Y1691V0042VV9L

300144Z, 300145Z (Z-Foil) Vishay Foil Resistors Bulk Metal® Foil Technology Ultra High Precision Z-Foil Voltage Divider Resistors with TCR Tracking to 0.1 ppm/°C, Power Coefficient Tracking of 5 ppm at Rated Power, and Tolerance Match to 0.005 % (50 ppm) FEATURES  Temperature coefficient of resistance (TCR): absolute: ± 0.05 ppm/°C typical (0 °C to + 60 °C) ± 0.2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.) TCR tracking: 0.1 ppm/°C typical  Tolerance: absolute and matching to 0.005 % (50 ppm)  Power coefficient tracking “R due to self heating”: 5 ppm at rated power  Power rating: 0.2 W at 70 °C, for the entire resistive element R1 and R2, divided proportionally between the two values APPLICATIONS  Load life ratio stability: < 0.005 % (50 ppm) 0.2 W at 70 °C for 2000 h R2  Instrumentation amplifiers  Bridge networks V1 R1  Differential amplifiers V2 R3 + R4  Military Vout 300144 300145  Maximum working voltage: 200 V  Resistance range: 100R to 20K per resisitve element  Medical  Foil resistors are not restricted to standard values/ratios; specific “as requested” values/ratios can be supplied at no extra cost or delivery (e.g. 1K2345 vs. 1K)  Automatic test equipment  Electrostatic discharge (ESD) up to 25 000 V  Down-hole (high temperature)  Non-inductive, non-capacitive design  Space  Rise time: 1 ns effectively no ringing  Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB) TABLE 1A - MODELS 300144Z AND 300145Z SPECIFICATIONS RESISTANCE VALUES ABSOLUTE TOLERANCE  500  to 20 k ± 0.005 % 100  to < 500  ± 0.01 % ABSOLUTE TCR (- 55 °C to + 125 °C, + 25 °C ref.) TYPICAL AND MAX. SPREAD ± 0.2 ppm/°C ± 1.8 ppm/°C  Thermal EMF: 0.05 µV/°C typical  Voltage coefficient: < 0.1 ppm/V  Non inductive: < 0.08 µH  Non hot spot design  Thermal stabilization time < 1 s (nominal value achieved within 10 ppm of steady state value)  Terminal finish: lead (Pb)-free or tin/lead alloy  Compliant to RoHS directive 2002/95/EC TABLE 1B - MODELS 300144Z AND 300145Z SPECIFICATIONS RESISTANCE RATIO 1:1 > 1:1 to 4:1 > 4:1 to 10:1 > 10:1 TOLERANCE MATCH 0.005 % 0.01 % TCR TRACKING MAX.  Prototype quantities available in just 5 working days or sooner. For more information, please contact foil@vishaypg.com  For better performances please contact us 0.5 ppm/°C 0.75 ppm/°C 1.0 ppm/°C 1.5 ppm/°C * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63115 Revision: 16-Sep-13 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 1 300144Z, 300145Z (Z-Foil) Vishay Foil Resistors INTRODUCTION Possibly you have become so accustomed (and inured) to a slight instability or drift in your equipment that you no longer regard the problem as a soluble. You have learned to live with it. But have your customers? They are still waiting for a solution. And if you cannot provide one, someone else may. There are so many stability problems directly traceable to resistive devices that skimping on the quality of a few critical resistors, resistive networks may be counterproductive. Load Life Stability Load Life stability is the characteristics most relied upon to demonstrate resistor long term reliability. Many applications require a load life of between 2000 h to 10 000 h with limits on the amount of shift and the number of failure rate demonstration. The ultra high precision Z-Foil divider and network have the tightest allowable limits. Whether high reliable application or not, the load life stability of Foil resistors is unparalleled and long term serviceability is assured. With Bulk Metal® Foil resistors, only a minimal shift in resistance value will occur during its entire lifetime. Most of this shift takes place during the first few hundred hours of operation, and virtually no change is noted thereafter. Ratio Stability Resistors in dividers or networks form are called upon to maintain a track and match more than at ambient temperature and when they expose to stress factors before, during and after the assembly. Throughout the