0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SMAJ75AHE3/61

SMAJ75AHE3/61

  • 厂商:

    TFUNK(威世)

  • 封装:

    SMA

  • 描述:

    TVS DIODE 75VWM 121VC SMA

  • 详情介绍
  • 数据手册
  • 价格&库存
SMAJ75AHE3/61 数据手册
SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor Surface-Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package Available • Ideal for automated placement • Glass passivated chip junction • Available in unidirectional and bidirectional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) SMA (DO-214AC) Cathode Anode Available • Excellent clamping capability (unidirectional) (bidirectional) LINKS TO ADDITIONAL RESOURCES 3D 3D • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 3D Models • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VBR uni-directional 6.40 V to 231 V MECHANICAL DATA VBR bi-directional 6.40 V to 231 V VWM 5.0 V to 188 V PPPM 400 W, 300 W PD 3.3 W Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) IFSM 40 A TJ max. 150 °C Polarity Unidirectional, bidirectional Package SMA (DO-214AC) For bidirectional use CA suffix (e.g. SMAJ10CA). Electrical characteristics apply in both directions. Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types DEVICES FOR BIDIRECTION APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) PARAMETER PPPM 400 W Peak pulse current with a waveform (1) IPPM See next table A PD 3.3 W Power dissipation on infinite heatsink at TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) Operating junction and storage temperature range IFSM 40 A TJ, TSTG -55 to +150 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2. Rating is 300 W above 78 V A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 30-Jun-2021 Document Number: 88390 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE (+)SMAJ5.0A (5) (+)SMAJ6.0A (+)SMAJ6.5A (+)SMAJ7.0A (+)SMAJ7.5A (+)SMAJ8.0A (+)SMAJ8.5A (+)SMAJ9.0A (+)SMAJ10A (+)SMAJ11A (+)SMAJ12A (+)SMAJ13A (+)SMAJ14A (+)SMAJ15A (+)SMAJ16A (+)SMAJ17A (+)SMAJ18A (+)SMAJ20A (+)SMAJ22A (+)SMAJ24A (+)SMAJ26A (+)SMAJ28A (+)SMAJ30A (+)SMAJ33A (+)SMAJ36A (+)SMAJ40A (+)SMAJ43A (+)SMAJ45A (+)SMAJ48A (+)SMAJ51A (+)SMAJ54A (+)SMAJ58A (+)SMAJ60A (+)SMAJ64A (+)SMAJ70A (+)SMAJ75A (+)SMAJ78A (+)SMAJ85A (+)SMAJ90A (+)SMAJ100A (+)SMAJ110A (+)SMAJ120A (+)SMAJ130A (+)SMAJ150A (+)SMAJ160A (+)SMAJ170A (+)SMAJ188A DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) UNI AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ RE RG RK RM RP RR RT RV RX RZ SE VG VK VM SP SR SS MIN. 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 209 BI WE WG WK WM WP WR WT WV WX WZ XE XG XK XM XP XR XT XV XX XZ YE YG YK YM YP YR YT YV YX YZ ZE ZG ZK ZM ZP ZR ZT ZV ZX ZZ VE VG VK VM VP VR VS MAX. 7.07 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 231 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 188 800 800 500 200 100 50 10 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 43.5 38.8 35.7 33.3 31.0 29.4 27.8 26.0 23.5 22.0 20.1 18.6 17.2 16.4 15.4 14.5 13.7 12.3 11.3 10.3 9.5 8.8 8.3 7.5 6.9 6.2 5.8 5.5 5.2 4.9 4.6 4.3 4.1 3.9 3.5 3.3 3.2 2.2 2.1 1.9 1.7 1.6 1.4 1.2 1.2 1.09 0.91 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 328 0.057 0.059 0.061 0.065 0.067 0.069 0.073 0.074 0.078 0.080 0.083 0.084 0.087 0.088 0.089 0.090 0.092 0.094 0.096 0.096 0.097 0.098 0.099 0.100 0.100 0.101 0.102 0.102 0.103 0.104 0.104 0.104 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 Notes (1) Pulse test: t ≤ 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bidirectional types having V WM of 10 V and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMAJ5.0CA, the maximum V BR is 7.25 V (6) V = 3.5 V at I = 25 A (unidirectional only) F F (+) Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both unidirectional and bidirectional device Revision: 30-Jun-2021 Document Number: 88390 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient (1) RθJA 120 °C/W Typical thermal resistance, junction to lead RθJL 30 °C/W Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N SMAJ5.0A-E3/61 SMAJ5.0A-M3/61 SMAJ5.0A-E3/5A SMAJ5.0A-M3/5A SMAJ5.0AHE3_A/H (1) SMAJ5.0AHM3_A/H (1) SMAJ5.0AHE3_A/I (1) SMAJ5.0AHM3_A/I (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.064 61 1800 7" diameter plastic tape and reel 0.064 5A 7500 13" diameter plastic tape and reel 0.064 H 1800 7" diameter plastic tape and reel 0.064 I 7500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 30-Jun-2021 Document Number: 88390 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) PPPM - Peak Pulse Power (kW) Non-Repetitive Pulse Waveform Shown in Fig. 3 TA = 25 °C 10 1 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas 0.1 0.1 Measured at Stand-off Voltage VWM TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 Uni-Directional 100 Bi-Directional 10 1 10 100 1000 10 000 1 10 100 td - Pulse Width (μs) VWM - Reverse Stand-Off Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 200 1000 100 Transient Thermal Impedance (°C/W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % SMAJ5.0 thru SMAJ78 SMAJ85 thru SMAJ188 CJ - Junction Capacitance (pF) 10 000 100 75 50 25 25 50 75 100 125 150 175 10 1 0.001 0 0 100 200 0.01 0.1 1.0 10 100 1000 TJ - Initial Temperature (°C) tp - Pulse Duration (s) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Typical Transient Thermal Impedance tr = 10 μs 200 TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM Peak Value IPPM Peak Forward Surge Current (A) IPPM - Peak Pulse Current, % IRSM 150 100 Half Value - IPP IPPM 2 50 10/1000 μs Waveform as Defined by R.E.A. TJ = TJ Max. 8.3 ms Single Half Sine-Wave 100 50 td 10 0 0 1.0 2.0 3.0 4.0 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Fig. 3 - Pulse Waveform Fig. 6 - Maximum Non-Repetitive Forward Surge Current Unidirectional Only Revision: 30-Jun-2021 Document Number: 88390 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMAJ5.0A thru SMAJ188CA www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMA (DO-214AC) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Revision: 30-Jun-2021 Document Number: 88390 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000
SMAJ75AHE3/61
物料型号:SMAJ5.0A至SMAJ188CA

