0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SFH615AY-X009

SFH615AY-X009

  • 厂商:

    TFUNK(威世)

  • 封装:

    4-SMD,鸥翼型

  • 描述:

    OPTOISOLATOR 5.3KV TRANS 4SMD

  • 数据手册
  • 价格&库存
SFH615AY-X009 数据手册
SFH615AA, SFH615AGB, SFH615AGR, SFH615AY www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES • Low CTR degradation A 1 4 C • Good CTR linearity depending on forward current C 2 3 E • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage i179060_1 • Fast switching times • Temperature stable i179060 • Low coupling capacitance DESCRIPTION • End stackable, 0.100" (2.54 mm) spacing The SFH615XXX features a large assortment of current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. • High common mode interference immunity (unconnected base) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS The coupling devices are designed for signal transmission between two electrically separated circuits. • UL1577 • cUL The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with 60950 (DIN VDE 0805) for reinforced insulation up to operation voltage of 400 VRMS or DC. • DIN EN 60747-5-5 (VDE 0884) available with option 1 • BSI ORDERING INFORMATION DIP-# S F H 6 1 5 A x x X PART NUMBER 0 0 PACKAGE OPTION 7.62 mm 10.16 mm Option 7 Option 8 > 0.7 mm DIP-4 Option 9 9.27 mm > 0.1 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO Option 6 # 5 mA 50 to 600 100 to 600 100 to 300 50 to 150 SFH615AA SFH615AGB SFH615AGR SFH615AY DIP-4, 400 mil, option 6 SFH615AA-X006 - - - SMD-4, option 7 SFH615AA-X007 - SFH615AGR-X007T SFH615AY-X007T SMD-4, option 8 - - - SFH615AY-X008T SMD-4, option 9 - SFH615AGB-X009T - SFH615AY-X009T (1) 50 to 600 100 to 600 100 to 300 50 to 150 UL, cUL, VDE, BSI, FIMKO DIP-4 SFH615AA-X001 - SFH615AGR-X001 - - - SFH615AGR-X016 SFH615AY-X016 SMD-4, option 7 SFH615AA-X017T (1) - SFH615AGR-X017T (1) - SMD-4, option 8 - - - SFH615AY-X018T (1) SMD-4, option 9 - - - SFH615AY-X019T (1) DIP-4, 400 mil, option 6 Notes • Additional options may be possible, please contact sales office (1) Also available in tubes; do not add T to end Rev. 2.0, 21-Feb-18 Document Number: 83672 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH615AA, SFH615AGB, SFH615AGR, SFH615AY www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION INPUT Reverse voltage DC forward current Surge forward current Power dissipation OUTPUT Collector emitter voltage Emitter collector voltage tP  10 ms Collector current tP  10 ms Total power dissipation COUPLER Isolation test voltage between emitter and detector Creepage distance Clearance distance Isolation thickness between emitter  and detector Comparative tracking index per DIN IEC 112/VDE 0303, part 1 Isolation resistance VIO = 500 V, Tamb = 25 °C VIO = 500 V, Tamb = 100 °C Storage temperature range Ambient temperature range Soldering temperature (1) max. 10 s, dip soldering distance to seating plane  1.5 mm SYMBOL VALUE UNIT VR IF IFSM Pdiss 6 60 2.5 100 V mA A mW VCEO VECO IC IC Pdiss 70 7 50 100 150 V V mA mA mW VISO 5300 VRMS 7 7 mm mm CTI 175 RIO RIO Tstg Tamb 1012 1011 -55 to +150 -55 to +100   °C °C Tsld 260 °C Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 