VS-MBRS140TRPbF
Vishay High Power Products
Schottky Rectifier, 1.0 A
FEATURES
• Small foot print, surface mountable
• Low forward voltage drop
• High frequency operation
Cathode
• Guard ring for enhanced ruggedness and long
term reliability
Anode
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
SMB
• Compliant to RoHS directive 2002/95/EC
• Designed and qualified for industrial level
DESCRIPTION
PRODUCT SUMMARY
IF(AV)
1.0 A
VR
40 V
The VS-MBRS140TRPbF surface mount Schottky rectifier
has been designed for applications requiring low forward
drop and very small foot prints on PC boards. Typical
applications are in disk drives, switching power supplies,
converters, freewheeling diodes, battery charging, and
reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
1.0
A
40
V
380
A
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
VF
1.0 Apk, TJ = 125 °C
TJ
Range
0.53
V
- 55 to 150
°C
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VS-MBRS140TRPbF
UNITS
40
V
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average forward current
IF(AV)
Maximum peak one cycle
non-repetitive surge current
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1 A, L = 6 mH
3.0
mJ
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
1.0
A
Repetitive avalanche current
Document Number: 94319
Revision: 05-Mar-10
50 % duty cycle at TL = 119 °C, rectangular waveform
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated
load condition and with
rated VRRM applied
For technical questions, contact: diodestech@vishay.com
1.0
380
A
40
www.vishay.com
1
VS-MBRS140TRPbF
Vishay High Power Products Schottky Rectifier, 1.0 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
1A
VFM (1)
Maximum forward voltage drop
TJ = 25 °C
2A
1A
TJ = 125 °C
2A
IRM (1)
Maximum reverse leakage current
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
TYP.
MAX.
0.52
0.6
0.70
0.77
0.48
0.53
0.63
0.71
-
0.1
-
4.0
UNITS
V
mA
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C
-
80
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
-
2.0
nH
Rated VR
-
10 000
V/μs
Maximum voltage rate of change
dV/dt
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
TJ (1), TStg
TEST CONDITIONS
VALUES
UNITS
- 55 to 150
°C
Maximum thermal resistance,
junction to lead
RthJL (2)
DC operation
See fig. 4
36
Maximum thermal resistance,
junction to ambient
RthJA
DC operation
80
Approximate weight
Marking device
Case style SMB (similar to DO-214AA)
°C/W
0.10
g
0.003
oz.
V14
Notes
(1)
(2)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
Mounted 1" square PCB
www.vishay.com
2
For technical questions, contact: diodestech@vishay.com
Document Number: 94319
Revision: 05-Mar-10
VS-MBRS140TRPbF
Schottky Rectifier, 1.0 A Vishay High Power Products
10
10
IR - Reverse Current (mA)
IF - Instantaneous
Forward Current (A)
TJ = 150 °C
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
1.0
TJ = 125 °C
1.0
TJ = 100 °C
0.1
TJ = 75 °C
0.01
TJ = 50 °C
TJ = 25 °C
0.001
0.0001
0.1
0.2
0.4
0.6
0.8
1.0
0
1.2
5
10
15
20
25
30
35
40
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
1000
100
TJ = 25 °C
10
0
10
20
40
30
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
100
10
PDM
t1
1
Single pulse
(thermal resistance)
0.1
0.00001
0.0001
0.001
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.01
t2
Notes:
1. Duty factor D = t1/t2
.
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94319
Revision: 05-Mar-10
For technical questions, contact: diodestech@vishay.com
www.vishay.com
3
VS-MBRS140TRPbF
1.0
160
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
150
140
130
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay High Power Products Schottky Rectifier, 1.0 A
120
110
100
Square wave (D = 0.50)
Rated VR applied
90
80
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
0.8
0.6
RMS limit
0.4
DC
0.2
See note (1)
70
0
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
0.3
0.6
0.9
1.2
1.5
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Average Forward Current vs.
Allowable Lead Temperature
Fig. 6 - Maximum Average Forward Dissipation vs.
Average Forward Current
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
1000
100
At any rated load condition
and with rated VRRM applied
following surge
10
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration
Note
Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
(1)
www.vishay.com
4
For technical questions, contact: diodestech@vishay.com
Document Number: 94319
Revision: 05-Mar-10
VS-MBRS140TRPbF
Schottky Rectifier, 1.0 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
VS- MBR
1
2
S
1
40
TR
PbF
3
4
5
6
7
1
-
HPP product suffix
2
-
Schottky MBR series
3
-
S = SMB
4
-
Current rating (1 = 1 A)
5
-
Voltage rating (40 = 40 V)
6
-
TR = Tape and reel (3000 pieces)
7
-
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95017
Part marking information
www.vishay.com/doc?95029
Packaging information
www.vishay.com/doc?95034
SPICE model
www.vishay.com/doc?95299
Document Number: 94319
Revision: 05-Mar-10
For technical questions, contact: diodestech@vishay.com
www.vishay.com
5
Outline Dimensions
Vishay High Power Products
SMB
DIMENSIONS in millimeters (inches)
2.15 (0.085)
1.80 (0.071)
3.80 (0.150)
3.30 (0.130)
1
2
1 Polarity
4.70 (0.185)
4.10 (0.161)
2.5 TYP.
(0.098 TYP.)
2 Part Number
Soldering pad
2.40 (0.094)
1.90 (0.075)
1.30 (0.051)
0.76 (0.030)
5.60 (0.220)
5.00 (0.197)
0.30 (0.012)
0.15 (0.006)
2.0 TYP.
(0.079 TYP.)
4.2 (0.165)
4.0 (0.157)
Document Number: 95017
Revision: 25-Jun-07
For technical questions concerning discrete products, contact: diodes-tech@vishay.com
For technical questions concerning module products, contact: ind-modules@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000