TLHY6205

Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors High Efficiency LED, Ø 5 mm Tinted Non-Diffused Package FEATURES • Choice of three bright colors • Standard T-1¾ package • Small mechanical tolerances • Suitable for DC and high peak current • Small viewing angle • Luminous intensity categorized 19224 • Yellow and green color categorized DESCRIPTION • TLH.620. without stand-offs The TLH.620. series was developed for standard applications like general indicating and lighting purposes. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 It is housed in a 5 mm tinted non-diffused plastic package. The small viewing angle of these devices provides a high brightness. APPLICATIONS Several selection types with different luminous intensities are offered. All LEDs are categorized in luminous intensity groups. The green and yellow LEDs are categorized additionally in wavelength groups. • Off/on indicator • Status lights • Background illumination • Readout lights • Maintenance lights That allows users to assemble LEDs with uniform appearance. • Legend light PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: 5 mm • Product series: standard • Angle of half intensity: ± 14° PARTS TABLE PART TLHR6200-CS12 TLHR6205 TLHY6200-CS12Z LUMINOUS INTENSITY (mcd) COLOR Red at IF (mA) MIN. TYP. MAX. 10 50 - WAVELENGTH (nm) at IF (mA) MIN. TYP. MAX. 10 612 - 630 10 FORWARD VOLTAGE at IF (V) TECHNOLOGY (mA) MIN. TYP. MAX. - 2 3 20 GaAsP on GaP Red 25 70 - 10 612 - 630 10 - 2 3 20 GaAsP on GaP Yellow 10 50 - 10 581 - 594 10 - 2.4 3 20 GaAsP on GaP TLHG6200 Green 16 40 - 10 562 - 575 10 - 2.4 3 20 GaP on GaP TLHG6200-CS12 Green 16 40 - 10 562 - 575 10 - 2.4 3 20 GaP on GaP Rev. 2.3, 20-Sep-2021 Document Number: 83218 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLHR620., TLHY620., TLHG620. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 65 °C IF 30 mA tp ≤ 10 μs IFSM 1 A Tamb ≤ 65 °C PV 100 mW Reverse voltage DC forward current Surge forward current Power dissipation UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -55 to +100 °C Tsd 260 °C RthJA 350 K/W Junction temperature t ≤ 5 s, 2 mm from body Soldering temperature Thermal resistance junction-to-ambient OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHR620., RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLHR6200 IV 10 50 - mcd TLHR6205 lV 25 70 - Luminous intensity (1) IF = 10 mA Dominant wavelength IF = 10 mA λd 612 - 630 nm Peak wavelength IF = 10 mA λp - 635 - nm Angle of half intensity IF = 10 mA ϕ - ± 14 - ° Forward voltage IF = 20 mA VF - 2 3 V IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmin./IVmax. ≤ 0.5 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHY620., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 10 mA TLHY6200 IV 10 50 - mcd Dominant wavelength IF = 10 mA λd 581 - 594 nm Peak wavelength IF = 10 mA λp - 585 - nm Angle of half intensity IF = 10 mA ϕ - ± 14 - ° Forward voltage IF = 20 mA VF - 2.4 3 V IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmin./IVmax. ≤ 0.5 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHG620., GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 10 mA TLHG6200 IV 16 40 - mcd Dominant wavelength IF = 10 mA λd 562 - 575 nm Peak wavelength IF = 10 mA λp - 565 - nm Angle of half intensity IF = 10 mA ϕ - ± 14 - ° Forward voltage IF = 20 mA VF - 2.4 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. ≤ 0.5 Rev. 2.3, 20-Sep-2021 Document Number: 83218 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 1000 IF - Forward Current (mA) IF - Forward Current (mA) red 50 40 30 20 10 0 0 95 10046 100 1 0.1 20 40 60 80 100 0 0.05 0.1 100 1 0.2 0.5 10 95 10025 0.1 1 10 IV rel - Relative Luminous Intensity 0° 10° IF = 10 mA 40° 0.9 50° 0.8 60° 70° 0.7 80° 0.4 0.2 0 0.2 0 20° 1.0 0.4 0.6 95 10044 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 2.3, 20-Sep-2021 0.4 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature 30° 0.6 0.8 95 10027 Fig. 2 - Forward Current vs. Pulse Length 10 1.2 100 tp - Pulse Length (ms) 8 red 0 1 0.01 6 1.6 IV rel - Relative Luminous Intensity 0.02 IV rel - Relative Luminous Intensity IF - Forward Current (mA) Tamb ≤ 85 °C 4 Fig. 