SFH6135-X001

SFH6135, SFH6136 www.vishay.com Vishay Semiconductors High Speed Optocoupler, 1 MBd, Transistor Output FEATURES NC 1 8 C (VCC) • Isolation test voltage 5300 VRMS A 2 7 B (VB) • TTL compatible C 3 6 C (VO) • High bit rates: 1 MBit/s NC 4 5 E (GND) • High common mode interference immunity • Bandwidth 2 MHz • Open collector output i179075 • External base wiring possible LINKS TO ADDITIONAL RESOURCES • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D 3D Related Documents Design Tools 3D Models Footprints Schematics AGENCY APPROVALS • UL 1577 Models • cUL 1577 • DIN EN 60747-5-5 (VDE 0884-5) DESCRIPTION • CQC The SFH6135 and SFH6136 optocouplers feature a high signal transmission rate and a high isolation resistance. They have a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. ORDERING INFORMATION S F H 6 1 PART NUMBER 3 # - X 0 # PACKAGE OPTION # DIP-8 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 Option 8 Option 9 9.27 mm > 0.1 mm > 0.7 mm AGENCY CERTIFIED / PACKAGE CTR (%) UL, cUL, CQC DIP-8 ≥7 ≥ 19 SFH6135 SFH6136 SMD-8, option 7 SFH6135-X007T SFH6136-X007 SMD-8, option 9 - SFH6136-X009T VDE, UL, cUL, CQC DIP-8 ≥7 ≥ 19 - SFH6136-X001 DIP-8, 400 mil, option 6 - SFH6136-X016 SMD-8, option 7 - SFH6136-X017T (1) SMD-8, option 8 - SFH6136-X018 SMD-8, option 9 - SFH6136-X019 Notes • Additional options may be possible, please contact sales office (1) Also available in tubes; do not add T to end Rev. 1.7, 20-Sep-2021 Document Number: 83668 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 3 V Forward current IF 25 mA t = 1 ms, duty cycle 50 % IFM 50 mA t ≤ 1 μs, 300 pulses/s IFSM 1 A Thermal resistance Rthja 700 K/W Power dissipation Pdiss 45 mW VS -0.5 to 30 V V Peak forward current Maximum surge forward current OUTPUT Supply voltage Output voltage VO -0.5 to 25 VEBO 5 V Output current IO 8 mA Maximum output current IO 16 mA Base current IB 5 mA Emitter base voltage Thermal resistance Power dissipation Tamb = 70 °C Rthja 300 K/W Pdiss 100 mW VISO 5300 VRMS COUPLER Isolation test voltage Pollution degree (DIN VDE 0110) Isolation resistance 2 VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Tstg -55 to +125 °C Tamb -55 to +100 °C Tsld 260 °C Storage temperature range Ambient temperature range Soldering temperature (1) Max. ≤ 10 s, dip soldering ≥ 0.5 mm distance from case bottom Ω Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to wave profile for soldering conditions for through hole devices ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 16 mA VF - 1.6 1.9 V Breakdown voltage IR = 10 μA VBR 3 - - V VR = 3 V IR - 0.5 10 μA VR = 0 V, f = 1 MHz CO - 125 - pF IF = 16 mA ΔVF/ΔTamb - 1.7 - mV/°C Reverse current Capacitance Temperature coefficient of forward voltage OUTPUT Logic low supply current IF = 16 mA, VO = open, VCC = 15 V ICCL - 150 - μA Logic high supply current IF = 0 V, VO = open, VCC = 15 V ICCH - 0.01 1 μA IF = 16 mA, VCC = 4.5 V, IO = 1.1 mA SFH6135 VOL - 0.1 0.4 V IF = 16 mA, VCC = 4.5 V, IO = 2.4 mA SFH6136 Output voltage, output low Output current, output high Rev. 1.7, 20-Sep-2021 VOL - 0.1 0.4 V IF = 0 mA, VO = VCC = 5.5 V IOH - 3 500 nA IF = 0 mA, VO = VCC =15 V IOH - 0.01 1 μA Document Number: 83668 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT CIO - 0.6 - pF COUPLER Capacitance (input to output) f = 1 MHz Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 16 mA, VO = 0.4 V, VCC = 4.5 V Current transfer ratio IF = 16 mA, VO = 0.5 V, VCC = 4.5 V PART SYMBOL MIN. TYP. MAX. SFH6135 CTR 7 16 - % SFH6136 CTR 19 35 - % SFH6135 CTR 5 - - % SFH6136 CTR 15 - - % Pulse generator UNIT IF ZO = 50 Ω t r , t f = 5 ns duty cycle 10 % t ≤ 100 µs t 5V 1 8 2 7 3 6 VO 4 5 CL 15 pF VO IF IF monitor 5V RL 1.5 V VOL t 100 Ω tPHL tPLH isfh6135_01 Fig. 1 - Schematics SWITCHING CHARACTERISTICS PARAMETER High to low Low to high TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ SFH6135 tPHL - 0.3 1.5 μs IF = 16 mA, VCC = 5 V, RL = 1.9 kΩ SFH6136 tPHL - 0.2 0.8 μs IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ SFH6135 tPLH - 0.3 1.5 μs IF = 16 mA, VCC = 5 V, RL = 1.9 kΩ SFH6136 tPLH - 0.2 0.8 μs VCM 10 V IF A B 1 8 2 7 3 6 4 5 VFF 90 % 10 % 5V 0V RL VO VO 