long service life of the equipment, the resistors around the op amplifier for example are required to track (to hold ratio) even though the dissipation in the feedback resistor is different than that in the sense resistor, causing on one to be at higher temperature than the other. This is called tracking under power for short term (power coefficient of resistance) or for a long term (load life stability). Temperature Coefficient of Resistance (TCR) The low temperature coefficient of resistors are achieved by the use of especially selected materials for the resistive and insulating members of the resistors which self-compensate the thermal coefficient of expansion.  Change in a metal’s resistivity occurs in two ways: by changes in temperature (external and internal) and by changes in mechanical strain. By developing resistor element materials whose resistances change positively when subjected to temperature increase, and negativity when subjected to compression, the Foil resistors achieved, in the temperature range - 55 °C to + 125 °C, a maximum absolute TCR of 5 ppm/°C for the classical Foil and maximum 2 ppm/°C for the Z-Foil technology. To achieve maximum optimum TC tracking between resistors, all factors that affect the TCR of each resistor must be uniform. Whatever their resistance range or wattage, all Foil resistors exhibit identical temperature coefficients as all are made of the same alloy and of identical physical and electrical characteristics. The only variable between these resistors is the pattern photoetched on the element, a process that does not alter alloy properties in any way. In resistors, all TCR and other electrical characteristics are inherent to the alloy, and are therefore uniform between individual resistors, as well as between batches, thus accurate “tracking” of one style resistor to another is assured (even if they differ in size and range). Data on TCR spread shown (fig. 4) illustrate the excellent tracking available with all Foil resistors. Because of this excellent tracking ability, resistors are ideal for use in resistor networks where accurate ratios must be maintained over a wide temperature range. This designed-in TCR uniformity contrasts sharply with the TCR tracking capability of wirewound and conventional metal film units. TCR characteristics between wirewounds of different resistance ranges and wattage are highly non-uniform, because (a) different wire diameters are used, (b) winding-induced stresses-which have a direct bearing on TCR. Conventional metal films units offer quite variable and often unpredictable TC tracking because composition, film thickness, and deposition techniques are varied to meet different resistance range and wattage requirements. Our application engineering department is available to advise and make recommendations. For non-standard technical requirements and special applications. Please contact us. FIGURE 1 - TRIMMING TO VALUES (conceptual illustration) Interloop Capacitance Reduction in Series Mutual Inductance Reduction due to Opposing Current in Adjacent Lines Current Path Before Trimming Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Note: Foil shown in black, etched spaces in white www.vishayfoilresistors.com 2 For any questions, contact: foil@vishaypg.com Document Number: 63115 Revision: 16-Sep-13 300144Z, 300145Z (Z-Foil) Vishay Foil Resistors FIGURE 2 - STANDARD PRINTING AND DIMENSIONS in inches (millimeters) Model 300144Z and Schematic (2) 0.1 (2.54) VFR 9825 300144Z 0.320 (8.13) 1 0.015 ± 0.005 (0.38 ± 0.13) 6 R1 5 0.2 (5.08) 4 6 R2 R1 Indicator 0.025 ± 0.005 (0.64 ± 0.13) (1) 0.75 (19.05) 1 2 3 Date Code Model No. VFR 9825 300145Z 0.375 (9.53) 0.015 ± 0.005 (0.38 ± 0.13) Dimensional Tolerance: ± 0.010" (0.25) 0.1 (2.54) (1) (2) (3) 0.025 ± 0.005 (0.64 ± 0.13) Lead wires: #22 AWG solder coated copper, 0.75" minimum length Each divider pair consists of two resistors on one single chip For model 300145Z the 2 chips are independent