60 mA VF - 1.25 1.65 V Reverse current VR = 6 V IR - 0.01 10 μA Capacitance VR = 0 V, f = 1 MHz Thermal resistance CO - 13 - pF Rthja - 750 - K/W OUTPUT Collector emitter capacitance VCE = 5 V, f = 1 MHz Thermal resistance Collector emitter saturation voltage IF = 10 mA, IC = 2.5 mA Coupling capacitance CCE - 5.2 - pF Rthja - 500 - K/W VCEsat - 0.25 0.4 V CC - 0.4 - pF COUPLER Collector emitter leakage current VCEO = 10 V SFH615AA ICEO - 10 100 nA SFH615AGB ICEO - 10 100 nA SFH615AGR ICEO - 10 100 nA SFH615AY ICEO - 10 100 nA Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 2.0, 21-Feb-18 Document Number: 83672 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH615AA, SFH615AGB, SFH615AGR, SFH615AY www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IC/IF IF = 5 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT SFH615AA CTR 50 - 600 % SFH615AGB CTR 100 - 600 % SFH615AGR CTR 100 - 300 % SFH615AY CTR 50 - 150 % UNIT SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Turn-on time IF = 5 mA ton - 2 - μs Turn-off time IF = 5 mA toff - 25 - μs TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 20 pF 1 kΩ IF C f = 1.0 MHz 15 VCC = 5 V 10 5 47 Ω CCE isfh615aa_01 0 10-2 10-1 100 isfh615aa_03 Fig. 1 - Switching Operation (with saturation) % 103 IC IF 5 V 102 Fig. 3 - Transistor Capacitance (typ.) vs. Collector Emitter Voltage IF IF = 10 mA, VCC = 5.0 V 101 Ve 120 mA 90 4 3 2 102 60 1 5 30 101 - 25 isfh615aa_02 0 0 25 50 °C 75 TA Fig. 2 - Current Transfer Ratio (typ.) vs. Temperature Rev. 2.0, 21-Feb-18 0 isfh615aa_04 25 50 75 TA °C 100 Fig. 4 - Permissible Diode Forward Current vs. Ambient Temperature Document Number: 83672 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH615AA, SFH615AGB, SFH615AGR, SFH615AY www.vishay.com Ic Vishay Semiconductors 1.2 30 mA VF IF = 14 mA IF = 12 mA 20 V 25 °C 50 °C 75 °C 1.1 IF = 10 mA IF = 8 mA 1.0 IF = 6 mA 10 IF = 4 mA IF = 1 mA 0 IF = 2 mA 0.9 0 5 10 V 15 VCE isfh615aa_05 104 mA 5 103 5 D=0 0.005 0.01 0.02 tp D= T 0.05 0.1 tp IF T Pulse cycle D = parameter 5 101 100 5 101 5 mA IF 102 Fig. 7 - Diode Forward Voltage (typ.) vs. Forward Current 200 Ptot mW 150 Transistor 100 0.2 102 5 isfh615aa_07 Fig. 5 - Output Characteristics (typ.) Collector Current vs. Collector Emitter Voltage IF 10-1 0.5 Diode DC 50 0 10-5 isfh615aa_06 10-4 10-3 10-2 10-1 100 s 101 tp Fig. 6 - Permissible Pulse Handling Capability Forward Current vs. Pulse Width Rev. 2.0, 21-Feb-18 0 isfh615aa_08 25 50 75 TA °C 100 Fig. 8 - Permissible Power Dissipation vs. Temperature Document Number: 83672 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH615AA, SFH615AGB, SFH615AGR, SFH615AY www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 2 1 Pin one ID 6.48 6.81 ISO method A 3 4 4.55 4.83 0.76 1.14 0.79 typ. 7.62 typ. 1.27 typ. 3.30 3.81 i178027 5.84 6.35 10° 4° typ. 0.508 0.89 0.46 0.56 2.79 3.30 0° to 15° 0.2 0.3 1.27 2.54 Option 9 9.53 10.03 7.62 ref. 0.102 0.249 0.25 typ. 0.51 1.02 8 min. 15° max. 18486 Rev. 2.0, 21-Feb-18 Document Number: 83672 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000
SFH615AY-X009 价格&库存

很抱歉,暂时无法提供与“SFH615AY-X009”相匹配的价格&库存,您可以联系我们找货

免费人工找货