10 % 90 % t tr tf 5V A: IF = 0 mA +VCM Pulse generator Z O = 50 Ω t r , t f = 8 ns VO VOL isfh6135_02 t B: IF = 16 mA t Fig. 1 - Common Mode Interference Immunity Rev. 1.7, 20-Sep-2021 Document Number: 83668 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors COMMON MODE TRANSIENT IMMUNITY PARAMETER High Low TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 4.1 kΩ SFH6135 CMH - 1000 - V/μs VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 1.9 kΩ SFH6136 CMH - 1000 - V/μs VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 4.1 kΩ SFH6135 CML - 1000 - V/μs VCM = 10 VP-P, VCC = 5 V, IF = 0 mA, RL = 1.9 kΩ SFH6136 CML - 1000 - V/μs SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. - 55 / 100 / 21 399 Climatic classification (according to IEC 68 part 1) Comparative tracking index CTI UNIT 175 - VIOTM 8000 - - V VIORM 890 - - V PSO - - 500 mW ISI - - 300 mA TSI - - 175 °C 7 - - mm Creepage distance Standard DIP-8 Clearance distance Standard DIP-8 7 - - mm Creepage distance 400 mil DIP-8 8 - - mm Clearance distance 400 mil DIP-8 8 - - mm Note • As per IEC 60747-5-5, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 30 IF - LED Current (mA) IF - LED Current (mA) 20 15 75 °C 10 25 °C 0 °C 5 0 20 10 0 1.3 isfh6135_03 1.4 1.5 1.6 1.7 VF - LED Forward Voltage (V) Fig. 3 - LED Forward Current vs. Forward Voltage Rev. 1.7, 20-Sep-2021 0 isfh6135_04 20 40 60 80 100 Ambient Temperature (°C) Fig. 4 - Permissible Forward LED Current vs. Temperature Document Number: 83668 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors Total Power (mW) 100 Detector 80 60 40 Emitter 20 0 0 isfh6135_05 20 40 60 80 700 TPLH at 3 V 600 TPLH at 1.5 V 500 400 TPHL at 1.5 V 300 200 TPHL at 3 V 100 0 - 60 - 40 - 20 isfh6135_08 Ambient Temperature (°C) 0 20 40 60 80 100 TA - Temperature (°C) Fig. 8 - Propagation Delay vs. Ambient Temperature - SFH6136 25 1400 tp-Propagation Delay Time (ns) IO - Output Current (mA) SFH6136 at VCC = 5.0 V IF = 16 mA, RL = 1.9 kW 800 100 Fig. 5 - Permissible Power Dissipation vs. Temperature IF = 40 mA VCC = 5.0 V 1200 20 IF = 35 mA IF = 30 mA IF = 25 mA IF = 20 mA 15 IF = 15 mA 10 IF = 10 mA 5 5 isfh6135_06 10 15 20 25 400 tPHL 200 0 20 40 60 80 100 Fig. 9 - Propagation Delay vs. Ambient Temperature - SFH6135 100 at VO = 0.4 V, 7 VCC = 5.0 V IOH - Collector Current, IC (nA) 8 IF = 20 mA IF = 16 mA 6 IF = 10 mA 5 4 IF = 2 mA 3 2 IF = 1 mA 1 VCC = VO = 15 V 10 1 VCC = VO = 5 V 0.1 0.01 0.001 0 20 40 60 - 60 - 40 - 20 0 80 100 TA - Temperature (°C) Fig. 7 - Output Current vs. Temperature Rev. 1.7, 20-Sep-2021 tPLH isfh6135_09 Fig. 6 - Output Current vs. Output Voltage isfh6135_07 600 TA - Temperature (°C) VO - Output Voltage (V) 0 - 60 - 40 - 20 800 0 - 60 - 40 - 20 0 0 SFH163 at VCC = 5. 0 V IF = 16 mA, RL = 4.1 kΩ 1000 IF = 5 mA IO - Output Current (mA) 900 tp - Propagation Delay Time (ns) 120 isfh6135_10 20 40 60 80 100 TA - Temperature (°C) Fig. 10 - Logic High Output Current vs. Temperature Document Number: 83668 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors ΔIF/ΔIO/Small Signal Current Transfer Ratio 0.6 (VCC = 5.0 V, RL = 100 Ω) 0.5 0.4 0.3 0.2 0.1 0 10 5 0 isfh6135_11 15 20 25 IF (mA) Fig. 11 - Small Signal Current Transfer Ratio vs. Quiescent Input Current PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 ± 0.165 ISO method A 9.77 ± 0.14 0.95 ± 0.19 7.62 typ. 0.79 4° typ. 3.555 ± 0.255 6.095 ± 0.255 1.27 10° 3.045 ± 0.255 0.70 ± 0.19 3° to 9° 0.51 ± 0.05 2.54 typ. 0.25 ± 0.05 i178006 Option 6 Option 7 Option 8 Option 9 7.62 typ. 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 3.5 ± 0.3 0.35 ± 0.25 4.3 ± 0.3 0.25 ± 0.1 3.5 ± 0.3 0.1 ± 0.1 3.6 ± 0.3 0.1 min. 8 min. 2.55 ± 0.25 9.27 min. 0.6 min. 10.3 max. 0.6 min. 12.1 max. 8.16 ± 0.8 2.54 0.76 R 0.25 0.76 2.54 0.76 2.54 10.16 typ. R 0.25 R 0.25 Rev. 1.7, 20-Sep-2021 1.52 9.95 min. 13.0 1.52 7.7 11.05 1.78 8 min. 11.05 1.78 1.52 1.78 20802-1 Document Number: 83668 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6135, SFH6136 www.vishay.com Vishay Semiconductors PACKAGE MARKING SFH6135 V YWW H 68 21764-66 Rev. 1.7, 20-Sep-2021 Document Number: 83668 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000