and with no special relationship from chip to chip 2 4 R4 R3 R1 R2 Match Tolerance 0.75 (1) (19.05) 1 5 10K000 0.01% 10K000 Date Code Model No. Match Tolerance 10K000 0.01% 10K000 0.295 (7.49) Model 300145Z and Schematic (2)(3) 0.375 (9.53) 1 2 3 3 0.1 (2.54)  FIGURE 3 - POWER DERATING CURVE 300144Z, 300145Z Percent of Rated Power at + 70 °C 100 % - 55 °C FIGURE 4 - TYPICAL RESISTANCE/ TEMPERATURE CURVE (for more details see table 1A) + 70 °C TCR Chord Slopes for Different Temperature Ranges Rated Power + 500 + 400 75 % + 300 + 200 + 100 ΔR 0 R (ppm) - 100 50 % Recommended operation for < 150 ppm ΔR Δ after 2000 h load life 25 % 0.05 ppm/°C - 200 - 0.1 ppm/°C - 300 0.1 ppm/°C 0.14 ppm/°C - 400 - 0.16 ppm/°C 0.2 ppm/°C - 500 0 - 75 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200 - 55 Ambient Temperature (°C) Document Number: 63115 Revision: 16-Sep-13 0 + 25 + 60 + 75 + 100 + 125 Ambient Temperature (°C) Note • Power is divided proportionally between the 2 values  - 25      For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 3 300144Z, 300145Z (Z-Foil) Vishay Foil Resistors TABLE 2 - GLOBAL PART NUMBER INFORMATION (1) NEW GLOBAL PART NUMBER: Y1691V0058QT9L (preferred part number format) DENOTES PRECISION VCODE TOLERANCE MATCH PACKAGING Y RESISTANCE VALUE CODE V = 0.005 % T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.1 % D = 0.5 % F = 1.0 % L = bulk pack Y 1 6 9 1 V 0 0 5 8 Q T 9 L PRODUCT CODE RESISTANCE TOLERANCE CHARACTERISTICS 1691 = 300144Z 1735 = 300145Z V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % 0 = standard 9 = lead (Pb)-free 1 to 999 = custom  FOR EXAMPLE: ABOVE GLOBAL ORDER Y1691 V0058 Q T 9 L: TYPE: 300144Z VALUES: 2K/20K ABSOLUTE TOLERANCE: ± 0.02 % TOLERANCE MATCH: 0.01 % TERMINATION: lead (Pb)-free PACKAGING: bulk pack HISTORICAL PART NUMBER: 300144ZT 2K/20K TCR0.2 Q T B (will continue to be used) 300144Z T 2K/20K TCR0.2 Q T B MODEL TERMINATION OHMIC VALUE TCR CHARACTERISTIC ABSOLUTE TOLERANCE TOLERANCE MATCH PACKAGING 300144Z 300145Z T = lead (Pb)-free None = tin/lead alloy R1 = 2 k R2 = 20 k R3 (2) R4 (2) V T Q A B D F = ± 0.005 % = ± 0.01 % = ± 0.02 % = ± 0.05 % = ± 0.1 % = ± 0.5 % = ± 1.0 % V = 0.005 % T = 0.01 % Q = 0.02 % A = 0.05 % B = 0.1 % D = 0.5 % F = 1.0 % B = bulk pack Notes (1) For non-standard requests, please contact application engineering (2) For 300145 please specify the resistance value for each resistor even if all values are equal www.vishayfoilresistors.com 4 For any questions, contact: foil@vishaypg.com Document Number: 63115 Revision: 16-Sep-13 300144Z, 300145Z (Z-Foil) Vishay Foil Resistors TABLE 3 - EXAMPLES OF VCODES FOR POPULAR VALUES (other values available on request) 300144 RATIOS 300145 RATIOS VCODES R1 R2 VCODES R1 R2 VCODES R1 R2 R3 R4 V0009 20K 20K V0058 2K 20K V0008 10K 10K 10K 10K V0010 20K 10K V0030 2K 18K V0019 5K 5K 5K 5K V0100 20K 2K V0029 2K 4K V0092 1K 7K812 7K812 1K V0055 19K4 9K7 V0059 2K 2K V0023 500R 500R 500R 500R V0223 17K5 20K V0103 2K 3K V0047 100R 8K8 100R 8K8 V0097 15K 15K V0154 1K5 3K V0051 100R 10K 100R 10K V0001 10K 10K V0032 1K 16K V0051 100R 10K 100R 10K V0042 10K 8K323 V0121 1K 2K V0227 350R 350R 350R 350R V0006 10K 2K V0004 1K 1K - - - - - V0166 10K 15K V0379 1K 7K - - - - - V0226 9K 10K V0374 800R 800R - - - - - V0003 9K 1K V0022 511R 16K2 - - - - - V0013 8K 16K V0091 500R 500R - - - - - V0107 6K 20K V0162 500R 15K - - - - - V0014 6K 7K V0378 500R 4K5 - - - - - V0160 6K 6K V0061 300R 300R - - - - - V0159 5K5 7K7 V0088 100R 100R - - - - - V0005 5K 10K V0380 100R 15K - - - - - V0002 5K 5K V0375 100R 12K3 - - - - - V0373 4K 12K V0381 100R 50R - - - - - V0026 3K 19K2 V0377 50R 28K - - - - - V0156 3K 6K V0376 35R 20K - - - - - V0158 2K7 10K - - - - - - - - Note • A combination of these values are available in reverse order and in values up to 5 digits Document Number: 63115 Revision: 16-Sep-13 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com 5 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1