMP (DO-220AA)
Circuit configuration
Single
Case: SMP (DO-220AA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
automotive grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
SE15PB
SE15PD
SE15PG
SE15PJ
15B
15D
15G
15J
100
200
400
600
UNIT
V
Max. repetitive peak reverse voltage
VRRM
Average forward current (fig. 1)
IF(AV)
1.5
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
30
A
TJ, TSTG
-55 to +175
°C
Operating junction and storage temperature range
Revision: 25-Oct-2022
Document Number: 89025
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE15PB, SE15PD, SE15PG, SE15PJ
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA = 25 °C
TYP.
MAX.
0.968
1.05
0.868
0.95
-
5.0
5.4
50
UNIT
Max. instantaneous
forward voltage
IF = 1.5 A
Max. reverse current
Rated VR
Max. reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
900
-
ns
Typical junction capacitance
4.0 V, 1 MHz
CJ
9.5
-
pF
VF (1)
TA = 125 °C
TA = 25 °C
IR (2)
TA = 125 °C
V
μA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
RθJA
Typical thermal resistance
SE15PB
SE15PD
(1)
SE15PG
SE15PJ
UNIT
105
RθJL (1)
25
RθJC (1)
30
°C/W
Note
(1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. R
θJL - is
measured at the terminal of cathode band. RθJC is measured at the top center of the body.
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
TEST TYPE
TEST CONDITIONS
SYMBOL
CLASS
VALUE
AEC-Q101-001
Human body model (contact mode)
C = 100 pF, R = 1.5 kΩ
H3B
> 8 kV
AEC-Q101-002
Machine model (contact mode)
C = 200 pF, R = 0 Ω
M4
> 400 V
JESD22-A114
Human body model (contact mode)
C = 100 pF, R = 1.5 kΩ
JESD22-A115
Machine model (contact mode)
C = 200 pF, R = 0 Ω
IEC 61000-4-2 (2)
VC
3B
> 8 kV
C
> 400 V
Human body model (contact mode)
C = 150 pF, R = 330 Ω
4
> 8 kV
Human body model (air-discharge mode) (1)
C = 150 pF, R = 330 Ω
4
> 15 kV
Notes
Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV
(2) System ESD standard
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SE15PJ-M3/84A
0.024
84A
3000
7" diameter plastic tape and reel
SE15PJ-M3/85A
0.024
85A
10 000
13" diameter plastic tape and reel
SE15PJHM3/84A (1)
0.024
84A
3000
7" diameter plastic tape and reel
SE15PJHM3/85A (1)
0.024
85A
10 000
13" diameter plastic tape and reel
Note
Automotive grade
(1)
Revision: 25-Oct-2022
Document Number: 89025
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE15PB, SE15PD, SE15PG, SE15PJ
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Axis Title
2.0
100
1.5
1.0
0.5
TL Measured
at the Cathode Band Terminal
TJ = 150 °C
10
1000
1
0.1
25
50
75
TJ = 25 °C
0.01
TJ = -40 °C
100
125
150
10
10
175
20
30
40
50
60
70
80
90 100
Percent of Rated Peak Reverse Voltage (%)
Lead Temperature (°C)
Fig. 4 - Typical Instantaneous Forward Characteristics
Fig. 1 - Max. Forward Current Derating Curve
1.8
100
D = 0.5
1.6
D = 0.8
D = 0.3
1.4
Junction Capacitance (pF)
Average Power Loss (W)
100
0.001
0
0
10000
TJ = 175 °C
1st line
2nd line
2nd line
Instantaneous Reverse Current (µA)
Average Forward Current (A)
Resistive or Inductive Load
D = 0.2
1.2
D = 1.0
D = 0.1
1.0
0.8
T
0.6
0.4
D = tp/T
0.2
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
tp
1
0
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0.1
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Instantaneous Forward Characteristics
Axis Title
10000
TJ = 175 °C
1000
TJ = 150 °C
1st line
2nd line
2nd line
Instantaneous Forward Current (A)
10
1
TJ = 25 °C
100
TJ = -40 °C
0.1
10
0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Instantaneous Forward Voltage (V)
Fig. 3 - Forward Power Loss Characteristics
Revision: 25-Oct-2022
Document Number: 89025
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE15PB, SE15PD, SE15PG, SE15PJ
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMP (DO-220AA)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.103 (2.60)
0.087 (2.20)
0.032 (0.80)
0.016 (0.40)
0.158 (4.00)
0.146 (3.70)
Mounting pad layout
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.025 0.030
(0.635) (0.762)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
0.100
(2.54)
0.050
(1.27)
Revision: 25-Oct-2022
Document Number: 89025
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000