TPSMP18AHM3/85A

TPSMP6.8 thru TPSMP43A www.vishay.com Vishay General Semiconductor High Power Density Surface Mount PAR® Transient Voltage Suppressors FEATURES ® • Junction passivation optimized design passivated anisotropic rectifier technology eSMP Series • TJ = 185 °C capability suitable for high reliability and automotive requirement • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Uni-direction only • Excellent clamping capability DO-220AA (SMP) • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V PPPM (for VBR 6.8 V) 250 W PPPM (for VBR 7.5 V to 12 V) 300 W PPPM (for VBR 13 V to 43 V) 400 W VWM 5.5 V to 36.8 V PD 2.5 W IFSM 40 A • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA TYPICAL APPLICATIONS Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ..., revision code only applicable for part number with ± 5 % tolerance) Protection for ICs, drive transistors, signal lines of sensor units, and electronic units in consumer, computer, industrial, and automotive applications. Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test TJ max. 185 °C Polarity Uni-directional Package DO-220AA (SMP) per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (fig. 1 and 3) (1)(2) PPPM See table next page W Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1) IPPM See table next page A PD 2.5 W IFSM 40 A Power dissipation on infinite heatsink, TA = 75 °C Peak forward surge current 10 ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at 25 A (3) Operating junction and storage temperature range VF 2.5 V TJ, TSTG -65 to +185 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on PCB with 5.0 mm x 5.0 mm copper pads attached to each terminal (3) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 22-Jul-16 Document Number: 88471 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPSMP6.8 thru TPSMP43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) DEVICE TYPE MAXIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM REVERSE PEAK DEVICE BREAKDOWN CLAMPING TEMPERATURE TEST STAND-OFF REVERSE LEAKAGE PULSE VOLTAGE MARKING VOLTAGE COEFFICIENT CURRENT VOLTAGE LEAKAGE AT VWM SURGE VBR (1) AT IT AT VWM OF VBR AT IPPM IT (mA) VWM (V) CODE CURRENT T = 150 °C J (V) IR (μA) VC (V) (%/°C) IPPM (2) (A) ID (μA) MIN. MAX. TPSMP6.8 ADP 6.12 7.48 10.0 5.50 300 1000 23.2 10.8 0.057 TPSMP6.8A AEP 6.45 7.14 10.0 5.80 300 1000 23.8 10.5 0.057 TPSMP7.5 AFP 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 TPSMP7.5A AGP 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 TPSMP8.2 AHP 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 TPSMP8.2A AKP 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 TPSMP9.1 ALP 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 TPSMP9.1A AMP 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TPSMP10 ANP 9.00 11.0 1.0 8.10 5.0 20.0 20.0 15.0 0.073 TPSMP10A APP 9.50 10.5 1.0 8.55 5.0 20.0 20.7 14.5 0.073 TPSMP11 AQP 9.90 12.1 1.0 8.92 2.0 10.0 18.5 16.2 0.075 TPSMP11A ARP 10.5 11.6 1.0 9.40 2.0 10.0 19.2 15.6 0.075 TPSMP12 ASP 10.8 13.2 1.0 9.72 1.0 5.0 17.3 17.3 0.076 TPSMP12A ATP 11.4 12.6 1.0 10.2 1.0 5.0 18.0 16.7 0.078 TPSMP13 AUP 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 TPSMP13A AVP 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TPSMP15 AWP 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 TPSMP15A AXP 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TPSMP16 AYP 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 TPSMP16A AZP 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TPSMP18 BDP 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 TPSMP18A BEP 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TPSMP20 BFP 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 TPSMP20A BGP 19.0 21.0 1.0 17.1 1.0 5.0 14.4 27.7 0.090 TPSMP22 BHP 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 TPSMP22A BKP 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TPSMP24 BLP 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.7 0.094 TPSMP24A BMP 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TPSMP27 BNP 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.100 TPSMP27A BPP 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TPSMP30 BQP 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 TPSMP30A BRP 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TPSMP33 BSP 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 TPSMP33A BTP 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TPSMP36 BUP 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 TPSMP36A BVP 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TPSMP39 BWP 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 TPSMP39A BXP 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TPSMP43 BYP 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 TPSMP43A BZP 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Notes (1) V BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 Revision: 22-Jul-16 Document Number: 88471 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPSMP6.8 thru TPSMP43A www.vishay.com Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE TPSMP6.8AHM3/84A (1) 0.024 84A 3000 7" diameter plastic tape and reel TPSMP6.8AHM3/85A (1) 0.024 85A 10 000 13" diameter plastic tape and reel (1) 0.024 H 3000 7" diameter plastic tape and reel 0.024 I 10 000 13" diameter plastic tape and reel TPSMP6.8AHM3_A/H TPSMP6.8AHM3_A/I (1) Note (1) Automotive grade  RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted) 150 PPPM - Peak Pulse Power (kW) TPSMP13 thru TPSMP43A TPSMP7.5 thru TPSMP12A 1 TPSMP6.8 0.1 tr = 10 µs Peak Value IPPM 100 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1 100 10 1000 10 000 0 1.0 3.0 2.0 td - Pulse Width (µs) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 4.0 10 000 100 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) of Current (IPP) Derating in Percentage (%) 0.01 0.1 IPPM - Peak Pulse Current, % IRSM 10 75 VR, measured at Zero Bias 1000 50 25 VR measured at Stand-Off Voltage, VWM 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0 0 25 50 75 100 125 150 175 200 1 10 TJ - Initial Temperature (°C) VWM - Reverse Stand-Off Voltage (V) Fig. 2 - Pulse Derating Curve Fig. 4 - Typical Junction Capacitance 100 Revision: 22-Jul-16 Document Number: 88471 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPSMP6.8 thru TPSMP43A www.vishay.com Vishay General Semiconductor 3.0 TA = TL, on Infinite Heatsink 35 PM(AV) - Steady State Power Dissipation (W) Peak Forward Surge Current (A) 40 30 25 20 15 10 5 0 2.5 2.0 FR-4 PCB, on Vishay minimum recommended Pad Layout 1.5 1.0 0.5 0.0 1 100 10 0 25 50 75 100 125 150 175 200 Number of Cycles at 50 Hz TJ - Initial Temperature (°C) Fig. 5 - Maximum Peak Forward Surge Current Fig. 6 - Steady State Power Derating Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF. Cathode Band 0.036 (0.91) 0.024 (0.61) 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.025 (0.635) 0.030 (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) 0.100 (2.54) 0.050 (1.27) 0.018 (0.45) 0.006 (0.15) Revision: 22-Jul-16 Document Number: 88471 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000