TVR06D thru TVR06K
www.vishay.com
Vishay General Semiconductor
Glass Passivated Junction Fast Switching Rectifier
FEATURES
• Superectifier structure for high reliability condition
SUPERECTIFIER®
• Cavity-free glass-passivated junction
• Fast switching high efficiency
• Low leakage current
• High forward surge capability
• Meets environmental standard MIL-S-19500
DO-204AL (DO-41)
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
IF(AV)
0.6 A
VRRM
200 V to 800 V
IFSM
30 A
trr
300 ns
IR
10 μA
VF at IF = 0.6 A
1.4 V
TJ max.
175 °C
Package
DO-204AL (DO-41)
Diode variations
Single die
For use in fast switching rectification of power supply,
inverters, converters and freewheeling diodes for consumer
and telecommunication.
MECHANICAL DATA
Case: DO-204AL, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, and commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TVR06D
TVR06G
TVR06J
TVR06K
UNIT
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
Maximum DC blocking voltage
VDC
200
400
600
800
V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 55 °C
IF(AV)
0.6
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC® method)
IFSM
30
A
Maximum full load reverse current, full cycle average
0.375" (9.5 mm) lead length TA = 55 °C
IR(AV)
100
μA
TJ, TSTG
-65 to +175
°C
Operating junction and storage temperature range
Revision: 07-Nov-16
Document Number: 88921
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TVR06D thru TVR06K
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TVR06D
TVR06G
VF
TVR06J
TVR06K
UNIT
Maximum instantaneous forward voltage
0.6 A
Maximum DC reverse current
at rated DC blocking voltage
TA = 25 °C
TA = 150 °C
IR
Maximum reverse recovery time
IF = 2 mA, VR = 15 V,
Irr = 0.1 A
trr
300
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
15
pF
1.4
V
10
μA
200
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
RJA
TVR06D
TVR06G
(1)
TVR06J
TVR06K
55
UNIT
°C/W
Note
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TVR06J-E3/54
0.336
54
5500
13" diameter paper tape and reel
TVR06J-E3/73
0.336
73
3000
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
30
Resistive or Inductive Load
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
(JEDEC Method)
0.7
Forward Surge Current (A)
Average Forward Rectified Current (A)
0.8
0.6
0.5
0.4
0.3
0.2
20
10
0.1
0.375" (9.5 mm) Lead Length
0
0
0
25
50
75
100
125
150
175
1
10
100
Ambient Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current
Revision: 07-Nov-16
Document Number: 88921
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TVR06D thru TVR06K
www.vishay.com
Vishay General Semiconductor
100
1
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
0.1
0.01
0.4
10
1
0.6
0.8
1.0
1.4
1.2
1.6
100
10
1
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
100
100
10
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (µA)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Junction Capacitance (pF)
Instantaneous Forward Current (A)
10
TJ = 125 °C
1
TJ = 75 °C
0.1
TJ = 25 °C
20
40
60
80
1
0.1
0.01
0.01
0
10
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
Note
0.026 (0.66)
• Lead diameter is
for suffix “E” part numbers
0.023 (0.58)
Revision: 07-Nov-16
Document Number: 88921
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000