器件简介:这些是Vishay General Semiconductor生产的Surface-Mount TRANSZORB®瞬态电压抑制二极管,具有低剖面封装,适合自动放置,玻璃钝化芯片结构,符合RoHS标准,无卤素,适用于汽车应用。

引脚分配:SMA(DO-214AC)封装,带有标记带的一端为阴极(单向),无标记带的为阳极(双向)。

参数特性: - 单向和双向电压阻断范围:6.40V至231V - 工作最大电压(VWM):5.0V至188V - 峰值脉冲功率(PPPM):400W(300W在78V以上) - 功耗(Po):3.3W - 峰值浪涌电流(IFSM):40A - 最大工作温度(T max.):150°C

功能详解:这些瞬态电压抑制二极管具有出色的钳位能力,响应时间非常快,增量浪涌电阻低,适用于保护敏感电子设备免受由感应负载切换和照明引起的电压瞬态影响。

应用信息:适用于消费电子、计算机、工业、汽车和电信领域的IC、MOSFET、传感器信号线的电压瞬态保护。

封装信息:SMA(DO-214AC)封装,符合UL 94 V-0可燃性等级,有RoHS合规的商业级和AEC-Q101认证的版本。
SMAJ75AHE3/61 价格&库存

很抱歉,暂时无法提供与“SMAJ75AHE3/61”相匹配的价格&库存,您可以联系我们找货

免费人工找货