VLMR335U1V2-GS08

VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors Power SMD LED PLCC-2 FEATURES • Utilizing latest advanced AlInGaP technology • Available in 8 mm tape • Luminous intensity and color categorized per packing unit • Luminous intensity ratio per packing unit IVmax./IVmin. ≤ 1.6 • Thermal resistance R = 400 K/W 19225 DESCRIPTION • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B The VLM.335.. series is an advanced modification of the Vishay VLM.31.. series. It is using the advanced, high efficient AlInGaP/Si chip technology, capable of withstanding a 50 mA drive current. • Preconditioning according to JEDEC® level 2a The package of the VLM.335.. is the PLCC-2. • AEC-Q101 qualified It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Compatible with reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 APPLICATIONS PRODUCT GROUP AND PACKAGE DATA • Traffic signals and signs • Product group: LED • Interior and exterior lighting • Package: SMD PLCC-2 • Dashboard illumination • Product series: power • Indicator and backlighting purposes for audio, video, LCDs switches, symbols, illuminated advertising etc • Angle of half intensity: ± 60° PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. VLMS335T1U2-GS08 Super red 280 390 710 20 626 630 639 20 1.8 2 2.6 20 VLMR335U1V2-GS08 Red 450 560 1120 20 619 625 631 20 1.8 2 2.6 20 AlInGaP on Si AlInGaP on Si VLMK335U1V2-GS08 Amber 450 630 1120 20 611 616 622 20 1.8 2.1 2.6 20 AlInGaP on Si VLMO335U2AA-GS08 Soft orange 560 700 1400 20 600 605 611 20 1.8 2.1 2.6 20 AlInGaP on Si VLMY335U1V2-GS08 Yellow 450 600 1120 20 583 589 594 20 1.8 2.15 2.6 20 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLM.335... PARAMETER TEST CONDITION SYMBOL VALUE Reverse voltage (1) Short term application only VR 5 V DC forward current Tamb ≤ 73 °C (400 K/W) IF 50 mA Power dissipation PV 130 mW Junction temperature Tj 125 °C Tamb -40 to +100 °C Tstg -40 to +100 °C RthJA 400 K/W Operating temperature range Storage temperature range Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.2, 14-Sep-2022 Document Number: 84911 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMS335.., SUPER RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMS335T1U2 IV 280 390 710 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 626 630 639 nm Peak wavelength IF = 20 mA λp - 639 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMR335.., RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMR335U1V2 IV 450 560 1120 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 619 625 631 nm Peak wavelength IF = 20 mA λp - 632 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMK335.., AMBER PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMK335U1V2 IV 450 630 1120 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 611 616 622 nm Peak wavelength IF = 20 mA λp - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 18 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMO335.., SOFT ORANGE PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMO335U2AA IV 560 700 1400 mcd φV/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 600 605 611 nm Peak wavelength IF = 20 mA λp - 611 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 17 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA Rev. 1.2, 14-Sep-2022 Document Number: 84911 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY335.., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMY335U1V2 IV 450 600 1120 mcd φV/IV - 3 - mlm/mcd Luminous intensity Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA λd 583 589 594 nm Peak wavelength IF = 20 mA λp - 591 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA Δλ - 17 - nm Angle of half intensity IF = 20 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF 1.8 2.15 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP AMBER SOFT ORANGE YELLOW MIN. MAX. MIN. MAX. MIN. MAX. 1 611 618 - - - - 2 614 622 600 603 583 586 3 - - 602 605 585 588 4 - - 604 607 587 590 5 - - 606 609 589 592 6 - - 608 611 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD T U V A LIGHT INTENSITY (mcd) OPTIONAL MIN. MAX. 1 280 355 2 355 450 1 450 560 2 560 710 1 710 900 2 900 1120 A 1120 1400 