RMC5WC5K1K

TOKEN RMCC Surge Metal Ceramic Resistors Surge Metal Ceramic Resistors (RMCC) The Way Allows Energy and Power to be Uniformly Distributed Preview Following market demands, Token Electronics provided an extent of Bulk Ceramic Composition RMCA, RMCB Series to RMCC Series. The cap and lead assemblies are pressed onto the RMCC resistor core, finishing the resistor and providing rugged terminal attachment. Token Surge Resistors - RMCC Series are primarily designed for high voltage, power charging/discharging circuits,, surge energy applications and conform to the RoHS directive and Lead-free. For customed designs, tighter tolerances, non-standard technical requirements, or custom special applications, please contact our sales for more information. Bulk Ceramic Construction :  Bulk metal ceramic resistors that consists of a clay, alumina, and ceramic filler that has been blended and pressurized into a resistive core and then covered with a molded outer insulating core. Replacement Carbon-Composition Resistors :  Design requirements for custom sizes, surface mount, or special footprints can be met easily.  In cases where several carbon-composition resistors have been used together in an array to achieve a particular rating, they have been replaced with a single bulk ceramic resistor, frequently at a lower installed cost. Applications - Radar, Motor Drives, Broadcast Transmitters, - X-Ray, Lasers, Medical Defibrillators, - Dynamic Braking, Soft-start/Current-limit, - Snubber Circuits, Dummy Loads, Energy Research - RF Amplifiers, Semiconductor Process, Power Conditioning Features - Operating Temperature -40°C ~ 155°C. - Resistance Tolerance K(±10%), M(±20%). - Typical resistance range 470 ohm ~ 100 Kohm. - Replaces 1 and 2 watt carbon composition resistors. - Suitable for noise suppressor of engine ignition system. - High peak power, Reliable with non-disconnection failure. - Rated Wattage up 5W, meets high energy density demands. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 02 TOKEN d RMCC Surge Metal Ceramic Resistors General Specifications (Unit: mm) H Model RMC RMC RMC RMC Style C C C C Rated Wattage 1 2 3 5 L Dimensions (mm) D H 4.8±0.5 4.8±0.5 4.8±0.5 7.8±0.5 D L 11±1.5 19±1.5 25±2.0 25±2.0 d 0.8±0.05 0.8±0.05 0.8±0.05 1.0±0.05 25±2 25±2 25±2 30±3 Electrical Characterisics Item Power Rating at 25°C (W) Operating Temp. Range (°C) RMCC 1 2 3 5 -40 ~ 155 K(±10%), M(±20%) 1K ~ 56K 1K ~ 100K 350 400 -750 ~ 3300 -750 ~ 3300 -750 ~ 2600 -750 ~ 2600 15 20 10 10 Resistance Tolerance Resistance Range (Ω) Max. Working Voltage (V) 25°C~ 40°C T.C.R (PPM/°C) 25°C~155°C Max. Pulse Voltage (KV) Moisture Resistance (%) 510 ~ 33K 300 -750 ~ 3300 -750 ~ 2600 8 10 470 ~ 33K 500 -750 ~ 3300 -750 ~ 2600 25 10 Note: Non-Inductive Performance: 1. Chemically inert and thermally stable, the resistors are inherently non-inductive because of their bulk ceramic construction, which allows energy and power to be uniformly distributed through the entire ceramic resistor body with no film or wire to fail. 2. The bulk ceramic material also allows simple efficient resistor designs that enable the designer to minimize the resistor package size while providing the required performance and reliability. How to Order RMC  2W  c  51K  K   Part Number: RMC  Rated Power (W): 1W, 2W, 3W, 5W  Style: c Style  Resistance Value (Ω) Code 510R 5K1 51K 68K Resistance Value (Ω) 510Ω 5.1KΩ 51KΩ 68KΩ  Resistance Tolerance Code K M Resistance Tolerance ±10% ±20% Back to 1st Page -Metal Ceramic Resistors (RMCC) 02 of 02 http://www.token.com.tw/ rfq token.com.tw Version 2010