SFH6156-1

SFH6156 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES A 1 4 C • Excellent CTR linearity depending on forward current C 2 3 E • Isolation test voltage, 5300 VRMS • Fast switching times • Low CTR degradation 1 17448-5 • Low coupling capacitance • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES APPLICATIONS Related Documents Models • Switchmode power supply • Telecom DESCRIPTION • Battery powered equipment The SFH6156 features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic SMD package. AGENCY APPROVALS The safety application model number covering all products in this datasheet is SFH615A. This model number should be used when consulting safety agency documents. The coupling devices are designed for signal transmission between two electrically separated circuits. • UL 1577 • cUL • DIN EN 60747-5-5 (VDE 0884-5) available with option 1 • BSI • CQC • FIMKO ORDERING INFORMATION S F H 6 1 5 6 - PART NUMBER # X CTR BIN 0 SMD-4, 100 mil, pitch VDE, UL, cUL, BSI, FIMKO, CQC SMD-4, 100 mil, pitch 1 PACKAGE OPTION T TAPE AND REEL SMD-4 > 8 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO, CQC 0 10 mA 40 to 80 63 to 125 100 to 200 160 to 320 SFH6156-1 SFH6156-2 SFH6156-3 SFH6156-4 SFH6156-1T SFH6156-2T SFH6156-3T SFH6156-4T 40 to 80 63 to 125 100 to 200 160 to 320 SFH6156-1X001 SFH6156-2X001 SFH6156-3X001 - SFH6156-1X001T SFH6156-2X001T SFH6156-3X001T SFH6156-4X001T - - SFH6156-3X001T1 (1) - Notes • • Additional options may be possible, please contact sales office (1) T1 rotation in tape and reel packaging Document Number: 83671 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V DC forward current IF 60 mA IFSM 2.5 A Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V tp ≤ 10 μs Surge forward current OUTPUT IC 50 mA IC 100 mA Storage temperature range Tstg -55 to +150 °C Ambient temperature range Tamb -55 to +100 °C Tsld 260 °C Collector current tp ≤ 1 ms COUPLER Soldering temperature (1) max. 10 s Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD) Ptot - Power Dissipation (mW) 200 150 Phototransistor 100 50 Diode 0 0 18483 25 50 75 100 125 150 Tamb - Ambient Temperature (°C) Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature Document Number: 83671 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS PARAMETER SYMBOL VALUE UNIT LED power dissipation Pdiss 100 mW Output power dissipation Pdiss 150 mW Maximum LED junction temperature Tjmax. 125 °C Maximum output die junction temperature Tjmax. 125 °C Thermal resistance, junction emitter to board θEB 173 °C/W Thermal resistance, junction emitter to case θEC 149 °C/W Thermal resistance, junction detector to board θDB 111 °C/W Thermal resistance, junction detector to case θDC 127 °C/W Thermal resistance, junction emitter to junction detector θED 95 °C/W θBA 195 °C/W θCA 3573 °C/W Thermal resistance, board to ambient Thermal resistance, case to ambient (1) (1) TA θCA Package TC θEC θDC θDE TJD TJE θDB θEB TB θBA 19996 TA Notes • The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay’s thermal characteristics of optocouplers application note (1) For 2 layer FR4 board (4" x 3" x 0.062") ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VF - 1.25 1.65 V VR = 6 V IR - 0.01 10 μA VR = 0 V, f = 1 MHz CO - 13 - pF INPUT Forward voltage Reverse current Capacitance IF = 60 mA OUTPUT Collector emitter capacitance Collector emitter leakage current VCE = 5 V, f = 1 MHz VCE = 10 V CCE - 5.2 - pF SFH6156-1 ICEO - 2 50 nA SFH6156-2 ICEO - 2 50 nA SFH6156-3 ICEO - 5 100 nA SFH6156-4 ICEO - 5 100 nA VCEsat - 0.25 0.4 V CC - 0.4 - pF COUPLER Collector emitter saturation voltage Coupling capacitance IF = 10 mA, IC = 2.5 mA Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Document Number: 83671 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA, VCE = 5 V IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT SFH6156-1 CTR 40 - 80 % SFH6156-2 CTR 63 - 125 % SFH6156-3 CTR 100 - 200 % SFH6156-4 CTR 160 - 320 % SFH6156-1 CTR 13 30 - % SFH6156-2 CTR 22 45 - % SFH6156-3 CTR 34 70 - % SFH6156-4 CTR 56 90 - % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Turn-on time IF = 10 mA, VCC = 5 V, RL = 75 Ω ton - 3 - μs Rise time IF = 10 mA, VCC = 5 V, RL = 75 Ω tr - 2 - μs Turn-off time IF = 10 mA, VCC = 5 V, RL = 75 Ω toff - 2.3 - μs Fall time IF = 10 mA, VCC = 5 V, RL = 75 Ω tf - 2 - μs Cut-off frequency IF = 10 mA, VCC = 5 