WSK1206R0170FEA

WSK1206 www.vishay.com Vishay Dale Power Metal Strip® Resistors, High Power, Surface Mount, 4-Terminal FEATURES • 4-terminal design • Ideal for all types of current sensing, voltage division and pulse applications • Proprietary processing technique produces extremely low resistance values • Durable with all-welded construction • Sulfur resistance by construction that is unaffected by high sulfur environments • Solid metal nickel-chrome or manganesecopper resistive element with low TCR (< 20 ppm/°C) DESIGN SUPPORT TOOLS click logo to get started Available Available • All welded construction • Low thermal EMF (< 3 μV/°C) Models Available Design Tools • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL SIZE WSK1206 1206 RESISTANCE VALUE RANGE  POWER RATING P70 °C W Tol. ± 0.1 % Tol. ± 0.25 % Tol. ± 0.5 % Tol. ± 1.0 % 0.25 0.04 to 0.05 0.02 to 0.05 0.01 to 0.05 0.01 to 0.05 WEIGHT (typical) g/1000 pieces 16 Notes • Part marking: due to resistor size limitation, parts will be marked with only the resistance value • Resistance values are available per WSL decade table (www.vishay.com/doc?30117) TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Component temperature coefficient (including terminal) (1) ppm/°C ± 35 Element TCR (2) ppm/°C < 20 Operating temperature range °C -65 to +170 Maximum working voltage (3) V (P x R)1/2 Notes (1) Component TCR - total TCR that includes the TCR effects of the resistor element and the copper terminal (2) Element TCR - only applies to the alloy used for the resistor element; refer to item 1 in the construction illustration on the following page (3) Maximum working voltage - the WSL is not voltage sensitive, but is limited by power / energy dissipation and is also not ESD sensitive Revision: 13-Feb-18 Document Number: 30195 1 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSK1206 www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering example: WSK1206R0150FEA W S K 1 2 0 6 RESISTANCE VALUE GLOBAL MODEL WSK1206 R = decimal R0100 = 0.01  R 0 1 5 0 F E A TOLERANCE CODE PACKAGING CODE (1) SPECIAL B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % EA = lead (Pb)-free, tape / reel EK = lead (Pb)-free, bulk (Dash number) (up to 2 digits) From 1 to 99 as applicable Note (1) Packaging code: EB (lead (Pb)-free) and TB (tin / lead) are non-standard packaging codes designating 1000 piece reels. These non-standard packaging codes are identical to our standard EA (lead (Pb)-free) and TA (tin / lead), except that they have a package quantity of 1000 pieces DIMENSIONS DIMENSIONS in inches (millimeters) MODEL WSK1206 L W H T A B 0.126 ± 0.010 (3.20 ±0.254) 0.063 ± 0.010 (1.60 ± 0.254) 0.025 ± 0.010 (0.635 ± 0.254) 0.020 ± 0.010 (0.508 ± 0.254) 0.023 ± 0.010 (0.584 ± 0.254) 0.018 ± 0.010 (0.457 ± 0.254) SOLDER PAD DIMENSIONS in inches (millimeters) MODEL WSK1206 Revision: 13-Feb-18 a b c d l 0.040 (1.01) 0.070 (1.778) 0.030 (0.762) 0.01 (0.254) 0.070 (1.778) Document Number: 30195 2 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 WSK1206 www.vishay.com Vishay Dale Rated Power in % DERATING PULSE CAPABILITY 120 click to get started 100 80 60 40 US ILL 20 0 -65 -50 -25 0 25 50 70 100 125 VE TI A TR S SE O RP PU LY ON 150 170 Ambient Temperature in °C www.vishay.com/resistors/power-metal-strip-calculator PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal shock -55 °C to +150 °C, 1000 cycles, 15 min at each extreme ± (0.5 %) R Short time overload 5x rated power for 5 s ± (0.5 %) R Low temperature operation -65 °C for 45 min ± (0.5 %) R High temperature exposure 1000 h at +170 °C ± (1.0 %) R Bias humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± (0.5 %) R Mechanical shock 100 g’s for 6 ms, 5 pulses ± (0.5 %) R Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h ± (0.5 %) R Load life 1000 h at +70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 %) R Resistance to solder heat +260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 %) R Moisture resistance MIL-STD-202, method 106, 0 % power, 7b not required ± (0.5 %) R PACKAGING REEL MODEL WSK1206 TAPE WIDTH DIAMETER PIECES/REEL CODE 8 mm/embossed plastic 178 mm/7" 4000 EA Notes • Embossed carrier tape per EIA-481 • Wirewound, Metal Film, and Power Metal Strip® Packaging (www.vishay.com/doc?20051) Revision: 13-Feb-18 Document Number: 30195 3 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000