4 - Forward Current vs. Forward Voltage 10 000 tp/T = 0.01 2 VF - Forward Voltage (V) 95 10026 Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature 1000 tp/T = 0.001 tp = 10 µs 10 2.4 red 2.0 1.6 1.2 0.8 0.4 95 10321 0 10 1 20 0.5 50 0.2 100 200 0.1 0.05 500 IF (mA) 0.02 tp/T Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Document Number: 83218 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. Vishay Semiconductors 10 red 1 0.1 10 1.2 0.8 0.4 IF = 10 mA 0 100 IF - Forward Current (mA) 95 10029 20 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10031 Fig. 7 - Relative Luminous Intensity vs. Forward Current Fig. 10 - Relative Luminous Intensity vs. Ambient Temperature 1.2 2.4 Ispec - Specific Luminous Intensity IV rel - Relative Luminous Intensity yellow 0 0.01 1 red 1.0 0.8 0.6 0.4 0.2 0 590 610 630 650 670 IV rel - Relative Luminous Intensity yellow 100 tp/T = 0.001 tp = 10 µs 10 1 0.1 95 10030 4 6 8 10 VF - Forward Voltage (V) Fig. 9 - Forward Current vs. Forward Voltage Rev. 2.3, 20-Sep-2021 1.2 0.8 0.4 0 10 1 20 0.5 50 0.2 100 200 0.1 0.05 500 0.02 IF (mA) tp/T Fig. 11 - Relative Luminous Intensity vs. Forward Current/Duty Cycle 1000 2 1.6 95 10260 Fig. 8 - Relative Intensity vs. Wavelength 0 yellow 2.0 690 λ - Wavelength (nm) 95 10040 IF - Forward Current (mA) 1.6 IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity www.vishay.com 10 yellow 1 0.1 0.01 1 95 10033 10 100 IF - Forward Current (mA) Fig. 12 - Relative Luminous Intensity vs. Forward Current Document Number: 83218 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors Ispec - Specific Luminous Intensity 1.2 yellow Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0 2.4 green 2.0 1.6 1.2 0.8 0.4 0 550 570 590 610 650 630 λ - Wavelength (nm) 95 10039 Fig. 13 - Relative Intensity vs. Wavelength 10 20 50 100 200 95 10263 1 0.5 0.2 0.1 0.05 Fig. 16 - Specific Luminous Intensity vs. Forward Current IV rel - Relative Luminous Intensity IF - Forward Current (mA) 1000 green 100 tp/T = 0.001 tp = 10 µs 10 1 0.1 0 2 95 10034 4 6 8 green 1 0.1 1 95 10037 Fig. 14 - Forward Current vs. Forward Voltage 10 100 IF - Forward Current (mA) Fig. 17 - Relative Luminous Intensity vs. Forward Current 1.6 1.2 green green 1.0 1.2 Irel - Relative Intensity IV rel - Relative Luminous Intensity 10 10 VF - Forward Voltage (V) 500 IF (mA) 0.02 tp/T 0.8 0.4 IF = 10 mA 0 0.6 0.4 0.2 0 0 95 10035 0.8 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 15 - Relative Luminous Intensity vs. Ambient Temperature Rev. 2.3, 20-Sep-2021 520 95 10038 540 560 580 600 620 λ - Wavelength (nm) Fig. 18 - Relative Intensity vs. Wavelength Document Number: 83218 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Ø 5.8 ± 0.15 A (4.1) < 0.7 7.7 ± 0.15 34.9 ± 0.55 8.7 ± 0.3 R 2.49 (sphere) Area not plane Ø 5 ± 0.15 + 0.2 1 min. 0.6 - 0.1 technical drawings according to DIN specifications + 0.15 0.5 - 0.05 + 0.15 0.5 - 0.05 2.54 nom. 6.544-5259.01-4 Issue: 4; 19.05.09 96 12123 TAPE REEL 355 52 max. Diodes: anode before cathode Phototransistors: emitter before collector Code 21 90 Adhesive tape Identification label Reel Diodes: cathode before anode Phototransistors: collector before emitter Code 12 30 Paper Identification label: Vishay/type/group/tape code/production code/quantity Fig. 19 - Reel Dimensions 48 45 Tape 94 8671 948641 Fig. 20 - LED in Tape AS12 = cathode leaves tape first AS21 = anode leaves tape first Rev. 2.3, 20-Sep-2021 Document Number: 83218 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs TLHR620., TLHY620., TLHG620. www.vishay.com Vishay Semiconductors AMMOPACK Tape feed Label C A B 94 8667-1 Fig. 21 - Tape Direction Note • The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: “+” for anode first, or “-” for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN TAPE DIMENSIONS in millimeters ±2 ±1 9 ± 0.5 12 ± 0.3 18 +1 - 0.5 0.3 ± 0.2 12.7 ± 1 0.9 max. Ø 4 ± 0.2 2.54 + 0.6 - 0.1 5.08 ± 0.7 6.35 ± 0.7 12.7 ± 0.2 Measure limit over 20 index-holes: ± 1 Quantity per: Reel (Mat.-no. 1764) 1000 94 8172 Rev. 2.3, 20-Sep-2021 Option Dim. “H” ± 0.5 mm CS 22.0 Document Number: 83218 7 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000