SMCG10A-E3/57T

SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • • • • • • • • Low profile package Ideal for automated placement Glass passivated chip junction Available in unidirectional and bidirectional Excellent clamping capability Very fast response time Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SMCG (DO-215AB) PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS VBR unidirectional 6.40 V to 231 V VBR bidirectional 6.40 V to 231 V VWM 5.0 V to 188 V PPPM 1500 W PD 6.5 W IFSM (unidirectional only) 200 A TJ max. 150 °C Polarity Unidirectional, bidirectional Package SMCG (DO-215AB) DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. SMCG188CA). Electrical characteristics apply in both directions. Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: SMCG (DO-215AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, industrial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) PARAMETER PPPM 1500 W Peak pulse current with a 10/1000 μs waveform (1) IPPM See next table A Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 200 A Power dissipation on infinite heatsink, TA = 50 °C PD 6.5 W Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 17-Sep-2021 Document Number: 88457 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE MODIFIED GULL WING (+)SMCG5.0A (5) (+)SMCG6.0A (+)SMCG6.5A (+)SMCG7.0A (+)SMCG7.5A (+)SMCG8.0A (+)SMCG8.5A (+)SMCG9.0A (+)SMCG10A (+)SMCG11A (+)SMCG12A (+)SMCG13A (+)SMCG14A (+)SMCG15A (+)SMCG16A (+)SMCG17A (+)SMCG18A (+)SMCG20A (+)SMCG22A (+)SMCG24A (+)SMCG26A (+)SMCG28A (+)SMCG30A (+)SMCG33A (+)SMCG36A (+)SMCG40A (+)SMCG43A (+)SMCG45A (+)SMCG48A (+)SMCG51A (+)SMCG54A (+)SMCG58A (+)SMCG60A (+)SMCG64A (+)SMCG70A (+)SMCG75A (+)SMCG78A (+)SMCG85A (+)SMCG90A (+)SMCG100A (+)SMCG110A (+)SMCG120A (+)SMCG130A (+)SMCG150A (+)SMCG160A (+)SMCG170A SMCG188A DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) UNI BI MIN. MAX. GDE GDG GDK GDM GDP GDR GDT GDV GDX GDZ GEE GEG GEK GEM GEP GER GET GEV GEX GEZ GFE GFG GFK GFM GFP GFR GFT GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHP GHR GHS GDE GDG BDK GDM BDP BDR BDT BDV BDX GDZ BEE GEG BEK BEM GEP GER BET BEV BEX BEZ BFE BFG BFK BFM BFP BFR BFT GFV GFX GFZ GGE GGG GGK GGM GGP GGR GGT GGV GGX GGZ GHE GHG GHK GHM GHP GHR GHS 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 209 7.07 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 159 185 197 209 231 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 188 1000 1000 500 200 100 50 20 10 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 163.0 145.6 133.9 125.0 116.3 110.3 104.2 97.4 88.2 82.4 75.4 69.8 64.7 61.5 57.7 54.3 51.4 46.3 42.3 38.6 35.6 33.0 31.0 28.1 25.8 23.3 21.6 20.6 19.4 18.2 17.2 16.0 15.5 14.6 13.3 12.4 11.9 10.9 10.3 9.3 8.5 7.8 7.2 6.2 5.8 5.5 4.6 9.20 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93 96 103 113 121 126 137 146 162 177 193 209 243 259 275 328 Notes (1) Pulse test: t ≤ 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bidirectional types having V WM of 10 V and less, the ID limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bidirectional SMCG5.0CA, the maximum V BR is 7.25 V (6) V = 3.5 V at I = 100 A (unidirectional only) F F (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both unidirectional and bidirectional devices Revision: 17-Sep-2021 Document Number: 88457 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient (1) Typical thermal resistance, junction to lead SYMBOL VALUE UNIT RθJA RθJL 75 15 °C/ W Note (1) Measured on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.211 0.211 0.211 0.211 57T 9AT 57T 9AT 850 3500 850 3500 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel SMCG5.0A-E3/57T SMCG5.0A-E3/9AT SMCG5.0AHE3/57T (1) SMCG5.0AHE3/9AT (1) Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 10 1 0.31 x 0.31" (8.0 x 8.0 mm) Copper Pad Areas 0.1 0.1 µs TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 4.0 20 000 Measured at Zero Bias 10 000 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 75 50 25 0 1000 VR, Measured at Stand-Off Voltage VWM 100 Uni-Directional Bi-Directional TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0 25 50 75 100 125 150 175 200 1 10 100 400 TJ - Initial Temperature (°C) VWM - Reverse Stand-Off Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance Uni-Directional Revision: 17-Sep-2021 Document Number: 88457 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMCG5.0A thru SMCG188CA www.vishay.com Vishay General Semiconductor 200 Peak Forward Surge Current (A) Transient Thermal Impedance (°C/W) 100 10 1.0 0.1 0.001 0.01 0.1 1 10 100 100 TJ = TJ max. 8.3 ms Single Half Sine-Wave 10 1000 10 1 100 tp - Pulse Duration (s) Number of Cycles at 60 Hz Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current Unidirectional Use Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMCG (DO-215AB) Mounting Pad Layout Cathode Band 0.310 (7.87) 0.245 (6.22) 0.220 (5.59) 0.125 (3.17) 0.115 (2.92) 0.125 (3.17) 0.050 (1.27) 0.280 (7.11) 0.260 (6.60) 0.016 (0.41) 0.006 (0.15) 0.008 (0.20) 0.002 (0.05) 0.095 (2.41) 0.075 (1.90) 0.058 (1.47) 0.038 (0.97) 0.020 (0.51) Max. 0.040 (1.02) 0.024 (0.61) Seating Plane 0.400 (10.16) 0.380 (9.64) Revision: 17-Sep-2021 Document Number: 88457 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000