VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
Conformal, Single In-Line Thin Film Resistor,
Through Hole Network (Standard)
FEATURES
• Off-the-shelf delivery
• Wide variety of standards
Available
• Small size (SIP)
Available
• Standard designs - no NRE
• Low capacitance < 0.1 pF/PIN
• Flame resistant (UL 94 V-0 rating)
Vishay Dale Thin Film resistor networks are designed to be
used in analog circuits in conjunction with operational
amplifiers. Engineers can use these circuits to achieve an
infinite number of very low noise and high stability circuits
for industrial, medical and scientific instrumentation.
This family of standard resistor networks will continually be
expanded with new and innovative designs, and Vishay Dale
Thin Film stocks most designs in house for off-the-shelf
convenience. However, if you can not find the standard
network you need, call applications engineering at
(716) 283-4025, as we may be able to meet your
requirements with a semicustom “match” for a quick
delivery.
For standard networks with tighter specifications, or for
custom networks, contact Applications Engineering at the
above number. For a quick review of typical applications,
request Vishay’s guide to understanding and using thin film
precision networks.
SCHEMATIC
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
10
2
ABSOLUTE
RATIO
0.1
0.02
TCR
TOL.
Complete electrical specifications at the end of schematics.
TWO EQUAL RESISTORS
R1 = R2
ORDERING INFORMATION (R1 =)
R1
1
R2
2
3
Actual Size
1K: VTF209UF
50K: VTF214UF
2K: VTF210UF
100K: VTF215UF
5K: VTF211UF
200K: VTF216UF
10K: VTF212UF
500K: VTF217UF
20K: VTF213UF
1M: VTF218UF
L = total length = 0.320" (8.13 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Except PN 218 where seated height = 0.342" (8.69 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SUF
R1 + R2 = 10K, 100K, 1M
RATIO DIVIDER 10:1
R1 + R2
R2
ORDERING INFORMATION (R1 + R2 =)
= 10
9K + 1K = 10K: VTF280UF
R2
R1
90K + 10K = 100K: VTF193UF
900K + 100K = 1M: VTF281UF
1
2
3
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF280SUF
L = total length = 0.320" (8.13 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Except PN 281 where seated height = 0.362" (9.19 mm) max.
Revision: 22-Nov-2019
Document Number: 60038
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 10:1
R1 = 100K, 1M
R1
= 10
R2
ORDERING INFORMATION (R1 =)
R2
R1
100K: VTF282UF
1M: VTF283UF
1
2
Actual Size
3
L = total length = 0.320" (8.13 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Except PN 283 where seated height = 0.362" (9.19 mm) max.
TWO EQUAL RESISTORS - ISOLATED
R1 = R2
ORDERING INFORMATION (R1 =)
R1
R2
1
2
3
1K: VTF365UF
4
Actual Size
L = total length = 0.420" (10.67 mm) max.
H = seated height = 0.280" (7.11 mm) max.
50K: VTF1000UF
2K: VTF997UF
100K: VTF348UF
5K: VTF998UF
200K: VTF1105UF
10K: VTF363UF
500K: VTF1106UF
20K: VTF1104UF
1M: VTF1103UF
25K: VTF999UF
Lead (Pb)-free option add “S” after part number,
e.g: VTF209SUF
RATIO DIVIDER 10:1 AND 100:1
R1
R1 + R2 + R3 = 100K
R1 + R2 + R3
R3
R1 + R2 + R3
R2 + R3
R2
90K
= 100
1
R3
9K
ORDERING INFORMATION (R1 + R2 + R3 =)
100K: VTF330UF
1K
2
3
4
Actual Size
= 10
Lead (Pb)-free option add “S” after part number,
e.g: VTF330SUF
L = total length = 0.420" (10.67 mm) max.
H = seated height = 0.280" (7.11 mm) max.
FOUR EQUAL RESISTORS ONE COMMON
R1 = R2 = R3= R4 = 10K, 100K
R1
1
2
R2
3
ORDERING INFORMATION (R1 =)
R3
10K: VTF366UF
R4
4
5
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF366SUF
L = total length = 0.520" (13.21 mm) max.
H = seated height = 0.280" (7.11 mm) max.
DIVIDER NETWORK 2:1
R1 = 10K
R2
R1
=1
R3 =
R1 x R2
R1 + R2
100K: VTF367UF
R1
R2
R3
10K
10K
5K
1
2
3
4
ORDERING INFORMATION
VTF1087UF
5
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1087SUF
L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) max.
