TPC30CAHM3/H

TPC11CA thru TPC36CA www.vishay.com Vishay General Semiconductor Surface Mount PAR® Transient Voltage Suppressors Bidirectional 1500 W TVS in TO-277 (SMPC) Package FEATURES eSMP ® Series • Junction passivation optimized PAR® design • TJ = 185 °C capability suitable for high reliability and automotive requirement • Very low profile - typical height of 1.1 mm • Ideal for automated placement • Bidirectional • Excellent clamping capability • Low leakage current • Very fast response time SMPC (TO-277A) • AEC-Q101 qualified - Automotive ordering code: base P/NHM3 Terminal 1 • Meet MSL level 1, per J-STD-020, LF maximum peak of 260 °C Terminal 2 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for automotive, consumer, computer, industrial, and telecommunication. VWM 9.4 V to 30.8 V VBR (Bi-directional) 11 V to 36 V PPPM 1500 W MECHANICAL DATA TJ max. 185 °C Polarity Bidirectional Package SMPC (TO-277A) Case: SMPC (TO-277A) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Note • All electrical characteristics are only applicable when two identical polarity terminals are connected. Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test per Polarity: no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER Peak power dissipation with a 10/1000 μs waveform (1) Peak pulse current with a 10/1000 μs waveform (1) Operating junction and storage temperature range SYMBOL VALUE UNIT PPPM 1500 W IPPM See next table A TJ, TSTG -65 to +185 °C Note (1) Non-repetitive current pulse per fig.3 and derated above T = 25 °C A Revision: 17-Sep-2021 Document Number: 87649 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC11CA thru TPC36CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BI BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. STAND-OFF VOLTAGE VWM (V) TEST CURRENT IT (mA) MAX. MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) TPC11CA BAF 10.5 11.6 1.0 9.40 5.0 96.2 15.6 TPC12CA BAG 11.4 12.6 1.0 10.2 2.0 89.8 16.7 TPC13CA BAH 12.4 13.7 1.0 11.1 2.0 82.4 18.2 TPC15CA BAI 14.3 15.8 1.0 12.8 1.0 70.8 21.2 TPC16CA BAJ 15.2 16.8 1.0 13.6 1.0 66.7 22.5 TPC18CA BAK 17.1 18.9 1.0 15.3 1.0 59.5 25.2 TPC20CA BAL 19.0 21.0 1.0 17.1 1.0 54.2 27.7 TPC22CA BAM 20.9 23.1 1.0 18.8 1.0 49.0 30.6 TPC24CA BAN 22.8 25.2 1.0 20.5 1.0 45.2 33.2 TPC27CA BAO 25.7 28.4 1.0 23.1 1.0 40.0 37.5 TPC30CA BAP 28.5 31.5 1.0 25.6 1.0 36.2 41.4 TPC33CA BAQ 31.4 34.7 1.0 28.2 1.0 32.8 45.7 TPC36CA BAR 34.2 37.8 1.0 30.8 1.0 30.1 49.9 Notes • All terms and symbols are consistent with ANSI/IEEE C62.35 (1) V BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig.3 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE TPC11CAHM3/H (1) 0.10 H 1500 7" diameter plastic tape and reel TPC11CAHM3/I (1) 0.10 I 6500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 17-Sep-2021 Document Number: 87649 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC11CA thru TPC36CA www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted) 150 TA = 25 °C Non-repetitive pulse waveform shown in Fig.3 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 10 1 0.1 100 Peak value IPPM Half value - IPP/2 IPPM 50 10/1000 μs waveform as defined by R.E.A. td 0 10 100 1000 10 000 0 td - Pulse Width (μs) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 tp - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 10 000 100 CJ - Junction Capacitance (pF) Peak Pulse Power (P PP) or Current (I PP) Derating in Percentage,% TJ = 25 °C pulse width (td) is defined as the point where the peak tr = 10 μs 75 50 25 0 Measured at zero bias 1000 Measured at stand-off voltage, VWM 100 TJ = 25 °C f = 1.0 MHz 10 0 50 100 150 200 TJ - Initial Temperature (°C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature 10 100 VBR - Breakdown Voltage (V) Fig. 4 - Typical Junction Capacitance Note • Fig.1 power calculation is based on IPPM, times defined maximum clamping voltage by pulse width. Revision: 17-Sep-2021 Document Number: 87649 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC11CA thru TPC36CA www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPC (TO-277A) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 17-Sep-2021 Document Number: 87649 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000