XLD8A24CAHM3/I

XLD8A24CA www.vishay.com Vishay General Semiconductor Surface Mount XClampRTM Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • XClampRTM extremely low clamping voltage • IPPM = 180 A with a 10/10 000 μs waveform • TJ = 175 °C capability suitable for high reliability and automotive requirement • Bidirectional • Low leakage current • AEC-Q101 qualified - Automotive ordering code: base P/NHM3 DO-218AB • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C PRIMARY CHARACTERISTICS VWM 24 V VBR 26.7 ~ 29.5 VCL max. 26 V PPPM (10/1000 μs) 11000 W (1) PPPM (10/10 000 μs) 7000 W (2) TJ max. 175 °C Polarity Bidirectional Package DO-218AB • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: DO-218AB Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Notes (1) Equivalent I PPM with conventional 11 kW TVS (2) Equivalent I PPM with conventional 7000 W TVS Terminals: matte tin plated J-STD-002 and JESD 22-B102 TYPICAL APPLICATIONS Polarity: no cathode marking on bidirectional types leads, solderable per HM3 suffix meet JESD 201 class 2 whisker test Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning, especially for automotive load dump protection application withstanding 24 V jumper-start voltage test for 12 V powertrain. May need to connect in series with one conventional TVS to address in applications for various stand-off voltages and clamping voltages. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Peak pulse power dissipation VALUE UNIT X8A24C with 10/1000 μs waveform with 10/10 000 μs waveform Peak pulse current with a 10/10 000 μs waveform, fig.4 Operating junction and storage temperature range PPPM 11 000 (1) W 7000 (1) W IPPM (2) 180 A TJ, TSTG -55 to +175 °C Notes (1) The peak pulse power at equivalent I PPM with conventional TVS (2) Non-repetitive current pulse and derated above T = 25 °C A Revision: 08-Aug-2023 Document Number: 87200 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XLD8A24CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN VOLTAGE VBR (V) AT IT DEVICE TYPE MIN. MAX. 26.7 29.5 XLD8A24CA TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAX. REVERSE LEAKAGE AT VWM ID (μA) MAX. PEAK PULSE CURRENT AT 10/10 000 μs WAVEFORM (A) 5 24 1.0 180 CLAMPING VOLTAGE AT IPPM VC (V) MIN. MAX. 18 26 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE XLD8A24CAHM3/I(1) 2.605 I BASE QUANTITY DELIVERY MODE 750 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified I - V CURVE CHARACTERISTICS I IPP VBR.......Breakdown voltage VBR VC IT IT..........Reverse test current IT VC VBR V VC........Clamping voltage IPP........Peak pulse surge current IPP Revision: 08-Aug-2023 Document Number: 87200 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XLD8A24CA www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title 10000 150 1000 100 10 100 2nd line IPPM - Peak Pulse Current, % IRSM 1000 1000 100 1000 Peak value IPPM Half value IPPM - IPPM/2 50 100 10us/10ms waveform td 10 10 000 100 10000 TJ = 25 °C Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µs 1st line 2nd line 2nd line IPPM - Peak Pulse Current (A) Non-repetitive exponential pulse, 1st line 2nd line 10 000 10 0 0 10 td - Pulse Width (µs) 20 tp - Time (ms) 30 40 Fig. 1 - Peak Pulse Current Rating Curve Fig. 4 - Pulse Waveform Axis Title 1000 50 100 25 0 10 0 25 50 75 100 125 150 4.5 1000 4.0 1st line 2nd line 75 2nd line CJ - Junction Capacitance (nF) 5.0 1st line 2nd line Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 10000 5.5 10000 100 3.5 3.0 100 2.5 2.0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1.5 10 1.0 175 0 TJ - Initial Temperature (°C) 8 10 12 14 16 18 20 22 24 Peak value IPPM Half value IPPM - IPPM/2 100 10/1000 µs waveform 10000 29 1000 1st line 2nd line 1000 100 2nd line Breakdown Voltage (V) 30 TJ = 25 °C Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 1st line 2nd line 2nd line IPPM - Peak Pulse Current, % IRSM 6 Fig. 5 - Typical Junction Capacitance 10000 150 50 4 VR - Reverse Applied Voltage (V) Fig. 2 - Peak Pulse Current vs. Initial Junction Temperature tr = 10 µs 2 28 100 27 td 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10 26 -55 -15 25 65 105 145 185 tp - Time (ms) TA = TJ - Temperature (°C) Fig. 3 - Pulse Waveform Fig. 6 - Typical Breakdown Voltage vs. Temperature Curve Revision: 08-Aug-2023 Document Number: 87200 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 XLD8A24CA www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-218AB 0.628 (16.0) 0.592 (15.0) 0.539 (13.7) 0.524 (13.3) Mounting Pad Layout 0.150 (3.8) 0.126 (3.2) 0.116 (3.0) 0.093 (2.4) 0.091 (2.3) 0.067 (1.7) 0.413 (10.5) 0.342 (8.7) 0.374 (9.5) 0.327 (8.3) 0.413 (10.5) 0.374 (9.5) 0.366 (9.3) 0.343 (8.7) 0.406 (10.3) 0.382 (9.7) 0.197 (5.0) 0.185 (4.7) 0.116 (3.0) 0.093 (2.4) 0.366 (9.3) 0.343 (8.7) 0.606 (15.4) 0.583 (14.8) Lead 1 0.138 (3.5) 0.098 (2.5) 0.016 (0.4) MIN. Lead 2/Metal Heatsink 0.098 (2.5) 0.059 (1.5) 0.028 (0.7) 0.020 (0.5) Revision: 08-Aug-2023 Document Number: 87200 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000