UH3B-E3/9AT

UH3B, UH3C www.vishay.com Vishay General Semiconductor Surface-Mount Ultrafast Rectifier FEATURES • Low profile package • Ideal for automated placement • Oxide planar chip junction • Ultrafast recovery times for high frequency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMC (DO-214AB) Cathode Available • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 Anode • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D TYPICAL APPLICATIONS 3D Models For use in secondary rectification and freewheeling for ultrafast switching speeds of AC/AC and DC/DC converters in high temperature conditions for both consumer and automotive applications. PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 100 V, 150 V IFSM 80 A trr 25 ns VF at IF = 3.0 A 0.75 V TJ max. 175 °C Package SMC (DO-214AB) Circuit configuration Single MECHANICAL DATA Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, .....) Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM UH3B UH3C HB HC 100 150 UNIT V IF(AV) (1) 2.5 IF(AV) (2) 3.0 IFSM 80 A TJ, TSTG -55 to +175 °C A Notes (1) Free air, mounted on recommended copper pad area (2) Units mounted on PCB with 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pad area Revision: 09-Apr-2020 Document Number: 89109 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, Diodes-Europe@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UH3B, UH3C www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 1.5 A TA = 25 °C IF = 3.0 A Instantaneous forward voltage VF (1) IF = 1.5 A TA = 125 °C IF = 3.0 A TA = 25 °C Reverse current Rated VR Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A Typical softness factor (tb/ta) Typical reverse recovery current Typical stored charge Typical junction capacitance TA = 125 °C TA = 25 °C IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, lrr = 0.1 IRM Typical reverse recovery time SYMBOL IF = 3.0 A, dI/dt = 200 A/μs, VR = 200 V TA = 125 °C 4.0 V, 1 MHz IR (2) TYP. MAX. 0.85 - 0.95 1.05 0.65 - 0.75 0.90 - 5 15 100 14 25 23 40 UNIT V μA trr ns S 0.2 - IRM 5.0 7.0 A Qrr 60 - nC CJ 42 - pF Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance UH3B UH3C RθJA (1) 95 RθJM (1) 12 UNIT °C/W Note (1) Free air, mounted on recommended copper pad area. Thermal resistance R θJA - junction to ambient, RθJM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE UH3CHE3_A/H (1) 0.236 H 850 7" diameter plastic tape and reel UH3CHE3_A/I (1) 0.236 I 3500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 09-Apr-2020 Document Number: 89109 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, Diodes-Europe@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UH3B, UH3C www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title 3.0 2.5 2.0 1.5 1.0 TM Measured at Mount of Terminal 0.5 TJ = 175 °C 100 TJ = 150 °C 10 1000 TJ = 125 °C 1st line 2nd line 2nd line Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Resistive or Inductive Load TJ = 100 °C 1 TJ = 25 °C 100 0.1 0.01 TJ = -40 °C 10 0.001 0 0 25 50 75 100 125 150 175 10 20 30 40 50 60 70 80 90 100 TM - Mount Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 3.0 100 D = 0.3 D = 0.5 2.5 D = 0.2 2.0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 Junction Capacitance (pF) Average Power Loss (W) 10000 1000 3.5 D = 0.1 D = 1.0 1.5 T 1.0 0.5 D = tp/T tp 0 10 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title TJ = 175 °C TJ = 150 °C 10 1000 TJ = 125 °C 1 TJ = 100 °C 100 TJ = 25 °C 0.1 TJ = -40 °C 0.01 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Transient Thermal Impedance (°C/W) 2nd line Instantaneous Forward Current (A) 1000 10000 100 Junction to Ambient 100 10 1 0.001 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 09-Apr-2020 Document Number: 89109 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, Diodes-Europe@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UH3B, UH3C www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Cathode Band Mounting Pad Layout 0.185 (4.69) MAX. 0.246 (6.22) 0.220 (5.59) 0.126 (3.20) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.260 (6.60) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.320 (8.13) REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 09-Apr-2020 Document Number: 89109 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, Diodes-Europe@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: UH3B-E3/57T UH3B-E3/9AT UH3C-E3/57T UH3C-E3/9AT UH3D-E3/57T UH3D-E3/9AT