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.2, 14-Sep-2022 Document Number: 84911 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 100 80 Irel - Relative Intensity IF - Max. Permissible Forward Current (mA) 90 70 RthJA = 400 K/W 60 50 40 30 20 1.0 amber soft orange yellow red super red 0.8 0.6 0.4 0.2 10 0 0 25 50 75 100 0 540 560 580 600 620 640 660 680 125 Tamb - Ambient Temperature (°C) 16784 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature 0° 10° 20° 100 0.9 50° 0.8 60° 70° red super red amber 2nd line IF - Forward Current (mA) 40° 1.0 soft orange ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 0.7 λ - Wavelenght (nm) 22184 10 yellow 80° 1 0.6 0.4 0.2 1.7 0 1.9 2.1 2.3 2.5 2.7 V F - Forward Voltage (V) 2nd line 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Fig. 5 - Forward Current vs. Forward Voltage Axis Title 0.10 0.08 tp/T = 0.005 0.05 0.5 0.06 0.04 0.02 0.00 10 10000 1 1000 1st line 2nd line 2nd line IV rel - Relative Luminous Intensity IF - Forward Current (A) 0.12 0.1 100 0.01 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 17044 101 102 tp - Pulse Length (s) Fig. 3 - Forward Current vs. Pulse Length Rev. 1.2, 14-Sep-2022 10 1 10 100 IF - Forward Current (mA) 2nd line Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 84911 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors Axis Title 10000 0.4 super red 0.3 red 1000 amber 0.2 1st line 2nd line 2nd line ΔVF - Change of Forward Voltage (V) 0.5 soft orange 0.1 0 100 yellow -0.1 -0.2 -0.3 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Change of Forward Voltage vs. Ambient Temperature IV rel - Relative Luminous Intensity 2.5 2.0 yellow soft orange amber red 1.5 1.0 super red 0.5 0 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 22188 Δλd - Change Dominant Wavelength (nm) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature 10 8 yellow 6 soft orange 4 2 0 amber red super red -2 -4 -6 -8 -40 22189 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.2, 14-Sep-2022 Document Number: 84911 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 0.9 1.75±0.1 3.5±0.2 0.8 A C Technical drawings according to DIN specifications 2.2 2.8±0.15 Pin identification Dimensions in mm Ø2.4 Drawing-No.: 6.541-5067.02-4 Issue: 5; 23.09.13 +0.15 3 Mounting Pad Layout 4 2.6 (2.8) 1.2 Area covered with solderresist 1.6 (1.9) 4 Dimensions: Reflow and vapor phase (wave soldering) PACKING INFORMATION PART VLMx335xxxx-GS08 Rev. 1.2, 14-Sep-2022 TAPE AND REEL 7500 (5 x 1500) Document Number: 84911 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLMx335..-SERIES) SOLDERING PROFILE Adhesive tape IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Blister tape 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-3 Fig. 12 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) Component cavity 22972 TTW Soldering (according to CECC00802) 300 Lead temperature 250 4.0 3.6 5.75 5.25 3.6 3.4 8.3 7.7 2nd line Temperature (°C) Cathode 2.2 2.0 100 °C to 130 °C 100 100 50 4.1 3.9 4.1 3.9 16 025 0 948626-1 2.5 1.5 50 100 150 200 250 Time (s) Fig. 13 - Double Wave Soldering of Opto Devices (all Packages) 10.0 9.0 120° 4.5 3.5 10 0 Fig. 10 - Tape Dimensions in mm for PLCC-2 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) ca. 5 K/s Forced cooling 0.25 2.05 1.95 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 2 K/s 1.85 1.65 1.6 1.4 200 235 °C to 260 °C First wave 1st line 2nd line 3.5 3.1 Anode 10000 5s TAPING OF VLMx335.. 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 11 - Reel Dimensions - GS08 Rev. 1.2, 14-Sep-2022 Document Number: 84911 7 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS335.., VLMR335.., VLMK335.., VLMO335.., VLMY335.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE N A B C D E Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. F G H I K L After more than 672 h under these conditions moisture content will be too high for reflow soldering. M A. 2D barcode In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch number: year, week, country code, plant code L. SL: storage location M. Environmental halogen-free symbols: L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES RoHS, lead (Pb)-free, 2a 1. Shelf life in sealed bag 12 months at