V20PWM10HM3/I

V20PWM10 www.vishay.com Vishay General Semiconductor High Current Density Surface-Mount TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.47 V at IF = 5 A FEATURES eSMP® Series • Very low profile - typical height of 1.3 mm • Trench MOS Schottky technology K • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency operation 1 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 2 • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 SlimDPAK (TO-252AE) PIN 1 PIN 2 K • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 HEATSINK DESIGN SUPPORT TOOLS click logo to get started TYPICAL APPLICATIONS For use in low voltage high frequency DC/DC converters, freewheeling diodes, and polarity protection applications. Models Available MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 20 A VRRM 100 V IFSM 200 A VF at IF = 20 A (TA = 125 °C) 0.70 V TJ max. 175 °C Package SlimDPAK (TO-252AE) Circuit configuration Single Case: SlimDPAK (TO-252AE) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage V20PWM10 UNIT V20PWM10 VRRM 100 V IF(AV) (1) 20 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 200 A Operating junction temperature range TJ (2) -40 to +175 °C Storage temperature range TSTG -55 to +175 °C Maximum average forward rectified current (Fig. 1) Notes (1) With infinite heatsink (2) The heat generated must be less than the thermal conductivity from junction to ambient: dP /dT < 1/R D J JA Revision: 08-Feb-2019 Document Number: 87698 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20PWM10 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5.0 A IF = 10 A Instantaneous forward voltage TA = 25 °C IF = 20 A VF (1) IF = 5.0 A TA = 125 °C IF = 10 A IF = 20 A VR = 70 V Reverse current Typical junction capacitance MAX. 0.55 - 0.65 - 0.82 0.90 0.47 - 0.58 - 0.70 0.78 TA = 25 °C 0.01 - TA = 125 °C 3 - - 0.2 5 15 1575 - TA = 25 °C VR = 100 V TYP. IR (2) TA = 125 °C 4.0 V, 1 MHz CJ UNIT V mA pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width  5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL V20PWM10 RJA (1)(2) 55 RJM (3) 2.0 UNIT °C/W Notes (1) The heat generated must be less than thermal conductivity from junction-to-ambient: dP /dT < 1/R D J JA (2) Free air, mounted on recommended copper pad area; thermal resistance R JA - junction to ambient (3) Mounted on infinite heat sink; thermal resistance R JM - junction-to-mount ORDERING INFORMATION (Example) PREFERRED P/N BASE QUANTITY DELIVERY MODE V20PWM10-M3/I UNIT WEIGHT (g) PREFERRED PACKAGE CODE 0.20 I 4500 13" diameter plastic tape and reel V20PWM10HM3/I (1) 0.20 I 4500 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 08-Feb-2019 Document Number: 87698 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20PWM10 www.vishay.com Vishay General Semiconductor 25.0 Instantaneous Reverse Current (mA) Average Forward Recti ed Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) TM = 145 °C, RthJM = 2.0 °C/W 20.0 15.0 10.0 TA = 25 °C, RthJA = 55 °C/W 5.0 0 0 25 50 75 100 125 150 100 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C 0.1 0.01 TJ = 25 °C 0.001 175 10 Mount Temperature (°C) 20 30 40 50 60 10 000 14.0 D = 1.0 D = 0.2 8.0 D = 0.1 6.0 T 4.0 2.0 D = tp/T Junction Capacitance (pF) Average Power Loss (W) D = 0.5 10.0 1000 100 10 tp 0.0 1 0 2 4 6 8 0.1 10 12 14 16 18 20 22 24 1 Average Forward Current (A) TJ = 175 °C TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 25 °C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 100 Fig. 5 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) 100 10 Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Instantaneous Forward Current (A) 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 D = 0.3 90 Fig. 4 - Typical Reverse Leakage Characteristics 18.0 12.0 80 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve 16.0 70 100 Junction to Ambient 10 Junction to Mount 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 08-Feb-2019 Document Number: 87698 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20PWM10 www.vishay.com Vishay General Semiconductor Thermal Resistance (°C/W) 80 Epoxy printed circuit board FR4 copper thickness = 70 μm 70 60 50 40 30 20 10 S (cm2) 0 0 1 2 3 4 5 6 7 8 9 10 (cm2) Copper Pad Areas Fig. 7 - Typical Resistance Junction to Ambient vs. Copper Pad Areas PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SlimDPAK (TO-252AE) 0.055 (1.40) 0.047 (1.20) 0.249 (6.32) 0.239 (6.08) 0.016 (0.41) 0.010 (0.25) 0.028 (0.70) 0.012 (0.30) 0.265 (6.72) 0.255 (6.48) 0.370 (9.40) 0.339 (8.60) 0.008 0.000 0.055 0.039 0.090 NOM. (2.29) (0.20) (0.00) (1.40) (1.00) 0.180 NOM. (4.57) Mounting Pad Layout 0.240 MIN. (6.10) 0.224 (5.70) 0.209 (5.30) 0.205 NOM. (5.20) 0.235 MIN. (5.97) 0.386 REF. (9.80) 0.075 MIN. (1.90) 0.035 (0.90) 0.028 (0.70) 0.090 NOM. (2.29) 0.055 MIN. (1.40) Revision: 08-Feb-2019 Document Number: 87698 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000