VS-10MQ060-M3/5AT

VS-10MQ060-M3 www.vishay.com Vishay Semiconductors Schottky Rectifier, 1 A FEATURES • Low forward voltage drop Cathode • Guard ring for enhanced ruggedness and long term reliability Anode • Halogen-free according to IEC 61249-2-21 definition DO-214AC (SMA) • Small foot print, surface mountable • High frequency operation PRODUCT SUMMARY Package DO-214AC (SMA) IF(AV) 1A VR 60 V VF at IF 0.57 V IRM 7.5 mA at 125 °C TJ max. 150 °C Diode variation Single die EAS 2.0 mJ • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS Directive 2002/95/EC DESCRIPTION The VS-10MQ060-M3 surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS DC VRRM IFSM tp = 5 μs sine VF 1.5 Apk, TJ = 125 °C TJ Range 1 A 60 V 40 A 0.63 V - 55 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-10MQ060-M3 UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 4 SYMBOL IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TL = 120 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 1.5 50 % duty cycle at TL = 129 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 1 UNITS A Maximum peak one cycle non-repetitive surge current See fig. 6 IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 4 mH 2.0 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Repetitive avalanche current Revision: 11-Oct-11 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied 40 A 10 Document Number: 93351 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10MQ060-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 1A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 °C 1.5 A 1A TJ = 125 °C 1.5 A Maximum reverse leakage current See fig. 2 Threshold voltage IRM VF(TO) Forward slope resistance rt Typical junction capacitance CT Typical series inductance Maximum voltage rate of change LS dV/dt TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz Measured lead to lead 5 mm from package body Rated VR VALUES UNITS 0.63 0.71 V 0.57 0.63 0.5 mA 7.5 0.45 V 86.8 m 31 pF 2.0 nH 10 000 V/μs VALUES UNITS - 55 to 150 °C 80 °C/W Note (1) Pulse width = 300 μs, duty cycle = 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS DC operation Approximate weight Marking device Case style SMA (similar D-64) 0.07 g 0.002 oz. 1H Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Revision: 11-Oct-11 Document Number: 93351 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10MQ060-M3 www.vishay.com Vishay Semiconductors 1 0.1 0.2 IR - Reverse Current (mA) Allowable Case Temperature (°C) TJ = 150 °C TJ = 125 °C TJ = 25 °C 150 140 DC 130 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 110 100 90 Square wave (D = 0.50) 80 % rated VR applied 80 See note (1) 70 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 0.4 0.8 1.2 1.6 2.0 2.4 VFM - Forward Voltage Drop (V) IF(AV) - Average Forward Current (A) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 4 - Maximum Average Forward Current vs. Allowable Lead Temperature 100 1.4 10 1.2 Average Power Loss (W) IF - Instantaneous Forward Current (A) 10 TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 75 °C 0.01 TJ = 50 °C 0.001 TJ = 25 °C D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1.0 RMS limit 0.8 DC 0.6 0.4 0.2 0 0.0001 10 20 30 40 50 60 0.4 0.8 1.2 1.6 2.0 2.4 VR - Reverse Voltage (V) IF(AV) - Average Forward Current (A) Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage Fig. 5 - Maximum Average Forward Dissipation vs. Average Forward Current CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 0 20 10 30 40 50 60 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage IFSM - Non-Repetitive Surge Current (A) 0 100 10 At any rated load condition and with rated VRRM applied following surge 1 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) Revision: 11-Oct-11 Document Number: 93351 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-10MQ060-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 10 M Q 060 -M3 1 2 3 4 5 6 1 - Vishay Semiconductors product suffix 2 - Current rating 3 - M = SMA 4 - Q = Schottky “Q” series 5 - Voltage rating (060 = 60 V) 6 - Environmental digit: -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-10MQ060-M3/5AT PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 5AT 7500 13" diameter plastic tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95400 Part marking information www.vishay.com/doc?95403 Packaging information www.vishay.com/doc?95404 Revision: 11-Oct-11 Document Number: 93351 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors SMA DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode band Mounting Pad Layout 0.074 (1.88) MAX. 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.066 (1.68) MIN. 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 95400 Revision: 09-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000