VS-VSKDS220/030

VS-VSKDS220/030 www.vishay.com Vishay Semiconductors AAP Gen 7 (TO-240AA) Power Modules Schottky Rectifier, 110 A FEATURES • 150 °C TJ operation • Low forward voltage drop • High frequency operation • Low thermal resistance • UL approved file E78996 • Designed and qualified for industrial level • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AAP Gen 7 (TO-240AA) BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate PRIMARY CHARACTERISTICS IF(AV) 110 A • High surge capability VR 30 V • Easy mounting on heatsink Package AAP Gen 7 (TO-240AA) Circuit configuration Two diodes doubler circuit MECHANICAL DESCRIPTION The AAP Gen 7, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. ELECTRICAL DESCRIPTION / APPLICATIONS The VS-VSKDS220.. Schottky rectifier doubler has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature.  Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, freewheeling diodes, welding, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS Rectangular waveform VRRM IFSM tp = 5 μs sine VF 110 Apk, TJ = 125 °C TJ Range VALUES UNITS 110 A 30 V 18 000 A 0.57 V -55 to +150 °C VS-VSKDS220/030 UNITS 30 V VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM Revision: 03-May-17 Document Number: 94639 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKDS220/030 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum average forward current IF(AV) 50 % duty cycle at TC = 110 °C, rectangular waveform 110 Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 15 A, L = 1 mH 99 mJ IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 22 A SYMBOL TEST CONDITIONS VALUES UNITS 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Repetitive avalanche current Following any rated load condition and with rated VRRM applied 18 000 UNITS A 2000 ELECTRICAL SPECIFICATIONS PARAMETER 110 A VFM Maximum forward voltage drop 220 A 110 A 220 A TJ = 25 °C TJ = 25 °C TJ = 125 °C VR = Rated VR Maximum reverse leakage current IRM Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C LS Measured lead to lead 5 mm from package body Typical series inductance TJ = 125 °C Maximum voltage rate of change dV/dt Rated VR Maximum RMS insulation voltage VINS 50 Hz 0.59 0.78 0.57 V 0.82 10 650 7400 mA pF 7.0 nH 10 000 V/µs 3000 (1 min) 3600 (1 s) V VALUES UNITS -55 to +150 °C THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage  temperature range TJ, TStg Maximum thermal resistance,  junction to case per leg RthJC Typical thermal resistance,  case to heatsink per module RthCS TEST CONDITIONS DC operation °C/W 0.1 Approximate weight to heatsink Mounting torque ± 10 % busbar Case style 0.52 A mounting compound is recommended and the torque should be rechecked after a period of 3 h to allow for the spread of the compound. JEDEC® 75 g 2.7 oz. 4 Nm 3 TO-240AA compatible Revision: 03-May-17 Document Number: 94639 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKDS220/030 Vishay Semiconductors 1000 10 000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) www.vishay.com 100 TJ = 150 °C 10 TJ = 125 °C TJ = 25 °C 1 1000 150 °C 125 °C 100 100 °C 10 75 °C 50 °C 1 25 °C 0.1 0.01 0.0 0.3 0.6 0.9 1.2 1.5 0 5 10 15 20 25 30 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 0 5 10 15 20 25 30 35 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 0.1 D = 0.75 D = 0.5 D = 0.33 D = 0.25 D = 0.2 0.01 0.001 1E-05 Single Pulse (Thermal Resistance) 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 03-May-17 Document Number: 94639 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKDS220/030 Vishay Semiconductors 100 160 Square wave (D = 0.50) 80 % rated VR applied 140 Average Power Loss (W) Allowable Case Temperature (°C) www.vishay.com 120 100 DC 80 60 40 20 80 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 60 RMS limit 40 DC 20 see note (1) 0 0 0 50 100 150 200 250 0 300 20 40 60 80 100 120 140 160 180 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 100 000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 10 000 1000 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (μs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Revision: 03-May-17 Document Number: 94639 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-VSKDS220/030 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS-VS KD 1 2 S 22 0 3 4 5 / 030 6 1 - VS-VS = Vishay Semiconductors product 2 - Circuit configuration: KD = ADD-A-PAK - 2 diodes doubler circuit 3 - S = Schottky diode 4 - Average rating (x 10) 5 - Product silicon identification 6 - Voltage rating (030 = 30 V) CIRCUIT CONFIGURATION (1) ~ (2) + (3) - LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95369 Revision: 03-May-17 Document Number: 94639 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) 29 ± 0.5 (1 ± 0.020) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 18 (0.7) REF. 24 ± 0.5 (1 ± 0.020) 6.7 ± 0.3 (0.26 ± 0.012) Viti M5 x 0.8 Screws M5 x 0.8 Document Number: 95369 Revision: 11-Nov-08 7 6 4 5 3 2 1 6.3 ± 0.2 (0.248 ± 0.008) 22.6 ± 0.2 (0.89 ± 0.008) 80 ± 0.3 (3.15 ± 0.012) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000