VS-HFA25TB60-M3

VS-HFA25TB60-M3 www.vishay.com Vishay Semiconductors HEXFRED® Ultrafast Soft Recovery Diode, 25 A FEATURES 2 • Ultrafast and ultrasoft recovery • Very low IRRM and Qrr • Designed and qualified according to JEDEC®-JESD 47 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3 2L TO-220AC BENEFITS Base cathode 2 • Reduced RFI and EMI • Reduced power loss in diode and switching transistor • Higher frequency operation 1 Cathode • Reduced snubbing 3 Anode • Reduced parts count DESCRIPTION VS-HFA25TB60... is a state of the art ultrafast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 V and 25 A continuous current, the VS-HFA25TB60... is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultrafast recovery time, the HEXFRED® product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to “snap-off” during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED VS-HFA25TB60... is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. PRIMARY CHARACTERISTICS IF(AV) 25 A VR 600 V VF at IF 1.3 V trr typ. 23 ns TJ max. 150 °C Package 2L TO-220AC Circuit configuration Single ABSOLUTE MAXIMUM RATINGS PARAMETER Cathode to anode voltage Maximum continuous forward current SYMBOL TEST CONDITIONS VR IF TC = 100 °C VALUES UNITS 600 V 25 Single pulse forward current IFSM 225 Maximum repetitive forward current IFRM 100 Maximum power dissipation Operating junction and storage temperature range PD TJ, TStg TC = 25 °C 125 TC = 100 °C 50 -55 to +150 A W °C Revision: 23-Nov-17 Document Number: 96193 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA25TB60-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Cathode to anode breakdown voltage VBR IR = 100 μA Maximum forward voltage VFM IF = 50 A IF = 25 A See fig. 1 MIN. TYP. MAX. 600 - - - 1.3 1.7 - 1.5 2.0 1.7 UNITS V IF = 25 A, TJ = 125 °C - 1.3 VR = VR rated - 1.5 20 - 600 2000 - 55 100 pF - 8.0 - nH UNITS Maximum reverse  leakage current IRM Junction capacitance CT VR = 200 V Series inductance LS Measured lead to lead 5 mm from package body TJ = 125 °C, VR = 0.8 x VR rated See fig. 2 See fig. 3 μA DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER Reverse recovery time See fig. 5, 6 and 16 Peak recovery current See fig. 7 and 8 Reverse recovery charge See fig. 9 and 10 Peak rate of fall of recovery current during tb  See fig. 11 and 12 SYMBOL MIN. TYP. MAX. trr IF = 1.0 A, dIF/dt = 200 A/μs, VR = 30 V TEST CONDITIONS - 23 - trr1 TJ = 25 °C - 50 75 trr2 TJ = 125 °C - 105 160 IRRM1 TJ = 25 °C - 4.5 10 IRRM2 TJ = 125 °C - 8.0 15 Qrr1 TJ = 25 °C - 112 375 Qrr2 TJ = 125 °C - 420 1200 di(rec)M/dt1 TJ = 25 °C - 250 - di(rec)M/dt2 TJ = 125 °C - 160 - MIN. TYP. MAX. UNITS - - 300 °C - - 1.0 IF = 25 A diF/dt = 200 A/μs VR = 200 V ns A nC A/μs THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Lead temperature Tlead Thermal resistance,  junction to case RthJC Thermal resistance,  junction to ambient RthJA Typical socket mount - - 80 Thermal resistance,  case to heatsink RthCS Mounting surface, flat, smooth, and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) 0.063” from case (1.6 mm) for 10 s Weight Mounting torque Marking device Case style 2L TO-220AC K/W HFA25TB60 Revision: 23-Nov-17 Document Number: 96193 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA25TB60-M3 Vishay Semiconductors 10 000 1000 TJ = 150 °C IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) www.vishay.com TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 1 0.6 1000 TJ = 125 °C 100 10 1 TJ = 25 °C 