TS9410VA
www.vishay.com
Vishay Semiconductors
Specification of High Power IR Emitting Diode Chip
FEATURES
• Package type: chip
• Package form: single chip
• Technology: surface emitter
• Dimensions chip (L x W x H in mm):
0.250 x 0.250 x 0.17
• Peak wavelength: = 940 nm
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
TS9410VA is a high power infrared, 940 nm surface emitting
diode in GaAlAs technology with high radiant power and
high speed. Polarity configuration is “n-up”.
GENERAL INFORMATION
The datasheet is based on Vishay optoelectronics sample testing under certain predetermined and assumed conditions, and is
provided for illustration purpose only. Customers are encouraged to perform testing in actual proposed packaged and used
conditions. Vishay optoelectronics die products are tested using Vishay optoelectronics based quality assurance procedures
and are manufactured using Vishay optoelectronics established processes. Estimates such as those described and set forth in
this datasheet for semiconductor die will vary depending on a number of packaging, handling, use, and other factors. Therefore
sold die may not perform on an equivalent basis to standard package products.
PRODUCT SUMMARY
COMPONENT
e (mW)
(deg)
p (nm)
tr (ns)
12
55
940
10
PACKAGING
REMARKS
PACKAGE FORM
wafer sawn on foil
MOQ: 25 000 pcs
chip
TS9410VA
Note
• Test condition see table “Basic Characteristics”
ORDERING INFORMATION
ORDERING CODE
TS9410VA-SF-F
Note
• MOQ: minimum order quantity
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Forward current
Reverse voltage
Surge forward current
Junction temperature
tp/T = 0.1, tp = 100 μs
SYMBOL
VALUE
UNIT
IF
70
mA
VR
5
V
IFSM
1
A
Tj
100
°C
Tamb
-40 to +100
°C
Storage temperature range chip
Tstg1
-40 to +120
°C
Storage temperature range on foil
Tstg2
-40 to +40
°C
Operating temperature range
Rev. 1.0, 19-Dec-14
Document Number: 84291
1
For technical questions, contact: optochipsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TS9410VA
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Forward voltage
TEST CONDITION
SYMBOL
IF = 20 mA, tp = 20 ms
VF
IF = 70 mA, tp = 20 ms
VF
IF = 50 mA
e
IR = 5 μA
VR
10
IF = 50 mA
50
55
60
925
940
950
Radiant power (1)
Reverse voltage
Angle of half intensity
MIN.
TYP.
MAX.
UNIT
1.4
V
1.6
V
12
mW
V
deg
Peak wavelength
IF = 50 mA
p
Spectral bandwidth
IF = 50 mA
0.5
30
nm
Rise time / fall time
IF = 100 mA
tr , tf
10
ns
nm
Note
(1) The measurements are based on samples of die which are mounted on a TO-18 gold header without resin coating
0°
1001
80
10°
20°
30°
IF = 50 mA
IF = 30 mA
0.75
70
60
50
0.5
40
30
0.25
20
10
00
650
800
850
750900
950850 1000
0.9
50°
0.8
60°
70°
0.7
950
1050
80°
0.6
0.4
0.2
0
94 8013
Wavelength (nm)
λλ- -Wavelength
(nm)
21776-1
40°
1.0
ϕ - Angular Displacement
90
Ie, rel - Relative Radiant Sensitivity
Ie, rel Φ- e,Relative
Radiant Intensity (%)
rel - Relative Radiant Power
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Relative Spectral Emission
e rel = f ()
Fig. 2 - Radiant Characteristics
Irel = f()
MECHANICAL DIMENSIONS
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Length of chip edge (x-direction)
Lx
0.25
mm
Length of chip edge (y-direction)
Ly
0.25
mm
Die height
H
0.17
mm
Diameter of bondpad
d
0.100
mm
ADDITIONAL INFORMATION
Frontside metallization, cathode
gold alloy
Backside metallization, anode
gold alloy
Dicing
Die bonding technology
sawing
epoxy bonding
Note
• All chips are checked in accordance with the Vishay Semiconductor, specification of visual inspection FVOV6870.
The visual inspection shall be made in accordance with the “specification of visual inspection as referenced”. The visual inspection of chip
backside is performed with stereo microscope with incident light and 40x to 80x magnification.
The quality inspection (final visual inspection) is performed by production. An additional visual inspection step as special release procedure
by QM is not installed.
Rev. 1.0, 19-Dec-14
Document Number: 84291
2
For technical questions, contact: optochipsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TS9410VA
www.vishay.com
Vishay Semiconductors
HANDLING AND STORAGE CONDITIONS
• The hermetically sealed shipment lots shall be opened in temperature and moisture controlled cleanroom environment only.
It is mandatory to follow the rules for disposition of material that can be hazardous for humans and environment.
• Product must be handled only at ESD safe workstations. Standard ESD precautions and safe work environments are as
defined in MIL-HDBK-263.
• Singulated die are not to be handled with tweezers. A vacuum wand with non metallic ESD protected tip should be used.
PACKING
Chips are fixed on adhesive foil. Upon request the foils can be mounted on plastic frame or disco frame. For shipment, the
wafers are arranged to stacks and hermetically sealed in plastic bags to ensure protection against environmental influence
(humidity and contamination).
Use for recycling reliable operators only. We can help getting in touch with your nearest sales office. By agreement we will take
back packing material, if it is sorted. You will have to bear the costs of transport. We will invoice you for any costs incurred for
packing material that is returned unsorted or which we are not obliged to accept.
Rev. 1.0, 19-Dec-14
Document Number: 84291
3
For technical questions, contact: optochipsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000