Revision: 22-Nov-2019
Document Number: 60038
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 2:1
R1 = 10K
R2
R1
=2
R3 =
R1 x R2
R1 + R2
R1
R2
R3
10K
20K
6.667K
1
2
3
ORDERING INFORMATION
4
VTF1088UF
Actual Size
5
Lead (Pb)-free option add “S” after part number,
e.g: VTF1088SUF
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
DIVIDER NETWORK 5:1
R1 = 10K
R2
R1
=5
R3 =
R1 x R2
R1
R2
R3
10K
50K
8.333K
1
R1 + R2
2
3
ORDERING INFORMATION
4
VTF1089UF
5
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1089SUF
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
R1 = 10K
R2
R1
R2
R3
10K
100K
9.09K
ORDERING INFORMATION
= 10
R3 =
DIVIDER NETWORK 10:1
R1
R1 x R2
1
R1 + R2
2
3
VTF1090UF
5 Actual Size
4
Lead (Pb)-free option add “S” after part number,
e.g: VTF1090SUF
L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) max.
Note
• R2 TCR tracking 3 ppm/°C
DIVIDER NETWORK 1:1
R1 = 5K, 10K, 100K, 1M
R1 = R2
R1
R2
ORDERING INFORMATION (R1 =)
R2
R1
5K: VTF225UF
10K: VTF286UF
1
2
3
4
5
6
Actual Size
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Except PN 287 seated height = 0.362" (9.19 mm) max.
100K: VTF219UF
1M: VTF287UF
Lead (Pb)-free option add “S” after part number,
e.g: VTF225SUF
DIVIDER NETWORK 2:1
R1 = 10K, 100K
R1
R2
R1
=2
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1009UF
100K: VTF1010UF
1
2
3
4
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Revision: 22-Nov-2019
5
6 Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1009SUF
Document Number: 60038
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
DIVIDER NETWORK 5:1
R1 = 10K, 100K
R1
R2
R2
R1
=5
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1007UF
100K: VTF1008UF
1
2
3
4
5
6
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF1007SUF
Actual Size
DIVIDER NETWORK 10:1
R1 = 10K
R2
R1
R1
R2
R1
ORDERING INFORMATION (R1 =)
R2
10K: VTF220UF
= 10
1
2
3
4
5
6
Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF220SUF
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
DIVIDER NETWORK 10:1
R1 = 10K, 100K, 1M
R1
R2
R1
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF328UF
= 10
1
2
3
4
5
6
100K: VTF284UF
Actual Size
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Except PN 285 seated height = 0.320" (8.13 mm) max.
1M: VTF285UF
Lead (Pb)-free option add “S” after part number,
e.g: VTF328SUF
DIVIDER NETWORK 20:1
R1 = 10K, 50K, 200K, 1M
R1
R2
R1
R2
R2
ORDERING INFORMATION (R1 =)
R1
10K: VTF1073UF
= 20
50K: VTF1074UF
1
2
3
4
5
6
Actual Size
200K: VTF1107UF
1M: VTF1108UF
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Lead (Pb)-free option add “S” after part number,
e.g: VTF1073SUF
DIVIDER NETWORK 100:1
R1 = 1M
R1
R2
R1
R2
R2
R1
ORDERING INFORMATION (R1 =)
1M: VTF1109UF
= 100
1
2
3
4
5
6 Actual Size
Lead (Pb)-free option add “S” after part number,
e.g: VTF1109SUF
L = total length = 0.620" (15.75 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Revision: 22-Nov-2019
Document Number: 60038
4
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
SIX RESISTOR NETWORK
Common mode
Division ratio 250, 100, 50
R1 = R3 = 1M
R2 = 4K, 10K, 20K
R4 = 3.984K, 9.901K, 19.608K
R5 = 900K, 950K, 975K
R6 = 100K, 50K, 25K
(Designed for unity gain/high common mode voltage
rejection differential amplifier)
ORDERING INFORMATION (R1/R2 =)
Devision Ratio = 250: VTF442UF
100: VTF443UF
R5
R6
R1
R2
R4
1M
1
2
3
50: VTF444UF
R3
Lead (Pb)-free option add “S” after part number,
e.g: VTF442SUF
1M
4
5
6
7
Actual Size
L = total length = 0.720" (18.29 mm) max.
H = seated height = 0.360" (9.14 mm) max.
Maximum voltage to pins 3 and 7 is 300 V
FOUR EQUAL RESISTORS ISOLATED
ORDERING INFORMATION (R1 =)
1K: VTF329UF
R1 = 1K, 10K, 25K, 50K, 100K
2K: VTF1001UF
R1
R1
R1
R1
5K: VTF1002UF
1
2
3
4
5
6
7
8
10K: VTF158UF
Actual Size
25K: VTF1003UF
L = total length = 0.820" (20.83 mm) max.
H = seated height = 0.280" (7.11 mm) max.