V, RL = 75 Ω fCO - 250 - kHz SFH6156-1 ton - 3 - μs SFH6156-2 ton - 4.2 - μs SATURATED IF = 20 mA Turn-on time Rise time Turn-off time Fall time IF = 10 mA SFH6156-3 ton - 4.2 - μs IF = 5 mA SFH6156-4 ton - 6 - μs IF = 20 mA SFH6156-1 tr - 2 - μs SFH6156-2 tr - 3 - μs SFH6156-3 tr - 3 - μs IF = 10 mA IF = 5 mA SFH6156-4 tr - 4 - μs IF = 20 mA SFH6156-1 toff - 18 - μs SFH6156-2 toff - 23 - μs IF = 10 mA SFH6156-3 toff - 23 - μs IF = 5 mA SFH6156-4 toff - 25 - μs IF = 20 mA SFH6156-1 tf - 11 - μs SFH6156-2 tf - 14 - μs SFH6156-3 tf - 14 - μs SFH6156-4 tf - 15 - μs IF = 10 mA IF = 5 mA Document Number: 83671 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL VALUE According to IEC 68 part 1 UNIT 55/100/21 Comparative tracking index CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 V Maximum repetitive peak isolation voltage VIORM 890 V RIO ≥ 1012 Ω Maximum rated withstanding isolation voltage t = 1 min VIO = 500 V, Tamb = 25 °C Isolation resistance RIO ≥ 1011 Ω Output safety power PSO 400 mW Input safety current ISI 275 mA Input safety temperature TSI 175 °C ≥7 mm VIO = 500 V, Tamb = 100 °C Creepage distance Clearance distance Insulation thickness DTI ≥7 mm ≥ 0.4 mm Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 103 IF = 10 mA, VCE = 5 V IF 5 R L = 75 Ω 4 IC (%) I VCC = 5 V IC 3 2 102 1 5 47 Ω 101 - 25 isfh615a_01 0 25 Fig. 2 - Linear Operation (without saturation) 50 75 TA (°C) isfh615a_03 Fig. 4 - Current Transfer Ratio (typ.) vs. Temperature 30 IF =14 mA 1Ω 12 mA V CC = 5 V 20 10 mA IC (mA) IF 8 mA 6 mA 10 47 Ω 4 mA 1 mA isfh615a_02 0 0 isfh615a_04 Fig. 3 - Switching Operation (with saturation) 5 10 2 mA 15 VCE (V) Fig. 5 - Output Characteristics (typ.) Collector Current vs. Collector Emitter Voltage Document Number: 83671 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors 104 1.2 25° 50° 75° 103 tp T tp IF T VF (V) 102 1.0 0.2 0.5 DC 0.9 D= IF (mA) 1.1 D=0 0.005 0.01 0.02 0.05 0.1 Pulse cycle D = parameter 1 10 10- 1 100 101 10- 5 102 isfh615a_07 IF (mA) isfh615a_05 Fig. 6 - Diode Forward Voltage (typ.) vs. Forward Current 10- 4 10- 3 10- 2 10- 1 100 101 tp (s) Fig. 8 - Permissible Pulse Handling Capability Forward Current vs. Pulse Width 20 f = 1 MHz C (pF) 15 10 CCE 5 0 10-2 10-1 100 101 102 Ve (V) isfh615a_06 Fig. 7 - Transistor Capacitance (typ.) vs. Collector Emitter Voltage PACKAGE DIMENSIONS (in millimeters) 0.76 R0.25 2.54 1.78 6.48 6.81 8 min. 11.05 ISO method A 4.55 4.83 0.76 1.14 9.53 10.03 7.52 7.90 0.79 typ. 10° 3.30 3.81 4° typ. 2.54 typ. 1.27 typ. 1.52 0.249 0.102 0.25 typ. Lead coplanarity 0.004 max. Pin 1 identification 8 min. 0.508 1.02 3° to 7° Document Number: 83671 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors PACKAGE MARKING (example of SFH6156-2X001T) YWW Y 68 SFH6156-2 V Notes • VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking TAPE AND REEL PACKAGING (in millimeters) The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 4 pin optocouplers conform to EIA-481-2 and IEC60286-3. SMD-4 (“T”) Pin 1 and top of component 4 ± 0.1 1.5 min. 2 ± 0.05 10 pitch cumulative tolerance on tape ± 0.2 1.75 ± 0.1 0.3 max. Top cover tape 10.2 7.5 ± 0.05 4.07 16 ± 0.3 5.05 13.3 12 0.1 max. Center lines of cavity Embossment 18005 Ø 1.5 Direction of feed SMD-4, 90° Rotation (“T1”) 16.00 + 0.30, -0.10 (0.013 (0.0008), -0.0004) 4 ± 0.1 (0.157 ± 0.004) 2 ± 0.10 (0.079 ± 0.004) 1.75 ± 0.1 1.5 + 0.10, - 0.00 (0.069 ± 0.004) (0.59 ± 0.004) 7.5 ± 0.01 (0.295 ± 0.004) 10.36 ± 0.10 0.408 ± 0.004 16 ± 0.3 (0.630 ± 0.012) 10.36 ± 0.10 0.408 ± 0.004 4° 8.0 ± 0.10 (0.315 + 0.004) 4.92 ± 0.10 0.194 ± 0.004 1.5 + 0.25, - 0.0 0.059 + 0.001, - 0.0 18401 Document Number: 83671 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 SFH6156 www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Axis Title 10000 300 Floor life: unlimited Max. 260 °C 255 °C 240 °C 217 °C 2nd line Temperature (°C) 250 Conditions: Tamb < 30 °C, RH < 85 % 245 °C Moisture sensitivity level 1, according to J-STD-020 1000 200 1st line 2nd line Max. 30 s 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 °C/s 100 Max. ramp up 3 °C/s 50 10 0 0 50 19841-1 100 150 200 250 300 Time (s) Fig. 9 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for SMD Devices Document Number: 83671 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.9, 27-Aug-2021 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000