0.1 0.01 1.0 1.4 1.8 2.2 2.6 0 100 200 300 400 500 600 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current Fig. 2 - Typical Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 1 10 100 1000 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Response 10 1 PDM t1 0.1 Single pulse (thermal response) 0.01 0.00001 0.0001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 23-Nov-17 Document Number: 96193 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA25TB60-M3 www.vishay.com 140 Vishay Semiconductors 1400 VR = 200 V TJ = 125 °C TJ = 25 °C 120 1200 1000 60 Qrr (nC) trr (ns) 100 80 IF = 50 A IF = 25 A IF = 10 A IF = 50 A IF = 25 A IF = 10 A 800 600 400 40 200 20 100 0 100 1000 1000 diF/dt (A/µs) diF/dt (A/µs) Fig. 5 - Typical Reverse Recovery Time vs. diF/dt Fig. 7 - Typical Stored Charge vs. diF/dt 30 10 000 VR = 200 V TJ = 125 °C TJ = 25 °C VR = 200 V TJ = 125 °C TJ = 25 °C di(rec)M/dt (A/µs) 25 IF = 20 A IF = 25 A IF = 10 A 20 IRR (A) VR = 200 V TJ = 125 °C TJ = 25 °C 15 10 IF = 50 A IF = 25 A IF = 10 A 1000 5 0 100 100 100 1000 1000 diF/dt (A/µs) diF/dt (A/µs) Fig. 6 - Typical Recovery Current vs. diF/dt Fig. 8 - Typical di(rec)M/dt vs. diF/dt (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM di(rec)M/dt (5) 0.75 IRRM (1) diF/dt (1) diF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) di(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 9 - Reverse Recovery Waveform and Definitions Revision: 23-Nov-17 Document Number: 96193 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA25TB60-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- HF A 25 TB 60 -M3 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - HEXFRED® family 3 - Electron irradiated 4 - Current rating (25 = 25 A) 4 5 - Package: TB = 2L TO-220AC 4 6 - Voltage rating (60 = 600 V) 7 - Environmental digit: -M3 = halogen-free, RoHS-compliant, and termination lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-HFA25TB60-M3 QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?96156 Part marking information www.vishay.com/doc?95391 Revision: 23-Nov-17 Document Number: 96193 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors 2L TO-220AC DIMENSIONS in millimeters and inches A 0.014 M B A M (6) E A ØP Q B A (6) (E) A1 Thermal pad 1 (H1) H1 C D2 (6) D 2 D D L1 (2) C (6) c 2xb D1 2 x b2 Detail B Detail B A2 L E1 (6) C (b, b2) Base metal A c1 (4) c 2x e Plating View A - A e1 b1, b3 (4) Section C - C and D - D 0.015 M B A M Lead tip Conforms to JEDEC® outline TO-220AC SYMBOL A A1 A2 b b1 b2 b3 c c1 D D1 MILLIMETERS MIN. MAX. 4.25 4.65 1.14 1.40 2.50 2.92 0.69 1.01 0.38 0.97 1.20 1.73 1.14 1.73 0.36 0.61 0.36 0.56 14.85 15.35 8.38 9.02 INCHES MIN. MAX. 0.167 0.183 0.045 0.055 0.098 0.115 0.027 0.040 0.015 0.038 0.047 0.068 0.045 0.068 0.014 0.024 0.014 0.022 0.585 0.604 0.330 0.355 NOTES 4 4 4 3 SYMBOL D2 E E1 e e1 H1 L L1 ØP Q MILLIMETERS MIN. MAX. 11.68 13.30 10.11 10.51 6.86 8.89 2.41 2.67 4.88 5.28 6.09 6.48 13.52 14.02 3.32 3.82 3.54 3.91 2.60 3.00 INCHES MIN. MAX. 0.460 0.524 0.398 0.414 0.270 0.350 0.095 0.105 0.192 0.208 0.240 0.255 0.532 0.552 0.131 0.150 0.139 0.154 0.102 0.118 NOTES 6, 7 3, 6 6 6 2 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3, and c1 apply to base metal only (5) Controlling dimensions: inches (6) Thermal pad contour optional within dimensions E, H1, D2, and E1 (7) Outline conforms to JEDEC® TO-220, except D2 Revision: 13-Jun-2019 Document Number: 96156 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000