SGL41-40/96

BYM13-xx, SGL41-xx www.vishay.com Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • MELF Schottky rectifier • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C GL41 (DO-213AB) • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS LINKS TO ADDITIONAL RESOURCES For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications 3D 3D 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 20 V,30 V, 40 V, 50 V, 60 V IFSM 30 A VF 0.50 V, 0.70 V TJ max. 125 °C, 150 °C Package GL41 (DO-213AB) Circuit configuration Single Case: GL41 (DO-213AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 DENOTES SCHOTTKY DEVICES: 1st BAND IS ORANGE Polarity color bands (2nd band) voltage type SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 Green UNIT Gray Red Orange Yellow Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current (fig. 1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range dV/dt TJ TSTG 10 000 -55 to +125 V/μs -55 to +150 -55 to +150 °C °C Reivision: 01-Sep-2021 Document Number: 88548 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM13-xx, SGL41-xx www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) TEST CONDITIONS 1.0 A Maximum reverse current at rated DC blocking voltage (1) Typical junction capacitance SYMBOL VF BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 0.50 0.50 0.50 0.70 0.70 TA = 25 °C TA = 100 °C 4.0 V, 1.0 MHz UNIT V 0.5 IR CJ 10 5.0 110 80 mA pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance (1) BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 RθJA 75 RθJT 30 SGL41-50 SGL41-60 UNIT °C/W Note Thermal resistance junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SGL41-40-E3/96 0.137 96 1500 7" diameter plastic tape and reel SGL41-40-E3/97 0.137 97 5000 13" diameter plastic tape and reel BYM13-40-E3/96 0.137 96 1500 7" diameter plastic tape and reel BYM13-40-E3/97 0.137 97 5000 13" diameter plastic tape and reel SGL41-40HE3_A/H (1) 0.137 H 1500 7" diameter plastic tape and reel SGL41-40HE3_A/I (1) 0.137 I 5000 13" diameter plastic tape and reel BYM13-40HE3_A/H (1) 0.137 H 1500 7" diameter plastic tape and reel BYM13-40HE3_A/I (1) 0.137 I 5000 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Reivision: 01-Sep-2021 Document Number: 88548 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM13-xx, SGL41-xx www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Resistive or Inductive Load Instantaneous Reverse Current (mA) Average Forward Current (A) 1.0 0.75 SGL41-20 to SGL41-40 0.50 SGL41-50 and SGL41-60 0.25 PCB Mounted on 0.24" x 0.24" (6.0 mm x 6.0 mm) Copper Land Areas 0 0 25 75 50 100 125 150 175 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 10 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 0 Terminal Temperature (°C) 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 1000 At Rated Td 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 25 Junction Capacitance (pF) Peak Forward Surge Current (A) 30 20 15 10 100 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 5 1 100 10 10 0.1 Number of Cycles at 60 Hz 1 10 100 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance Instantaneous Forward Current (A) 100 TJ = 125 °C 10 TJ = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C 0.1 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Reivision: 01-Sep-2021 Document Number: 88548 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYM13-xx, SGL41-xx www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GL41 (DO-213AB) Solderable Ends 1st Band Mounting Pad Layout D2 = D1 +- 00.008 (0.20) 0.138 (3.5) MAX. D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Reivision: 01-Sep-2021 Document Number: 88548 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000