50K: VTF1004UF
100K: VTF288UF
Lead (Pb)-free option add “S” after part number,
e.g: VTF329SUF
FOUR EQUAL RESISTORS ISOLATED
R1 = 1K, 10K, 100K
R1
ORDERING INFORMATION (R1 =)
R1
R1
1K: VTF1005UF
R1
10K: VTF1006UF
1
2
3
4
5
6
Absolute tolerance = 0.1 %
Ratio tolerance = 0.1 %
L = total length = 0.820" (20.83 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Revision: 22-Nov-2019
7
8 Actual Size
100K: VTF1137UF
Lead (Pb)-free option add “S” after part number,
e.g: VTF1005SUF
Document Number: 60038
5
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
EIGHT EQUAL RESISTORS ONE COMMON
ORDERING INFORMATION (R1 =)
10K: VTF368UF
Actual Size
R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K
R2
R1
1
2
R3
3
R4
4
R5
5
100K: VTF369UF
R6
6
R7
7
R8
8
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF368SUF
L = total length = 0.920" (23.37 mm) max.
H = seated height = 0.280" (7.11 mm) max.
EIGHT RESISTOR NETWORK
(Designed for instrument amplifier with shield driver)
ORDERING INFORMATION
Actual Size
10K
1K
9K
1K
1K
9K
1K
VTF272UF
10K
Lead (Pb)-free option add “S” after part number,
e.g: VTF272SUF
Ref.
1
2
3
5
4
6
7
8
9
L = total length = 0.920" (23.37 mm) max.
H = seated height = 0.280" (7.11 mm) max.
EIGHT BIT R/2R LADDER NETWORK
R = 1K, 10K
ORDERING INFORMATION (R =)
(± 1/2 LSB)
Actual Size
2R
1
R
R
R
R
R
R
R
2R
2R
2R
2R
2R
2R
2R
2
3
4
5
6
7
8
1K: VTF1072UF
10K: VTF267UF
2R
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF1072SUF
10
L = total length = 1.020" (25.91 mm) max.
H = seated height = 0.280" (7.11 mm) max.
RESISTANCE DOUBLER
R1 = 1K
ORDERING INFORMATION
VTF1011UF
Actual Size
1
1K
2K
4K
8K
16K
32K
64K
128K
256K
R1
R2
R3
R4
R5
R6
R7
R8
R9
2
3
4
5
6
7
8
9
Lead (Pb)-free option add “S” after part number,
e.g: VTF1011SUF
10
Absolute tolerance = ± 0.1 %
Ratio tolerance = ± 0.1 %
TCR tracking = ± 3 ppm/°C
L = total length = 1.02" (25.91 mm) max.
H = seated height = 0.280" (7.11 mm) max.
Revision: 22-Nov-2019
Document Number: 60038
6
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
3 to 10
-
Resistance Range
100 to 2 M total
-
TCR: Absolute
± 10 ppm/°C (1)
0 °C to +70 °C
TCR: Tracking
± 2 ppm/°C (1)
0 °C to +70 °C
Tolerance: Absolute
± 0.1 %
+25 °C
Tolerance: Ratio
± 0.02 %
+25 °C
Power Rating: Resistor
100 mW
-
Power Rating: Package
500 mW
-
Stability: Absolute
R ± 0.05 %
2000 h at +70 °C
Stability: Ratio
R ± 0.015 %
2000 h at +70 °C
Voltage Coefficient
± 0.01 ppm/V
-
Material
Working Voltage
100 V
-
0 °C to +70 °C
-
-55 °C to +125 °C
-
< - 35 dB
-
< 0.1 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at +25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at +25 °C
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Note
(1) TCR over -55 °C to +125 °C ± 20 ppm/°C absolute, ± 3 ppm/°C tracking
DIMENSIONS AND IMPRINTING in inches and millimeters
Part Number
E
Date Code
Pin 1
H
Vishay
Logo
B
A
D
C
L
DIMENSION
INCHES
MILLIMETERS
A
0.125 min.
3.17
B
0.010 min.
0.25
C
0.100
2.54 typ.
D
0.020 typ.
0.48 ± 0.15
E
0.100 max.
2.54
F
0.010 typ.
0.25
F
Note
• “L” and “H” (length and height) dimensions for each model are found alongside the schematic drawing
MECHANICAL SPECIFICATIONS
Resistive Element
Passivated nichrome
Substrate Material
Alumina
Body
Epoxy coated
Terminals
Copper alloy
Tin / Lead Option
Lead (Pb)-free Option
Tin / Lead and Lead (Pb)-free Finish
Revision: 22-Nov-2019
Sn60 - Sn63
Sn96.5, Ag3.0, Cu0.5
Hot solder dip
Document Number: 60038
7
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VTF (Standard)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF211UF
V
T
F
V
T
F
2
1
1
0
1
0
4
S
GLOBAL MODEL
PART NUMBER
(3 or 4 digits)
LEAD (Pb)-FREE
(0 or 1 digits)
VTF
xxx or xxxx
S = lead (Pb)-free (e1)
None = tin lead
U
F
U
F
PACKAGING
UF = tubed
Example: 214
1004
Historical Part Number example: VTF 211 (for reference purposes only)
Revision: 22-Nov-2019
VTF
211
MODEL
PART NUMBER
Document Number: 60038
8
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000